5962-8971104JA datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> 5962-8971104JA

5962-8971104JA: DescriptionCorrelator, 1-Bit, CMOS, CDIP24,; CategoryThe embedded processor and controller Microcontrollers and processors; File Size121KB，15 Pages; ManufacturerRaytheon Company; Websitehttps://www.raytheon.com/

Download Datasheet Parametric Compare View All

5962-8971104JA Overview

Correlator, 1-Bit, CMOS, CDIP24,

5962-8971104JA Parametric

Parameter Name	Attribute value
Reach Compliance Code	unknown
boundary scan	NO
maximum clock frequency	50 MHz
External data bus width	1
JESD-30 code	R-CDIP-T24
JESD-609 code	e0
low power mode	NO
Number of terminals	24
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Output data bus width	1
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Certification status	Not Qualified
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	NO
technology	CMOS
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	THROUGH-HOLE
Terminal location	DUAL
uPs/uCs/peripheral integrated circuit type	DSP PERIPHERAL, CORRELATOR
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Added device types 03 and 04, added vendor CAGE code 65896 as vendor for

device type 01. Modified figure 3 waveforms. Editorial changes throughout.

Update boilerplate to current MIL-PRF-38535 requirements. - CFS

DATE (YR-MO-DA)

92-08-04

APPROVED

Monica L. Poelking

06-02-27

Thomas M. Hess

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Christopher A. Rauch

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

Tim H. Noh

APPROVED BY

Don Cool

DRAWING APPROVAL DATE

07 November 1989

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

http://www.dscc.dla.mil

MICROCIRCUIT, DIGITAL, CMOS 64-BIT

OUTPUT CORRELATOR, MONOLITHIC SILICON

AMSC N/A

REVISION LEVEL

SIZE

CAGE CODE

67268

1 OF

5962-89711

DSCC FORM 2233

APR 97

SHEET

5962-E130-06

1.4 Recommended operating conditions.

Supply voltage range (V

) ....................................................................................................... 4.5 V dc to 5.5 V dc

Clock pulse width, low, clocks, LDR (t

PWL

Device type 01 ................................................................................................................... 15 ns minimum

Device type 02 ................................................................................................................... 14 ns minimum

Device type 03 ................................................................................................................... 14 ns minimum

Device type 04 ................................................................................................................... 10 ns minimum

Clock pulse width, high, clocks, LDR (t

PWH

Device type 01 ................................................................................................................... 15 ns minimum

Device type 02 ................................................................................................................... 14 ns minimum

Device type 03 ................................................................................................................... 14 ns minimum

Device type 04 ................................................................................................................... 8 ns minimum

Data input setup time, correlator, IO

0-6

SCOR

Device type 01 ................................................................................................................... 14 ns minimum

Device type 02 ................................................................................................................... 10 ns minimum

Device type 03 ................................................................................................................... 10 ns minimum

Device type 04 ................................................................................................................... 10 ns minimum

Data input setup time, shift register, A

, B

, M

SSR

Device type 01 ................................................................................................................... 13 ns minimum

Device type 02 ................................................................................................................... 10 ns minimum

Device type 03 ................................................................................................................... 10 ns minimum

Device type 04 ................................................................................................................... 9 ns minimum

Data input hold time, A

, B

, M

, IO

0-6

) .............................................................................. 0 ns minimum

Input low voltage (V

)................................................................................................................ 0.8 V dc maximum

Input high voltage (V

).............................................................................................................. 2.0 V dc minimum

Input high voltage, A, B, M, S Clks (V

IHC

) .................................................................................. 2.4 V dc minimum

Output low current (I

) ............................................................................................................. 4.0 mA maximum

Output high current (I

) ........................................................................................................... -2.0 mA minimum

Case operating temperature range (T

) .................................................................................... -55°C to +125°C

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535

Integrated Circuits, Manufacturing, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883

MIL-STD-1835

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103

MIL-HDBK-780

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

(Copies of these documents are available online at

http://assist.daps.dla.mil/quicksearch/

http://assist.daps.dla.mil

or from

the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-89711

SHEET

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-

JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer

Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-

PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying

activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan

may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.

These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-

PRF-38535 is required to identify when the QML flow option is used.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535, appendix A and herein.

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.2.3 Block diagram. The block diagram shall be as specified on figure 2.

3.2.4 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 3.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full case operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are described in table I.

3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed

in 1.2 herein. In addition, the manufacturer's PIN may also be marked. For packages where marking of the entire SMD PIN

number is not feasible due to space limitations, the manufacturer has the option of not marking the "5962-" on the device.

3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance

to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in

accordance with MIL-PRF-38535 to identify when the QML flow option is used.

3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an

approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to

listing as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-PRF-38535,

appendix A and the requirements herein.

3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided

with each lot of microcircuits delivered to this drawing.

3.8 Notification of change. Notification of change to DSCC-VA shall be required for any change that affects this drawing.

