Hardware
Documentation
Data S h e e t
HAL 5xy
Hall-Effect Sensor Family
®
Edition April 15, 2010
DSH000020_004E
HAL 5xy
Copyright, Warranty, and Limitation of Liability
The information and data contained in this document
are believed to be accurate and reliable. The software
and proprietary information contained therein may be
protected by copyright, patent, trademark and/or other
intellectual property rights of Micronas. All rights not
expressly granted remain reserved by Micronas.
Micronas assumes no liability for errors and gives no
warranty representation or guarantee regarding the
suitability of its products for any particular purpose due
to these specifications.
By this publication, Micronas does not assume respon-
sibility for patent infringements or other rights of third
parties which may result from its use. Commercial con-
ditions, product availability and delivery are exclusively
subject to the respective order confirmation.
Any information and data which may be provided in the
document can and do vary in different applications,
and actual performance may vary over time.
All operating parameters must be validated for each
customer application by customers’ technical experts.
Any new issue of this document invalidates previous
issues. Micronas reserves the right to review this doc-
ument and to make changes to the document’s content
at any time without obligation to notify any person or
entity of such revision or changes. For further advice
please contact us directly.
Do not use our products in life-supporting systems,
aviation and aerospace applications! Unless explicitly
agreed to otherwise in writing between the parties,
Micronas’ products are not designed, intended or
authorized for use as components in systems intended
for surgical implants into the body, or other applica-
tions intended to support or sustain life, or for any
other application in which the failure of the product
could create a situation where personal injury or death
could occur.
No part of this publication may be reproduced, photo-
copied, stored on a retrieval system or transmitted
without the express written consent of Micronas.
Micronas Trademarks
– HAL
DATA SHEET
Micronas Patents
Choppered Offset Compensation protected by
Micronas patents no. US5260614, US5406202,
EP0525235 and EP0548391.
Third-Party Trademarks
All other brand and product names or company names
may be trademarks of their respective companies.
2
April 15. 2010; DSH000020_004EN
Micronas
DATA SHEET
HAL 5xy
Contents
Page
4
4
4
5
5
5
6
7
8
8
13
13
13
13
14
15
16
22
22
24
26
28
30
32
34
36
38
40
42
44
46
46
46
46
46
48
Section
1.
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
2.
3.
3.1.
3.2.
3.3.
3.4.
3.4.1.
3.5.
3.6.
3.7.
4.
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
4.7.
4.8.
4.9.
4.10.
4.11.
4.12.
5.
5.1.
5.2.
5.3.
5.4.
6.
Title
Introduction
Features:
Family Overview
Marking Code
Operating Junction Temperature Range
Hall Sensor Package Codes
Solderability and Welding
Functional Description
Specifications
Outline Dimensions
Dimensions of Sensitive Area
Positions of Sensitive Areas
Absolute Maximum Ratings
Storage and Shelf Life
Recommended Operating Conditions
Characteristics
Magnetic Characteristics Overview
Type Description
HAL 501
HAL 502
HAL 503
HAL 504
HAL 505
HAL 506
HAL 507
HAL 508
HAL 509
HAL 516
HAL 519
HAL 523
Application Notes
Ambient Temperature
Extended Operating Conditions
Start-Up Behavior
EMC and ESD
Data Sheet History
Micronas
April 15. 2010; DSH000020_004EN
3
HAL 5xy
Hall Effect Sensor Family
in CMOS technology
Release Note: Revision bars indicate significant
changes to the previous edition.
1. Introduction
The HAL 5xy family consists of different Hall switches
produced in CMOS technology. All sensors include a
temperature-compensated Hall plate with active offset
compensation, a comparator, and an open-drain out-
put transistor. The comparator compares the actual
magnetic flux through the Hall plate (Hall voltage) with
the fixed reference values (switching points). Accord-
ingly, the output transistor is switched on or off.
The sensors of this family differ in the switching behav-
ior and the switching points.
The active offset compensation leads to constant mag-
netic characteristics over supply voltage and tempera-
ture range. In addition, the magnetic parameters are
robust against mechanical stress effects.
The sensors are designed for industrial and automo-
tive applications and operate with supply voltages from
3.8 V to 24 V in the ambient temperature range from
−40 °C
up to 150
°C.
