The optional microcontroller board and graphical user interface (GUI)
software allow control of the driver board through a personal computer. This
gives access to the internal features of the MSL3162, including fault detection,
digital control of LED current, individual LED string on/off control, and internally
generated PWM dimming.
The compact eight-channel LED driver board is intended for evaluation,
prototyping, or small production runs. Gerber files and Cadence OrCAD layout
files are available to allow the circuit to be integrated into a larger system for
large production runs.
General Description
The Atmel
®
compact,
8-channel LED driver board
is a complete LED backlight
driver solution using the Atmel
LED Driver-MSL3162 for
medium-sized LCD panels.
Each channel drives up to 10
series-connected LEDs at up
to 160mA per channel. The
driver board is configured to
operate from a 10 - 16V input
voltage. The full-scale LED
current is preset to 50, 60,
70, or 80mA per LED string,
selected by an onboard switch.
Current can be reduced from
full scale through the I
2
C serial
interface in 64 linear steps.
Digital (PWM) dimming is
available through an external
signal or by using the internal
PWM generator via the
serial interface.
Applications
•
LCD Panel LED Backlight Driver
Ordering Information
PART
MSLB9082
DESCRIPTION
Compact, 8-channel LED driver module
2
Atmel LED Driver-MSLB9082
Atmel LED Driver-MSLB9082
LED Backlight Driver Module
Compact, 8-channel, 20W LED Driver Board with I
2
C Interface
Key Features
•
Drives Up to 8LED Strings
•
Up to 10 LEDs per String
•
Up to 160mA per LED string
•
Internally Generated PWM Dimming
•
I²C Serial Interface
•
Fault Detection and Protection
•
10 To 16V Input Voltage Range
•
Up To 20W Output Power
•
Small Size, 1.0” X 2.0”
•
Four Available I²C Slave Addresses, Switch Selectable
•
Four Full-scale Current Settings, Switch Selectable
•
Four Available Voltage Ranges To Support Multiple
Panels
•
1.4mhz Switching Frequency
•
Internal or External PWM Dimming Control
•
Digital Control Of LED String Current
•
Individual LED String On/Off Digital Control
•
Short Circuit Or Open Circuit LED String Detection
•
Automatic Over-voltage Protection
LED Driver Board
1.0”
(25.4mm)
2.0”
(50.8mm)
Atmel LED Driver-MSLB9082
3
Mechanical Drawing
Figure 1. Atmel LED Driver-MSLB9082 Mechanical Drawing. All Dimensions in Inches.
Connector Pin Descriptions
Table 1. J2 Input Connector Pin Descriptions
PIN NAME
PWR
NC
NC
NC
SDA
SCL
FLTB
EN
PWM
GND
PIN NUMBER
1,2
3
4
5
6
7
8
9
10
11,12
No connection
No connection
No connection
I²C serial data
I²C serial clock
Active low fault indication output
Enable control input
PWM dimming control input
Ground
PIN DESCRIPTION
Input power to integrated boost regulator circuit
Table 2. J3 Output Connector Pin Description
s
4
Atmel LED Driver-MSLB9082
Atmel LED Driver-MSLB9082
LED Backlight Driver Module
Compact, 8-channel, 20W LED Driver Board with I
2
C Interface
PIN NAME
VLED
STRA
STRB
STRC
STRD
STRE
STRF
STRG
STRH
GND
PIN NUMBER
1-8
9
10
11
12
13
14
15
16
17-20
LED string anode output voltage
LED string A cathode connection (MSL3162 STR0 and STR1)
LED string B cathode connection (MSL3162 STR2 and STR3)
LED string C cathode connection (MSL3162 STR4 and STR5)
LED string D cathode connection (MSL3162 STR6 and STR7)
LED string E cathode connection (MSL3162 STR8 and STR9)
LED string F cathode connection (MSL3162 STR10 and STR11)
LED string G cathode connection (MSL3162 STR12 and STR13)
LED string H cathode connection (MSL3162 STR14 and STR15)
Ground
PIN DESCRIPTION
Absolute Maximum Ratings
Voltage (With Respect to GND)
STR1-STR6 ............................................................................................................................................................................................. -0.3V to +40V
VLED ............................................................................................................................................................................................................. -0.3V to +40V
PWR .............................................................................................................................................................................................................. -0.3V to +25V
EN, PWM, SDA, SCL, FLTB .......................................................................................................................................................-0.3V to +5.5V
Ambient operating temperature range T
A
= T
MIN
to T
MAX
.................................................................................... -40°C to +50°C
The actual registers of MSP430G2232 are completely different from the descriptions in the user manual of the series "MSP430x2xx Family User's Guide" (slau144j.pdf). There is no reference, which result...
/*Signal definitioninclock: clockcontrol: controls the type of waveform generated. When it is 00,01,10,11, it generates sine wave, square wave, triangle wave and sawtooth wave respectively; i: control...
I used the downloaded PB to make a NK.BIN, copied it to the CF card, and then inserted the CF card into PC104 to run, and I can enter the CE system normally. Question 1: When running the serial port t...
Asking for help: What are the differences between the single-channel and dual-channel configurations of CS552? I have already adjusted the single-channel configuration, but the dual-channel configurat...
First, add C:\ti\controlSUITE\device_support\f2833x\v133\DSP2833x_common\cmd\F28335.cmd. This file is the TI official configuration file for configuring the code to flash. Then refer to C:\ti\controlS...
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
1 Introduction
With the acceleration of the pace of urban modernization, society has higher requirements for urban road lighting and urban lighting projects. The state has clearly required tha...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
1. Introduction
With the gradual automation and modernization of industrial control systems, fieldbus control systems have received more and more attention and application. CAN bus is currentl...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
1. What is temperature?
Heat is a type of molecular motion. The hotter an object is, the faster its molecules move. Absolute zero is defined as the temperature at which all molecular motion ...[Details]
1 Introduction
The Third Steel Plant of Jigang Group is a key investment project of Jigang Group during the "15th Five-Year Plan". It has introduced first-class domestic and foreign advanced eq...[Details]
This week, Microsoft held its 2012 Microsoft Worldwide Partner Conference (WPC) in Toronto, Canada. At the conference, Microsoft showed its new products and services to partners around the world. A...[Details]
LED lamps and bulbs are now rapidly replacing incandescent, halogen and CFL (compact fluorescent lamp) light sources in many general lighting applications. Flyback DC/DC converters are the power su...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
