AMP DUOPLUG 2.5 MK II CON 9P SELEC LOAD.
| Parameter Name | Attribute value |
| Connector System | wire to board |
| Connector type | female end |
| Connectors and terminals terminate to | A printed circuit board |
| Connector type | card edge |
| Connector type | Connector components |
| Cable type | Stranded wire |
| Number of Positions | 9 |
| Rows | 1 |
| Connector terminal load status | selective loading |
| PCB mounting direction | right angle |
| Pre-installed | yes |
| Card entry method | side |
| pre-assembled | yes |
| hot swap | no |
| Operating Voltage | 250 V |
| color | nature |
| Cable exit angle | 90° |
| Terminal base material | Phosphor bronze |
| Contact Current Rating (Max) (A) | 2 |
| Terminal contact plating material | tin |
| Terminal contact plating thickness (µm) | 3 – 6 |
| Terminal termination area plating material | tin |
| Terminal type | socket |
| Cable termination method | Piercing crimping (IDC) |
| PCB installation and fixation | Without |
| Panel mount features | Without |
| PCB mounting alignment | Without |
| Lock clip position | none |
| Connector mounting type | Cable installation |
| Terminal positioning force | with |
| joint fixation | with |
| Joint alignment type | keying |
| Centerline (Pitch) | 2.5 mm [ .098 in ] |
| Shell color | nature |
| Shell material | PA 6 GF |
| Shell type | closed end |
| Accepts Wire Insulation Diameter Range | 1.6 mm [ .063 in ] |
| PCB thickness (recommended) | 1.5 mm [ .059 in ] |
| Cable size | 24 – 22 AWG [ .22 – .35 mm² ] |
| high | 7.3 mm [ .287 in ] |
| Acceptable wire insulation diameter range | 1.2 – 1.6 mm [ .047 – .063 in ] |
| Working group temperature range | -40 – 110 °C [ -40 – 230 °F ] |
| Circuit Application | Signal |
| Applicable to | PCB frame, male header |
| UL flammability rating | UL 94V-2 |
| Package quantity | 6160 |
| Encapsulation method | box |
京公网安备 11010802033920号
EEWORLD
