* See Page 5 for additional developed frequencies.
Check with factory for availability of frequencies not listed.
Description
CTS Model 407 incorporates a high Q quartz resonator and is ideal for supporting a wide range of commercial and
industrial applications.
Ordering Information
Model
407
Mode of
Oscillation
F
Tolerance
@ +25°C
3
Temperature Stability/Temperature Range
5
Load
Capacitance
D
Frequency
[MHz]
XXXMXXXX
Mode
Code
Fundamental
F
3rd Overtone
T
Code
-20°C
1
X
2
3
5
Stability
to +70°C
±10ppm
±15ppm
±20ppm
±30ppm
±50ppm
Code
-30°C
R
Y
N
4
8
Stability
to +85°C
±10ppm
±15ppm
±20ppm
±30ppm
±50ppm
Code
-40°C
-
W
6
7
9
Stability
to +85°C
-
±15ppm
±20ppm
±30ppm
±50ppm
Code
Frequency
Frequency
1
Code
1
X
2
3
Tolerance
±10ppm
±15ppm
±20ppm
±30ppm
Code Capacitance Code Capacitance
8pF
18pF
K
D
9pF
20pF
J
E
10pF
24pF
A
F
12pF
30pF
L
G
16pF
Series
C
S
Notes:
1] Frequency is recorded with 3 leading digits before the "M" and 4 significant digits after the "M" [including zeroes]. (Ex. XXXMXXXX [016M3840], XXXMXXXX
There are frequencies that have significant digits after the "M" that exceed the 4 digits. The remaining digits will be truncated from the CTS part number,
but the factory will calibrate to the full frequency desired. Examples below; P/N Frequency = Actual Frequency
13M5537 = 13.553750MHz
14M3181 = 14.318180MHz
16M6666 = 16.666670MHz
28M6363 = 28.636360MHz
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
Is Keil C the same as Silicon Lab IDE? If you use printf, the things to be displayed will only be sent to the serial port, not to the window of the software itself?...
I have several circuit boards with two BGA packaged chips on them. I'd like to ask if any friend can help me solder them. I'll pay for the processing fee and labor fee. 1. The size of a BGA packaged c...
LED can be divided into the following categories based on its application and market segmentation. Which field of LED are you interested in? Why not share your opinion?...
[font=宋体][size=4][Abstract] Based on TI's DSP chip TMS320F2812, the peripheral circuit is designed to realize a digital control hardware system, and on this basis, the corresponding software design is...
TIM1 triggers ADC conversion and samples DC signal. It is transferred to gm_SampleTempData.ACdata[150][2] via DMA. Only the first part of the group (about 50 or so) has the sampled DC digital quantity...
Embedded System
京公网安备 11010802033920号
EEWORLD
