CW SERIES
|
240 VAC
PANEL MOUNT SOLID STATE RELAYS
The Sensata | Crydom CW Series Panel Mount AC output Solid State Relays offer a back-to-back SCR output for reliable switching of commercial
and heavy industrial loads. This type of high performing SSR is available with output ratings from 10 Amps up to 125 Amps at 24 to 280 VAC.
The CW Series panel mount solid state relay includes a removable IP20 “touch-safe” cover for added safety and is also available with zero voltage
turn-on (for resistive loads) or instantaneous turn-on (for inductive loads) outputs.
Features
•
•
•
•
•
•
•
•
•
•
•
Ratings from 10 A to 125 A @ 24-280 VAC
SCR Output for heavy industrial loads
LED Status Indicator
UL/CSA/TUV Approved, CE Compliant to EN60950-1
Improved SEMS screw and washer
Redesigned housing with anti-rotation barriers
AC or DC control and Universal AC/DC control
EMC Compliant to Level 3
Epoxy Free Design
Removable IP20 touch-safe cover
DBC substrate for superior thermal performance
PRODUCT SELECTION
Control Voltage
3-32 VDC
90-280 VAC
18-36 VAC
20-48 VDC/20-280 VAC
10 A
CWD2410
CWA2410
CWA2410E
CWU2410
25 A
CWD2425
CWA2425
CWA2425E
CWU2425
50 A
CWD2450
CWA2450
CWA2450E
CWU2450
90 A
CWD2490
CWA2490
CWA2490E
CWU2490
125 A
CWD24125
CWA24125
CWA24125E
CWU24125
SPECIFICATIONS
Output
(1)
Description
Operating Voltage (47-440Hz) [Vrms]
Transient Overvoltage [Vpk]
(2)
Maximum Off-State Leakage Current @ Rated Voltage
[mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec]
Maximum Load Current [Arms]
(3)
Minimum Load Current [Arms]
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum 1/2 Cycle I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec]
Copyright © 2019 Sensata Technologies, Inc.
10 A
24-280
600
1
500
10
150
380/400
1.3
0.35
720/660
25 A
24-280
600
1
500
25
150
570/600
1.3
0.3
1620/1500
50 A
24-280
600
1
500
50
150
810/850
1.3
0.2
3280/3000
90 A
24-280
600
1
500
90
250
1290/1350
1.3
0.16
8320/7560
125 A
24-280
600
1
500
125
250
1900/2000
1.25
0.11
18000/16600
Page 1
www.sensata.com
Minimum Power Factor (with Maximum Load)
(2)
HP Rating UL 508/IEC60947 [-10 Option][HP (KW)]: 120 VAC
HP Rating UL 508/IEC60947 [-10 Option][HP (KW)]: 240 VAC
HP Rating UL 508/IEC60947 [HP (KW)]: 120 VAC
HP Rating UL 508/IEC60947 [HP (KW)]: 240 VAC
0.5
0.5 (0.37)
1.5 (1.1)
0.5 (0.37)
1.5 (1.1)
0.5
1 (0.74)
3 (2.2)
0.75 (0.56)
2 (1.5)
0.5
2 (1.5)
5 (3.73)
1 (0.74)
3 (2.2)
0.5
3 (2.24)
7.5 (5.6)
2 (1.5)
5 (3.73)
0.5
5 (3.37)
10 (7.5)
3 (2.24)
7.5 (5.6)
Input
(1)
Description
Control Voltage Range
Maximum Reverse Voltage
Minimum Turn-On Voltage
Must Turn-Off Voltage
Minimum Input Current (for on-state)
Maximum Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
CWD
3-32 VDC
-32 VDC
3 VDC
(5)
1 VDC
10 mA
15 mA
Current Regulated
1/2 Cycle
(6)
1/2 Cycle
CWA
90-280 VAC
(4)
-
90 VAC
10 VAC
6 mA
10 mA
Current Regulated
20
30
CWAxxxxE
18-36 VAC
-
18 VAC
4 VAC
13 mA
15 mA
Current Regulated
20
30
CWU
20-48 VDC/ 20-280 VAC
-
19 VDC/VAC
5 VDC/VAC
7/13 mA
11/9 mA
Current Regulated
20
30
General
(1)
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
(7)
Ambient Storage Temperature Range
Weight (typical)
Housing Material
Baseplate Material
Input Terminal Screw Torque Range (lb-in/Nm)
Load Terminal Screw Torque Range (lb-in/Nm)
SSR Mounting Screw Torque Range (lb-in/Nm)
Input/Output Terminal Screw Thread Size
Humidity per IEC60068-2-78
LED Input Status Indicator
MTBF (Mean Time Between Failures) at 40°C ambient
temperature
(8)
MTBF (Mean Time Between Failures) at 60°C ambient
temperature
(8)
Parameters
4000 Vrms
10
9
Ohms
8 pF
-40 to 80 °C
-40 to 125 °C
2.88 oz (81.53 g)
UL94 V-0
Aluminum
13-15 /1.5-1.7
18-20 / 2-2.2
18-20 / 2-2.2
#6-32 UNC / #8-32 UNC
93% non-condensing
Green
11,641,553 hours (1,328 years)
7,210,376 hours (823 years)
Page 2
Copyright © 2019 Sensata Technologies, Inc.
