MACH 1 and 2 CPLD Families
High-Performance EE CMOS Programmab
FEATURES
x
x
x
x
x
x
x
x
x
x
x
x
x
High-performance electrically-erasable CMOS PLD families
32 to 128 macrocells
44 to 100 pins in cost-effective PLCC, PQFP and TQFP packages
SpeedLocking™ – guaranteed fixed timing up to 16 product terms
Commercial 5/5.5/6/7.5/10/12/15-ns t
PD
and Industrial 7.5/10/12/14/18-ns t
PD
Configurable macrocells
— Programmable polarity
— Registered or combinatorial outputs
— Internal and I/O feedback paths
— D-type or T-type flip-flops
— Output Enables
— Choice of clocks for each flip-flop
— Input registers for MACH 2 family
JTAG (IEEE 1149.1)-compatible, 5-V in-system programming available
Peripheral component interconnect (PCI) compliant at 5/5.5/6/7.5/10/12 ns
Safe for mixed supply voltage system designs
Bus-Friendly™ inputs and I/Os reduce risk of unwanted oscillatory outputs
Programmable power-down mode results in power savings of up to 75%
Supported by Vantis DesignDirect™ software for rapid logic development
— Supports HDL design methodologies with results optimized for Vantis
— Flexibility to adapt to user requirements
— Software partnerships that ensure customer success
Lattice/Vantis and third-party hardware programming support
— Lattice/VantisPRO™ (formerly known as MACHPRO
®
) software for in-system program
support on PCs and Automated Test Equipment
— Programming support on all major programmers including Data I/O, BP Microsystem
and System General
Publication#
14051
Amendment/0
Rev:
K
Issue Date:
November 1998
Table 1. MACH 1 and 2 Family Device Features
1
Feature
Macrocells
Maximum user I/O pins
t
P D
(ns)
t
S
(ns)
t
CO
(ns)
f
CNT
(MHz)
MACH111 (SP)
32
32
5.0
3.5
3.5
182
MACH131 (SP)
64
64
5.5
3.0
4
182
MACH211 (SP)
64
32
7.5 (6.0)
5.5 (5)
4.5 (4)
133 (166)
MACH221 (SP)
96
48
7.5
5.5
5
133
MA
1
Note:
1. Values in parentheses ( ) are for the SP version.
GENERAL DESCRIPTION
The MACH
®
1 & 2 families from Lattice/Vantis offer high-performance, low cost Compl
Programmable Logic Devices (CPLDs), addressing the growing need for speed in netwo
telecommunications and computing. MACH 1 & 2 devices are available in speeds as fast
t
PD
and in densities ranging from 32 to 128 macrocells (Tables 1 and 2). The overall be
users include guaranteed high performance for entry-to-mid-level logic needs at a low
Table 2. MACH 1 and 2 Family Speed Grades
1
Device
MACH111
MACH111SP
MACH131
MACH131SP
MACH211
MACH211SP
MACH221
MACH221SP
MACH231
MACH231SP
Notes:
1. C = Commercial, I = Industrial
2. -5 speed grade for MACH111 (SP) = 5.0 ns t
PD
3. -5 speed grade for MACH131(SP) = 5.5 ns t
PD
C
C
-5
C (Note 2)
C (Note 2)
C (Note 3)
C (Note 3)
-6
-7
C, I
C, I
C, I
C, I
C
C
C
C
C
-10
C, I
C, I
C, I
C, I
C, I
C, I
C, I
C, I
C
C
-12
C, I
C, I
C, I
C, I
C, I
C, I
C, I
C, I
C, I
C, I
-14
I
I
I
I
I
I
I
I
I
I
-15
C
C
C
C
C
C
C
C
C
C
The MACH 1 & 2 families consist of ten devices—five base options, each with a counte
includes JTAG-compatible in-system programming (ISP). These devices offer five differen
I/O combinations in Thin Quad Flat Pack (TQFP), Plastic Quad Flat Pack (PQFP), and P
Leaded Chip Carrier (PLCC) packages from 44 to 100 pins (Table 3). Each MACH 1 & 2
PCI compliant and includes other features such as SpeedLocking architecture for guarant
timing, Bus-Friendly inputs and I/Os, and programmable power-down mode for extra p
savings.
2
MACH 1 & 2 Families
Table 3. MACH 1 and 2 Family Package and I/O Options
Device
MACH111
MACH111SP
MACH131
MACH131SP
MACH211
MACH211SP
MACH221
MACH221SP
MACH231
MACH231SP
X
X
X
X
X
X
X
44-pin PLCC
X
X
44-pin TQFP
X
X
X
X
68-pin PLCC
84-pin PLCC
100-pin TQFP
100
Note:
1. The MACH110, MACH120, MACH130, MACH210, MACHLV210, MACH215, MACH220 and MACH230 are not liste
not recommended for new designs. However, they are still supported by Lattice/Vantis. For technical or sales suppo
your local Lattice/Vantis sales office or visit our Web site at www.vantis.com for more information.
