SPECIFICATION CONTROL DRAWING
TITLE
55PC6217
Date
Revision
TWO CONDUCTOR CABLE, DOUBLE SHIELDED,
DOUBLE JACKETED, 600 VOLT
12-14-01
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
COMPONENT WIRES - 55PC0116
SHIELDS - NICKEL-COATED COPPER
JACKETS -
RADIATION-CROSSLINKED,
MODIFIED ETFE
CONSTRUCTION DETAILS
1ST
SHIELD
SIZE
(AWG)
38
38
38
38
38
1ST JACKET
THICKNESS (in.)
LOWER
SPEC
LIMIT
.0040
.0040
.0040
.0040
.0040
TARGET
WALL
.0050
.0050
.0050
.0050
.0050
2ND
SHIELD
SIZE
(AWG)
38
38
38
38
38
2ND JACKET
THICKNESS (in.)
LOWER
SPEC
LIMIT
.0080
.0080
.0080
.0080
.0080
TARGET
WALL
.0100
.0100
.0100
.0100
.0100
LOWER
SPEC
LIMIT
.129
.141
.157
.177
.192
DIAMETER
( in.)
TARGET
VALUE
.135
.147
.163
.183
.198
UPPER
SPEC
LIMIT
.141
.153
.169
.189
.204
WEIGHT
( lbs/1000 ft. )
TARGET
VALUE
19.57
23.28
28.71
36.66
42.64
UPPER
SPEC
LIMIT
20.66
24.43
30.01
37.85
43.90
PART NUMBER
CONDUCTOR
SIZE
(AWG)
24
22
20
18
16
55PC6217-24-*
55PC6217-22-*
55PC6217-20-*
55PC6217-18-*
55PC6217-16-*
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms)
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
DIELECTRIC WITHSTAND:
1500 volts (rms), 60 Hz, conductor to conductor & shield
500 volts (rms), 60 Hz, shield to shield
JACKET COLOR: White preferred
JACKET ELONGATION AND TENSILE STRENGTH:
Elongation, 50% (minimum) (each)
Tensile Strength, 5000 lbf/in² (minimum) (each)
JACKET FLAWS:
Spark Test, 1000 volts (rms), 100% test
Impulse Dielectric Test, 6.0 kV (peak), 100% test
COLOR AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681.
SHIELD COVERAGE: 85% (minimum) each shield
VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL):
1000 volts (rms), 60 Hz, 1 minute
PART NUMBER:
The "*" in the part numbers above shall be replaced by color code
designators with a slash separating the component wire colors, a
dash separating the component wire colors from the inner jacket
color and a dash separating the inner jacket color from the outer
jacket color.
Example: AWG 22, red and blue component wires;
white inner jacket and white outer jacket:
55PC6217-22-2/6-9-9
R
300 Constitution Drive, Menlo Park, California 94025
1-800-2 Raychem Fax: 1-650-361-6297
Page 1 of 1
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED
DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.