3.9 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the manufacturer's

facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the

reviewer.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-89711

SHEET

5962-8971104JA Related Products

	5962-8971104JA	5962-8971104LA	5962-8971104JX	5962-89711013X	5962-8971101JX	5962-8971103LX	5962-8971103LA	5962-8971103JA	5962-8971103JX	5962-8971104LX
Description	Correlator, 1-Bit, CMOS, CDIP24,	Correlator, 1-Bit, CMOS, CDIP24,	Correlator, 1-Bit, CMOS, CDIP24, CERAMIC, DIP-24	Correlator, 1-Bit, CMOS, CQCC28, CERAMIC, LCC-28	Correlator, 1-Bit, CMOS, CDIP24, CERAMIC, DIP-24	Correlator, 1-Bit, CMOS, CDIP24, CERAMIC, DIP-24	Correlator, 1-Bit, CMOS, CDIP24,	Correlator, 1-Bit, CMOS, CDIP24,	Correlator, 1-Bit, CMOS, CDIP24, CERAMIC, DIP-24	Correlator, 1-Bit, CMOS, CDIP24, CERAMIC, DIP-24
Reach Compliance Code	unknown	unknown	unknown	unknown	unknown	unknown	unknown	unknown	unknown	unknown
boundary scan	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO
maximum clock frequency	50 MHz	50 MHz	50 MHz	25 MHz	25 MHz	35 MHz	35 MHz	35 MHz	35 MHz	50 MHz
External data bus width	1	1	1	1	1	1	1	1	1	1
JESD-30 code	R-CDIP-T24	R-CDIP-T24	R-CDIP-T24	S-CQCC-N28	R-CDIP-T24	R-CDIP-T24	R-CDIP-T24	R-CDIP-T24	R-CDIP-T24	R-CDIP-T24
low power mode	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO
Number of terminals	24	24	24	28	24	24	24	24	24	24
Maximum operating temperature	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C
Minimum operating temperature	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C
Output data bus width	1	1	1	1	1	1	1	1	1	1
Package body material	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED
encapsulated code	DIP	DIP	DIP	QCCN	DIP	DIP	DIP	DIP	DIP	DIP
Package shape	RECTANGULAR	RECTANGULAR	RECTANGULAR	SQUARE	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR
Package form	IN-LINE	IN-LINE	IN-LINE	CHIP CARRIER	IN-LINE	IN-LINE	IN-LINE	IN-LINE	IN-LINE	IN-LINE
Certification status	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified
Maximum supply voltage	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V
Minimum supply voltage	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V
Nominal supply voltage	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V
surface mount	NO	NO	NO	YES	NO	NO	NO	NO	NO	NO
technology	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS
Temperature level	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY
Terminal form	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE	NO LEAD	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE
Terminal location	DUAL	DUAL	DUAL	QUAD	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL
uPs/uCs/peripheral integrated circuit type	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR	DSP PERIPHERAL, CORRELATOR
Base Number Matches	1	1	1	1	1	1	1	1	1	-
package instruction	-	-	CERAMIC, DIP-24	CERAMIC, LCC-28	CERAMIC, DIP-24	CERAMIC, DIP-24	-	-	CERAMIC, DIP-24	CERAMIC, DIP-24
Filter level	-	-	MIL-STD-883	MIL-STD-883	MIL-STD-883	MIL-STD-883	-	-	MIL-STD-883	MIL-STD-883

Recommended Resources

Do you know Nordic nRF52840 multi-protocol SoC?

Working principle diagram of a household switching power supply

8-bit digital counter circuit

SC3071X touch step dimming light circuit

Voltage controlled current source circuit

AC induced voltage suppression circuit

There is a problem in applying for TI samples: It's very urgent. Why is this happening? The sample is removed...; hackerone MCU

The joys and sorrows of UWB (Ultra-Wideband): UWBWisair 480Mbps Ultra-Wideband (UWB) Transceiver ModuleUWB DecaWave DW1000 Two-Way Ranging DiscussionIntroduction to Common Short-Range Wireless Communication TechnologiesPractical Information 3 - R...; btty038 RF/Wirelessly

About MSP430F149 Flash Issue: About MSP430F149 Flash Issue I want to store data in on-chip Flash after data collection. The board I made myself uses an 8M crystal oscillator instead of a 32K one. Now the program can be downloaded ...; glphighlj Microcontroller MCU

LCM display buffer: [size=4] As long as the data to be displayed is placed in the display buffer, the content can be displayed on the screen. This buffer is a memory area that we open up when programming. Generally, we o...; fish001 DSP and ARM Processors

ez430-Chronos-433 wireless watch host computer software problem: [i=s] This post was last edited by lidonglei1 on 2014-6-25 09:34 [/i] I want to modify and update the Control Center host softwareThere is a source code in the development data, the path is as follows...; lidonglei1 Microcontroller MCU

USB written in VHDL: Here is the source code of USB written in VHDL and some USB related information for your reference! [[i] This post was last edited by wscsyyych on 2008-10-25 10:21 [/i]]...; wscsyyych FPGA/CPLD

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components