Lattice/Vantis offers software design support for MACH devices in both the MACHXL
®
a
DesignDirect development systems. The DesignDirect development system is the Lattice
implementation software that includes support for all Lattice/Vantis CPLD, FPGA, and S
devices. This system is supported under Windows ’95, ’98 and NT as well as Sun Solaris a
DesignDirect software is designed for use with design entry, simulation and verification
from leading-edge tool vendors such as Cadence, Exemplar Logic, Mentor Graphics, Mo
Technology, Synopsys, Synplicity, Viewlogic and others. It accepts EDIF 2 0 0 input ne
generates JEDEC files for Lattice/Vantis PLDs and creates industry-standard EDIF, Verilo
compliant VHDL and SDF simulation netlists for design verification.
DesignDirect software is also available in product configurations that include VHDL and
synthesis from Exemplar Logic and VHDL, Verilog RTL and gate level timing simulation fro
Technology. Schematic capture and ABEL entry, as well as functional simulation, are also
MACH 1 & 2 Families
FUNCTIONAL DESCRIPTION
Each MACH 1 and 2 device consists of multiple, optimized PAL
®
blocks interconnected by
matrix. The switch matrix allows communication between PAL blocks, and routes inputs t
blocks. Together, the PAL blocks and switch matrix allow the logic designer to create larg
in a single device instead of using multiple devices.
Clock/Input Pins
Output
Macrocells
Array and
Allocator
I/O Pins
PAL Block
Buried
Macrocells
Buried Macrocell Feedback
Output Macrocell Feedback
I/O Pin Feedback
(note 1)
I/O Cells
I/O Pins
PAL Block
Switch Matrix
PAL Block
14
Note:
1. There are no buried macrocells in MACH 1 devices. All macrocells are output macrocells.
Device
MACH111(SP)
MACH131(SP)
MACH211(SP)
MACH221(SP)
MACH231(SP)
PAL Blocks
2
4
4
8
8
Macrocells per Block
16
16
16
12
16
I/Os per Block
16
16
8
6
8
Dedicated Input
Product Terms pe
70
70
68
52
68
Figure 1. Overall Architecture of MACH 1 & 2 Devices
The switch matrix takes all dedicated inputs and signals from the input switch matrices a
them as needed to the PAL blocks. Feedback signals that return to the same PAL block
go through the switch matrix. This mechanism ensures that PAL blocks in MACH device
communicate with each other with guaranteed fixed timing (SpeedLocking).
The switch matrix makes a MACH device more advanced than simply several PAL dev
single chip. It allows the designer to think of the device not as a collection of blocks,
single programmable device; the software partitions the design into PAL blocks throu
central switch matrix so that the designer does not have to be concerned with the int
architecture of the device.
4
MACH 1 & 2 Families
Each PAL block consists of the following elements:
x
Product-term array
x
Logic Allocator
x
Macrocells
x
I/O cells
Each PAL block additionally contains an asynchronous reset product term and an async
preset product term. This allows the flip-flops within a single PAL block to be initialized a
There are also output enable product terms that provide tri-state control for the I/O cel
Product-Term Array
The product-term array consists of a number of product terms that form the basis of the lo
implemented. The inputs to the AND gates come from the switch matrix (Table 4), and
provided in both true and complement forms for efficient logic implementation.
Because the number of product terms available for a given function is not fixed, the ful
products is not realized in the array. The product terms drive the logic allocator, which
the appropriate number of product terms to generate the function.
Table 4. PAL Block Inputs
Device
MACH111
MACH111SP
MACH131
MACH131SP
MACH211
Number of Inputs to PAL Block
26
26
26
26
26
MACH221
MACH221SP
MACH231
MACH231SP
Device
MACH211SP
Number of Inputs to
26
26
26
32
32
Logic Allocator
The logic allocator (Figure 2) is a block within which different product terms are allocat
appropriate macrocells in groups of four product terms called “product term clusters”. T
availability and distribution of product term clusters is automatically considered by the so
it fits functions within the PAL block. The size of the product term clusters has been de
provide high utilization of product terms. Complex functions using many product terms
possible, and when few product terms are used, there will be a minimal number of unu
wasted, product terms left over.
The product term clusters do not “wrap” around the logic block. This means that the m
at the ends of the block have fewer product terms available (Tables 5, 6, 7, 8).
MACH 1 & 2 Families
京公网安备 11010802033920号
EEWORLD
