RNF-100
Flexible, flame-retardant, high performance,
polyolefin heat-shrinkable tubing
RNF-100 tubing is a high-quality,
heat-shrinkable product for a wide
variety of uses. It has become the
industry standard for insulation,
strain relief, wire bundling, and
color-coding in both commercial
and military applications. RNF-100
tubing meets the requirements of
AMS-DTL-23053/5, Class 1 (colors)
and Class 2 (clear).
It is also UL-recognized and
CSA-certified at 125°C, 600 V.
Made from flame-retardant polyolefin,
RNF-100 tubing has excellent
physical, chemical, and electrical
properties that meet industrial and
military requirements for a highly
reliable, general-purpose tubing.
It sets itself apart in that it offers
a higher level of performance at
elevated temperature, including
mechanical abrasion and fluid
resistance, than many heat-shrinkable
polyolefin tubings available in the
marketplace today.
Only a few sizes of RNF-100
tubing are required to cover many
substrate diameters.
Temperature rating
Minimum shrink temperature:
Continuous operating temperature:
121°C
–55°C to 135°C
Specifications*
®
®
Type
RNF-100 Type 1 (colors)
RNF-100 Type 2 (clear)
Raychem
RT-350 Type 1
RT-350 Type 2
Military
AMS-DTL-23053/5, Cl. 1
AMS-DTL-23053/5, Cl. 2
UL
E35586
CSA
LR31929
*When ordering, always specify latest issue.
Dimensions (millimeters/inches)
W
Expanded as supplied
D
Fully recovered after heating
d
Inside diameter
D (min.)
Expanded
as supplied
1.2
1.6
2.4
3.2
4.7
6.4
9.5
12.7
0.046
0.063
0.093
0.125
0.187
0.250
0.375
0.500
d (max.)
Recovered
after heating
0.6
0.8
1.2
1.6
2.4
3.2
4.8
6.4
0.023
0.031
0.046
0.062
0.093
0.125
0.187
0.250
Wall thickness
W
Recovered
after heating**
0.40 ± 0.08
0.016 ± 0.003
0.43 ± 0.08
0.017 ± 0.003
0.51 ± 0.08
0.020 ± 0.003
0.51 ± 0.08
0.020 ± 0.003
0.51 ± 0.08
0.020 ± 0.003
0.64 ± 0.08
0.025 ± 0.003
0.64 ± 0.08
0.025 ± 0.003
0.64 ± 0.08
0.025 ± 0.003
Inside diameter
D (min.)
Expanded
as supplied
19.1
0.750
25.4
1.000
31.7
1.250
38.1
1.500
50.8
2.000
76.2
3.000
101.6
4.000
127.0
5.000
d (max.)
Recovered
after heating
9.5
0.375
12.7
0.500
15.9
0.625
19.1
0.750
25.4
1.000
38.1
1.500
50.8
2.000
63.5
2.500
Wall thickness
W
Recovered
after heating**
0.77 ± 0.08
0.030 ± 0.003
0.89 ± 0.12
0.035 ± 0.005
1.02 ± 0.15
0.040 ± 0.006
1.02 ± 0.15
0.040 ± 0.006
1.14 ± 0.16
0.045 ± 0.007
1.27 ± 0.20
0.050 ± 0.008
1.40 ± 0.23
0.055 ± 0.009
1.53 ± 0.23
0.060 ± 0.009
Size
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
Size
3/4
1
1 1/4
1 1/2
2
3
4
5
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering information
Colors
Size selection
Standard packaging
Ordering description
Standard
Black (all sizes); clear, white, red, blue, green, and yellow (3/64” through 3”)
Nonstandard
Clear, white, red, blue, and yellow (4” and 5”); brown, orange, violet, and gray (all sizes)
Always order the largest size that will shrink snugly over the component being covered.
On spools or in 4 foot lengths
Specify product name, size, and color; for example, RNF-100-1/4-BK (BK=Black).
Specification values
Requirement
Type 1 (colors)
See Reverse
+0, -5
1500
(10.3)
minimum
200 minimum
2.5 X 10
4
(172)
maximum
1.35 maximum
No cracking
No dripping,
flowing, or cracking
Physical
Electrical
Chemical
Property
Dimensions
Longitudinal change
Tensile strength
Ultimate elongation
Secant modulus (as supplied)
Specific gravity
Low temperature flexibility
(4 hours at -55°C/-67°F)
Heat shock
(4 hours at 250°C/482°F)
Heat resistance
(336 hours at 175°C/347°F)
Followed by test for:
Ultimate Elongation
Color
Color stability
(48 hours at 175°C/347°F)
Dielectric strength
Volume resistivity
Copper mirror corrosion
(16 hours at 175°C/347°F)
Copper contact corrosion
(168 hours at 160°C/320°F)
Copper stability
(16 hours at 160°C/320°F)
Followed by test for:
Ultimate Elongation
Flammability
Unit
mm
(inches)
percent
psi
(Mpa)
percent
psi
(Mpa)
Type 2 (clear)
See Reverse
+0, -5
1500
(10.3)
minimum
200 minimum
2.5 X 10
4
(172)
maximum
1.0 maximum
No cracking
No dripping,
flowing, or cracking
Method of test
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
AMS-DTL-23053
AMS-DTL-23053
ASTM D 2671
percent
150 minimum
MIL-STD-104
MIL-STD-104
500
(19,680)
minimum
10
14
minimum
No removal of copper
No pitting or blackening
of copper
No brittleness, glazing,
cracking, or severe
discoloration of tubing
150 minimum
ASTM D 2671
MIL-STD-104
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
Procedure A
ASTM D 2671
Procedure B
ASTM D 2671
Procedure B
volts/mil
(volts/mm)
ohm-cm
500
(19,680)
minimum
10
16
minimum
No removal of copper
No pitting or blackening
of copper
No brittleness, glazing,
cracking, or severe
discoloration of tubing
200 minimum
percent
volts/mil
(volts/mm)
psi
(Mpa)
400
(15,760)
minimum
1000
(6.9)
minimum
400
(15,760)
minimum
1000
(6.9)
minimum
ASTM D 2671
ASTM D 2671
Note: Consult RT-350 for specific details about test procedures.
Raychem is a trademark of Tyco Electronics Corporation.
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025-1164
USA
Tel: (800) 926-2425 (US & Canada)
Tel: +1 (650) 361-3860 (All other countries)
Faraday Road
Dorcan, Swindon, SN3 5HH
United Kingdom
Tel: +44 1793 528171
3816 Noborito, Tama-ku
Kawasaki, Kanagawa 214-8533
Japan
Tel: +81 44 900 5102
Asia Pacific Headquarters
26 Ang Mo Kio, Industrial Park 2
Singapore 569507
Tel: +65 4866 151
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
© 1977, 1993, 1994, 2002 Tyco Electronics Corporation Printed in USA 1654054 Rev. 9/05
Fungus resistance
Water absorption
(24 hours at 23°C/73°F)
Fluid resistance
(24 hours at 23°C/73°F) in:
JP-8 fuel (MIL-T-5624)
Skydrol 500
Hydraulic fluid (MIL-H-5606)
Aviation gasoline100/300
(MIL-G-5572)
Water
Followed by tests for:
Dielectric strength
Tensile strength
percent
200 minimum
Self-extinguishing
within 1 minute, 25%
maximum flag burn
Rating of 1 or less
0.5 maximum
ASTM D 2671
ASTM D 2671
Procedure B
ASTM G 21
ASTM D 2671
ASTM D 2671
Rating of 1 or less
0.2 maximum
京公网安备 11010802033920号
EEWORLD
