Features
•
•
•
•
•
•
•
•
•
•
•
Full-Frame Image Sensor 4096 x 4096 Pixels
11 µm x 11 µm Photo-MOS Pixel with 100% Aperture
Image Zone: 45 x 45 mm
Frame Readout Through One, Two or Four Outputs
Data Rates Up to 4 x 40 MHz (Compatibility with 7, 4 Frames/Second)
True 12-bit High Dynamic Range
Very Low Readout Noise
Very Low Dark Current (MPP Mode)
Optimized Resolution and Responsivity in the 400 - 1100 nm Spectrum
On-chip Thermometer for Each Quarter
Additional Full-Frame Operating Modes:
– 4/3 Aspect Ratio: 4096 x 3072
– 2/1 Aspect Ratio: 4096 x 2048
– Binning 2 x 2 Pixels (Format 2048 x 2048 Pixels of 22 x 22 µm)
– Binning 4 x 4 Pixels (Format 1024x 1024 Pixels of 44 x 44 µm)
•
On-request Frame Transfer Architecture:
– 2048 Active Lines, One Memory Zone with Frame Readout Through One or Two
Outputs
– 2048 Active Lines, Two Memories Zones with Frame Readout Through Two or Four
Outputs
16 M-Pixels
Sensor
AT71201M
Preliminary
Applications
Flexibility and performance makes this device suitable for digital photography, graphic
arts, medical or industrial applications and scientific analysis.
Description
Atmel's AT71201M is a full-frame sensor based on charge-coupled device (CCD)
technology. It can be used in a wide range of applications thanks to operating mode
flexibility, very high definition and high dynamic range.
The nominal photosensitive area is made up of 4096 x 4096 useful pixels and is split
into four independent zones that are driven separately by four independent four-phase
clock sets. Thus the sensor can be used in up to 12 main modes.
The large format and high definition make the device suitable for any application
requiring precision.
The high sensitivity of the 11 x 11 µm pixels with 100% fill factor provides a large
bandwidth of response with up to 1100 nm wavelength.
Two serial registers and four independent output amplifiers offer a high-frequency
functionality at 40 MSPS and up to 7.4 frames per second with a high signal to noise
ratio.
Rev. 5328A–IMAGE–05/03
1
AT71201M
Architectural
Overview
General Parameters
Table 2.
General Parameters
Parameter
Pixel size
Number of useful pixels per line
Number of useful lines
Number of extra lines
Number of readout registers
Number of prescan CCD stages (per output)
Number of dark references (cells per line)
Number of outputs (2 per register)
MPP mode/low dark current mode
Anti-blooming functionality
Binning (summation) mode
Pixel clocking mode
Readout Register clocking mode
Specific functions
Notes:
Value
11 x 11 µm²
4096
4096
8 per register
2
16
24
4
(1)
Yes (image zone)
no
Yes
(2)
4-phase
2-phase
Thermometer
1. The full-frame version can be read through one, two or four outputs
2. The lines summation into the register is made by a specific timing diagram. The inte-
gration time should be adapted to prevent charge overflow.
A specific clock allows column summation.
The pixel size is 11 x 11µm
2
with 100% fill factor (photo-MOS technology).
The sensor is compatible with a 180° rotation.
The image zone commands are split in 4 horizontal areas. The combination of the
ΦPij
clocks allows various transfer configurations.
The serial registers are driven by 8
ΦLi
clocks. An adapted combination of them allows
transfers of 100% of stages to the right side or the left side or 50% in each direction.
5
5328A–IMAGE–05/03
Power technology
京公网安备 11010802033920号
EEWORLD
