TO-220-3 (2) ,TO-220F-3, TO-252-2 (1) and TO-263-2
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Available in “Green” Packages: TO-220-3 (2), TO-220F-3, TO-
252-2 (1) and TO-263-2
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Description
High voltage dual Schottky rectifier suited for switch mode power
supplies and other power converters. This device is intended for use
in medium voltage operation, and particularly, in high frequency
circuits where low switching losses and low noise are required.
The MBR10100C is available in standard TO-220F-3, TO-220-3 (2),
TO-263-2 and TO-252-2 (1) packages.
Mechanical Data
Applications
Power Supply Output Rectification
Power Management
Instrumentation
Case: TO-220-3 (2), TO-220F-3, TO-252-2 (1) and TO-263-2
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Terminals: Finish - Matte Tin Annealed over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Below
Weight
TO-220-3 (2), TO-220F-3 and TO-263-2 – 1.9 Grams
(Approximate)
TO-252-2 (1) – 0.31Grams (Approximate)
TO-220F-3
TO-220-3 (2)
TO-263-2
TO-252-2 (1)
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
1. Mountains will fall if you rely on them, people will run away if you rely on them , only yourself is the most reliable.2. No one will accompany you for a lifetime, so you have to adapt to lonelines...
Experimental equipment: one PC, 4 sets of STC+C1101+LCD display. Envisioned solution: 1. Use the serial port to send the data in the PC to No. 1, and No. 1 will pass the information to No. 2 through t...
[b][size=3]During TI's latest Bluetooth technology online seminar on April 12, 2017, many netizens asked many questions. TI engineers answered and sorted out everyone's common questions after the meet...
I cannot generate NK.nbo under WINCE5.0. Later, I read related articles online and learned that I need to modify the config.bib file and add the following parameters: ROMSTART ROMWIDTH ROMSIZE ROMSIZE...
The circuit diagram is as shown in the figure. The power amplifier is OPA544, the power supply is ±12V, the input of the same direction input is 4V, the gain G=+1.5, the output voltage is 6V, the load...
Talking
京公网安备 11010802033920号
EEWORLD