All sensors are available in the SMD-package
SOT89B-1 and in the leaded versions TO92UA-1 and
TO92UA-2.
Type
501
502
503
504
505
506
507
508
509
516
519
Switching
Behavior
bipolar
latching
latching
unipolar
latching
unipolar
unipolar
unipolar
unipolar
unipolar with
inverted output
unipolar with
inverted output
(north polarity)
unipolar
Sensitivity
very high
high
medium
medium
low
high
medium
medium
low
high
high
1.2. Family Overview
DATA SHEET
The types differ according to the magnetic flux density
values for the magnetic switching points and the tem-
perature behavior of the magnetic switching points,
and the mode of switching.
see
Page
22
24
26
28
30
32
34
36
38
40
42
1.1. Features:
– switching offset compensation at typically 62 kHz
– operates from 3.8 V to 24 V supply voltage
– overvoltage protection at all pins
– reverse-voltage protection at V
DD
-pin
– magnetic characteristics are robust regarding
mechanical stress effects
– short-circuit protected open-drain output by thermal
shut down
– operates with static magnetic fields and dynamic
magnetic fields up to 10 kHz
– constant switching points over a wide supply volt-
age range
– the decrease of magnetic flux density caused by ris-
ing temperature in the sensor system is compen-
sated by a built-in negative temperature coefficient
of the magnetic characteristics
– ideal sensor for applications in extreme automotive
and industrial environments
– EMC corresponding to ISO 7637
523
low
44
Latching Sensors:
The output turns low with the magnetic south pole on
the branded side of the package and turns high with
the magnetic north pole on the branded side. The out-
put does not change if the magnetic field is removed.
For changing the output state, the opposite magnetic
field polarity must be applied.
Bipolar Switching Sensors:
The output turns low with the magnetic south pole on
the branded side of the package and turns high with
the magnetic north pole on the branded side. The out-
put state is not defined for all sensors if the magnetic
field is removed again. Some sensors will change the
output state and some sensors will not.
4
April 15. 2010; DSH000020_004EN
Micronas
DATA SHEET
HAL 5xy
1.4. Operating Junction Temperature Range
The Hall sensors from Micronas are specified to the
chip temperature (junction temperature T
J
).
A:
T
J
=
−40 °C
to +170
°C
K:
T
J
=
−40 °C
to +140
°C
Note:
Due to the high power dissipation at high current
consumption, there is a difference between the
ambient temperature (T
A
) and junction tempera-
ture. Please refer to Section 5.1. on page 46 for
details.
Unipolar Switching Sensors:
The output turns low with the magnetic south pole on
the branded side of the package and turns high if the
magnetic field is removed. The sensor does not
respond to the magnetic north pole on the branded
side.
Unipolar Switching Sensors with Inverted Output:
The output turns high with the magnetic south pole on
the branded side of the package and turns low if the
magnetic field is removed. The sensor does not
respond to the magnetic north pole on the branded
side.
Unipolar Switching Sensors with Inverted Output
Sensitive to North Pole:
The output turns high with the magnetic north pole on
the branded side of the package and turns low if the
magnetic field is removed. The sensor does not
respond to the magnetic south pole on the branded
side.
1.5. Hall Sensor Package Codes
HALXXXPA-T
Temperature Range: A or K
Package: SF for SOT89B-1
UA for TO92UA
Type: 5xy
Example:
HAL505UA-K
→
Type: 505
→
Package: TO92UA
→
Temperature Range: T
J
=
−40 °C
to +140
°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Ordering Codes for
Hall Sensors”.
1.3. Marking Code
All Hall sensors have a marking on the package sur-
face (branded side). This marking includes the name
of the sensor and the temperature range.
Type
A
HAL 501
HAL 502
HAL 503
HAL 504
HAL 505
HAL 506
HAL 507
HAL 508
HAL 509
HAL 516
HAL 519
HAL 523
501A
502A
503A
504A
505A
506A
507A
508A
509A
516A
519A
523A
Temperature Range
K
501K
502K
503K
504K
505K
506K
507K
508K
509K
516K
519K
523K
Micronas
April 15. 2010; DSH000020_004EN
5
stm32/stm8
京公网安备 11010802033920号
EEWORLD
