Today I spent some time studying the low power mode of N32G45XVL and measured the power consumption data.First, I summarized the N32G457 low power consumption mode introduced in the manual and listed ...
When I saw the EEWORD article solicitation, I was immediately delighted. Finally, I had something to talk about. Since February 2017, the company was preparing to make a metal distance detection produ...
When operating the spi function of SSP, I found the following statement in lpc1100.h in the example program.
#define IOCON_SCKLOC (*(volatile unsigned long *)(IOCON_BASE + 0x110))
That is to say, the ...
I used STM32CUBE to develop an experimental program for STM32G431. I felt that the setting was 1K Hz, and the TIM6 clock was very slow. About 50 interrupt cycles, that is, 1S, was 10 times slower. Bec...
I want to use AHB mode and GPIO register mapping to turn on the light. Which registers do I need to configure? (I am using arm cortex M3 LM3S9B96) I configured the following, but it does not work. Is ...
In Keil compilation environment, in main, besides the initialization statement, there is only one loop: unsigned char i; for(i=0;i<10;i++) {Serial_One_SendData(i); } It should loop 10 times, and outpu...
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
1 Introduction
PROFIBUS is an international, open, and manufacturer-independent fieldbus standard. It is widely used in manufacturing automation, process industry automation, and automatio...[Details]
At very low temperatures, certain metals and alloys lose their resistance to electric
current
and become
superconductors
. Two parameters that are often measured are the transition ...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
0 Introduction
Under normal circumstances, the three-phase power in the power system is symmetrical, and they meet certain amplitude and phase conditions; but when the load changes, the syst...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]
It should be understood as follows: DC-DC means direct current to direct current (conversion of different DC power values). Anything that meets this definition can be called a DC-DC converter, incl...[Details]
There are many types and styles of digital voltmeters in design and development. Traditional digital voltmeters have their own characteristics. They are suitable for manual measurement on site. Tra...[Details]
Some people think: as long as the program runs well, it doesn't matter how the original program is written. But this is absolutely not the case. Software is not completed in one go, and it is neces...[Details]