All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods.
2
Including I
BSTQ
quiescent current.
3
The signal source driving the pin must have 70
µA
(typ) pull-down strength to make a high-to-low transient, and 20
µA
(typ) pull-up strength to make a low-to-high
transient. The pin does not represent load (<100 nA) in static low (<0.8 V) and static high (>2.0 V) logic states (see TPC 3.) The pin can be driven with standard
TTL logic level source.
4
Guaranteed by characterization.
5
For propagation delays, tpdh refers to the specified signal going high, tpdl refers to it going low.
6
Propagation delay measured until DRVL begins its transition.
7
The turn-on of DRVL is initiated after IN goes low by either V
SW
crossing a ~1.6 V threshold or by expiration of t
SWTO
.
Specifications subject to change without notice.
–2–
REV. B
ADP3415
ABSOLUTE MAXIMUM RATINGS*
PIN CONFIGURATION
VCC to GND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
BST to GND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +30 V
BST to SW . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
SW to GND . . . . . . . . . . . . . . . . . . . . . . . . . –2.0 V to +25 V
SD,
IN,
DRVLSD
to GND . . . . . . . . . . . . . . –0.3 V to +7.3 V
Operating Ambient Temperature Range . . . . . . 0°C to 100°C
Operating Junction Temperature Range . . . . . . 0°C to 125°C
It is really difficult to start learning driver by yourself. I want to set up a study group so that everyone can make progress faster. Moreover, Suzhou is a small place and there are still few profess...
After I used make zImage to compile the 2.6.13 kernel file, and burned the /arch/arm/boot/zImage file into the board, an error occurred during linux decompression. The error message is as follows: VIV...
[Author: Li Jinpeng, Yin Huajie, Hou Congling Reposted from: Polaris Electric TechnologyThe classification and basic physical characteristics of saturable inductors are introduced, and the application...
I want to find a CANDENCE and PADS that can be easily installed under WIN7 32-bit and 64-bit. I used to use XP, but now I am slowly changing to WIN7 and getting used to it. Thank you!...
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
1. Overview
At present, an information revolution is in the ascendant around the world, led by microelectronics, computers and communication technologies, and centered on information technolog...[Details]
1 Introduction
With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a kind of practical art for architectural decoration. When ther...[Details]
Overview
By transmitting ultrasonic energy into the human body and receiving and processing the returning reflected signals, phased array ultrasound systems can generate images of organs and s...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
The power supply is the core component of a computer. Although it is not of high value, all computer components rely on the switching power adapter to provide energy, so the stability of a power su...[Details]
Current
measurement:
Magnetic balance Hall current
sensor
is used
. The sensor can measure AC from DC to 100kHz.
In automatic measurement and control systems, it is often nec...[Details]
Today's automotive application developers face numerous design challenges as modern cars add more electronic functionality, while the need for lower power consumption and smaller printed circuit bo...[Details]
UDN2916LB is a two-phase stepper motor bipolar driver integrated circuit launched by SANKEN. It can drive dual-winding bipolar stepper motors and is particularly suitable for controlling dual-step ...[Details]
In the development direction of the automotive industry, electric vehicles (EV) and hybrid electric vehicles (HEV) are becoming an obvious trend. From a technical point of view, hybrid power is mor...[Details]
1 Overview
As a driving power source, the new battery has a range of more than 200 km within the acceptable weight range of the mass market, which provides an important way for power batteries...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
