(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
50
X
26
X
127mm [1.97X1.02X5 inches] (W
X
H
X
D) /150g max (with chassis & cover : 300g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 16W, -2: 17.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
65
X
26
X
140mm [2.56
X
1.02
X
5.51 inches] (W
X
H
X
D) / 220g max (with chassis & cover : 400g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 33W, -2: 34.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
83
X
26
X
185mm [3.27
X
1.02
X
7.28 inches] (W
X
H
X
D) / 300g max (with chassis & cover : 550g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 61W, -2: 62.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
[b][font=Verdana]How to manage line loss is mainly reflected in the following four aspects. [/font][/b][font=Verdana] Actual line loss can be divided into two categories: theoretical line loss and man...
[b]The probability of humans finding an ideal partner is only one in 285,000[/b] Backus, an economics professor at the University of Warwick in the UK, calculated the probability of finding an ideal p...
Many circuits use capacitors between 10nF and 10uF, which are the most common patches in small circuits (probably ceramic dielectrics), but it is easier for me to get CBB/CL capacitors. CBB has good p...
Abstract: This paper introduces the composition and working principle of the taxi meter system, and briefly describes the design concept and implementation process of the digital system using a single...
On January 27, according to media reports, Microsoft recently released its second-generation self-developed artificial intelligence chip, Maia 200, aiming to reduce its reliance on Nvidia and drive...[Details]
Introduction: Design of automated test systems
Challenges
To ensure the quality and reliability of products delivered to customers, test managers and engineers use automated test system...[Details]
In the development of high-stability lasers, real-time monitoring of the working state of the laser is an issue that needs to be focused on. This system realizes the high-stability laser temperatur...[Details]
Adding "intelligence" to measurement systems is becoming more common as 8-bit microcontrollers are inexpensive, widely available, and can be programmed using today's common high-level languages, su...[Details]
0 Introduction
At present, the analysis of intra-pulse signals in pulse radar has always been a hot topic and difficulty in research. How to measure the intra-pulse carrier frequency more ...[Details]
Volkswagen's electronic throttle has taken our understanding of the traditional throttle a big step forward. However, while we admire Volkswagen's new technology, which is constantly being applied...[Details]
1. What is fading?
In terms of scope, fading can be roughly divided into three types: large area fading, small area fading and indoor fading. As shown in Figure 1, large area fading refers t...[Details]
At present, TPMS (tire pressure monitoring system) is mainly divided into two types, one is indirect type and the other is direct type. The direct TPMS system has been affected by its poor alarm ac...[Details]
The growing global interest in green power has added new variables to the design of power supplies and power adapters. Designers must not only traditionally consider the design specifications requi...[Details]
The relationship between time and frequency
There is no conceptual difficulty in understanding what happens when a steady-state DC signal is applied to a voltmeter. However, if the signal ...[Details]
introduction
Using wireless sensor networks to detect the amount of grain in a grain depot is a new technology. Due to the complexity of grain piles, a large number of unevenly distribut...[Details]
Most of the current maritime radars in my country are imported radars with a short effective detection range. They are unable to identify signals when the signal-to-noise ratio drops to 3 dB. Wit...[Details]
1 AD7674 and C8051060 Introduction
1.1 AD7674 Introduction
AD7674 is a high-precision 18-bit successive approximation (SAR) ADC with high sampling rate, high precision, low power ...[Details]
0 Introduction
With the development of embedded computer application technology, embedded technology has been widely used in all aspects of modern life. In terms of retail systems, retail ...[Details]
0 Introduction
With the rapid development of the national economy and the continuous improvement of people's living standards, on the one hand, the traditional manual meter reading and bil...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
