TRSA
Heat-shrinkable marker sleeves.
Colour coded for instant identification, good fluid resistance, 3:1 shrink ratio.
TRSA markers are cut and printed
heat shrinkable sleeves suitable for
identifying wire and cables.
Standard kits, consisting of A-Z or
0-9, are available. Alternatively up
to 2 numbers may be printed on
each sleeve.
Easily and rapidly installed, TRSA
exhibits good resistance to common
fluids.
Temperature rating
Operating temperature range:
Minimum shrink temperature:
Minimum full recovery temperature:
-55ºC to +135ºC
+80ºC
+120ºC
Ordering information
TRSA product descriptions are built up from a series of codes as follows:
TRSA-colour code/product size code/cut length code/kit code or legend to be printed.
Colour Code
1010 Black
1011 Brown
1012 Red
1013 Orange
1014 Yellow
1015 Green
1016 Blue
1017 Violet
1018 Grey
1019 White
1111 Multi colored – only available as CC-KIT
Product Size Code
Inside Diameter
Expanded as supplied,
(min)
Code
A
C
E
mm
1.5
3.0
6.0
Wall Thickness
Recovered after
heating, (max)
mm
0.5
1.0
2.0
Standard package
Wall thickness
recovered after heating, (nom)
mm
0.45
0.55
0.65
Pack quantity
pieces
1000
1000
1000
Cut Length Code
Code
1
2
Kit Codes
AU-KIT
AL-KIT
N-KIT
CC-KIT
Cut Length (nom), mm
A
C
5
5
8
8
E
7
11
Pack quantity (pieces)
A-Z letters in upper case, available in sizes A,C & E.
a – z letters in lower case, available in sizes A,C & E.
Number 0 – 9, available in sizes A,C & E.
Ten resistor colors printed with the respective numeric codes, available in sizes C & E only.
26,000 (1000 per letter)
26,000 (1000 per letter)
10,000 (1000 per number)
10,000 (1000 per number)
Examples of TRSA descriptions
TRSA-1014/C/1/AU-KIT
TRSA-1015/A/1/1
Kit of upper case letters printed on yellow 3.0/1.0 size sleeves
Number 1 printed on green 1.5/0.5 sleeves
Performance
Test
Heat ageing
Dielectric strength
Flame retardancy
Fluid resistance
Test method
ISO 188(168h at 175ºC)
IEC 243
ASTM D876
24h at 23ºC, ISO 37
Test fluids
Test requirement
Ultimate elongation 150%(min)
20MV/m
Duration of burning 30s max
Tensile strength:
5MPa (min)
Ultimate elongation:
200%(min)
Aircraft fuel to ISO 1817 liquid B
Lubricating oil ISO 1817 liquid 101
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025-1164
USA
Tel: (800) 926-2425 (US & Canada)
Tel: +1 (650) 361-3860 (All other countries)
Tyco Electronics UK Ltd.
Faraday Road
Dorcan, Swindon, SN3 5HH
United Kingdom
Tel: +44 1793 528171
Tyco Electronics Raychem K.K.
3816 Noborito, Tama-ku
Kawasaki, Kanagawa 214-8533
Japan
Tel: +81 44 900 5102
Tyco Electronics Singapore Pte Ltd.
Asia Pacific Headquarters
26 Ang Mo Kio, Industrial Park 2
Singapore 569507
Tel: +65 4866 151
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability
regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and Conditions of Sale for these products and in no
case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of
the product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the
right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com and www.raychem.com
© 2001 Tyco Electronics Corporation R10203 2/02
京公网安备 11010802033920号
EEWORLD