www.sensata.com
WIRING DIAGRAM
(9)
Recommended Wire Sizes
Terminals
Input
Output
Wire Size
(Solid / Stranded)
24 AWG (0.2 mm
2
) / 0.2 [minimum]
2 x 12 AWG (3.3 mm
2
) / 3.3 [maximum]
20 AWG (0.5 mm
2
) / 0.518 [minimum]
2 x 10 AWG (5.3 mm
2
) / 5.3
2 x 8 AWG (8.4 mm
2
) / 8.4 [maximum]
Wire Pull-Out
Strength (lb)[N]
10 [44.5]
90 [400]
30 [133]
110 [490]
90 [400]
EQUIVALENT CIRCUIT BLOCK DIAGRAMS
CWD Series DC Control
CWA/CWU Series AC Control
MECHANICAL SPECIFICATIONS
(1)
*Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters]
Screw Termination, IP20
Page 3
Copyright © 2019 Sensata Technologies, Inc.
www.sensata.com
SURGE CURRENT INFORMATION
THERMAL DERATE INFORMATION
(i)
SSR metal base plate acting as heat sink, it must be exposed to free ambient air.
Page 4
Copyright © 2019 Sensata Technologies, Inc.
www.sensata.com
ORDERING OPTIONS
Example : CWA2410EPH-10
Not all part number combinations are available.
Contact Technical Support for information on the availability of a specific part number.
CW
-
A
-
24
-
10
-
E
-
P
-
H
-
-10
Series
CW
Control Voltage
D:
3-32 VDC
U:
20-48 VDC or 20-280 VAC
A:
90-280 VAC
AxxxxE:
18-36 VAC
Operating Voltage
24:
24-280 VAC
Rated Load Current
10:
10 Amps
25:
25 Amps
50:
50 Amps
90:
90 Amps
125:
125 Amps
Control Voltage
AxxxxE:
18-36 VAC
Overvoltage Protection
Blank:
Not Included
P:
Included
(2)
Thermal Pad
Blank:
Not Included
H:
Included
Switching Type
Blank:
Zero Voltage Turn-On
-10:
Instantaneous Turn-On
Required for valid part number
For options only and not required for valid part
number
GENERAL NOTES
All parameters at 25°C unless otherwise specified.
“P” option output will self trigger between 450-600 Vpk. Power factor 0.7 or higher, not suitable for capacitive loads.
(3)
Heat sinking required, see derating curves
(4)
For ambient temperature above 40°C the maximum control voltage must not exceed 250 VAC.
(5)
Increase minimum voltage by 1V for operations from -20 to -40°C.
(6)
Turn-on time for Instantaneous turn-on versions is 0.1 msec and 7msec for CWU models.
(7)
AC input models operating range is -20 to 80 °C.
(8)
All parameters at 50% power rating and 100% duty cycle (contact tech support for detailed report).
(9)
Load can be wired to either SSR output terminal 1 or 2.
(10)
Select P option for overvoltage protection.
(11)
For single surge pulse Tc=25°C; Tj=125°C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by √2 (1.414).
(1)
(2)
For additional information or specific questions, contact Technical Support
Page 5
Copyright © 2019 Sensata Technologies, Inc.
www.sensata.com
京公网安备 11010802033920号
EEWORLD
