KEMET Part Number: T493C106K025BH6410
(07016-121KBHC)
T493_DLA, Tantalum, MnO2 Tantalum, COTS, 10 uF, 10%, 25 VDC, SMD, MnO2, Molded, DLA Drawing, B (0.1%/1000 Hrs), 500
mOhms, 6032, Height Max = 2.8mm
General Information
Supplier:
Series:
Dielectric:
Style:
Description:
RoHS:
Prop 65:
REACH:
KEMET
T493_DLA
MnO2 Tantalum
SMD Chip
SMD, MnO2, Molded, DLA
Drawing
No
WARNING:
Cancer
and reproductive harm -
www.p65warnings.ca.gov.
SVHC (Pb – CAS 7439-92-1)
Solder Coated
Dimensions
Footprint
L
W
H
S
F
6032
6mm +/-0.3mm
3.2mm +/-0.3mm
2.5mm +/-0.3mm
1.3mm +/-0.3mm
2.2mm +/-0.1mm
Termination:
Specifications
Capacitance:
Capacitance Tolerance:
Voltage DC:
Temperature Range:
Rated Temperature:
10 uF
10%
25 VDC (85C), 16.75 VDC
(125C)
-55/+125C
85C
6.00% 120Hz 25C
B (0.1%/1000 Hrs)
0.5 Ohms (100kHz 25C)
2.5 uA (5min 25C)
10 Cycles Surge Current Testing
At -55C And +85C Before
Weibull
Packaging Specifications
Weight:
Packaging:
Packaging Quantity:
224.2 mg
T&R, 178mm
500
Dissipation Factor:
Failure Rate:
Resistance:
Leakage Current:
Testing and Reliability:
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and
we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the
requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us
with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Generated 9/30/2018 - fed060e0-316d-441d-ba67-00cc2929220b
© 2006 - 2018 KEMET
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
