1. at full load, 100 ~ 240 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with a 10 µF aluminum electrolytic and 0.1 µF ceramic capacitors.
PART NUMBER KEY
EMMA120110
X
-
XX
-
IC
-
CXX
Base Number
Reserved for Custom
Configurations
example of 12 Vdc, 1.1 A
DC Plug Type:
See output plug options
on page 3 for more details
Factory
Designation
Blades:
“blank” = North American, European, United Kingdom,
Australian
N = North American blade included
E = European blade included
B = United Kingdom blade included
A = Australian blade included
K = No blades included
cui.com
For more information, please visit the
product page
|
For information on related products, view
Dc Power Jacks
CUI Inc
│
SERIES:
EMMA 15W
│
DESCRIPTION:
MEDICAL AC-DC POWER SUPPLY
date
06/20/2017│
page
2 of 4
INPUT
parameter
voltage
frequency
inrush current
no load power consumption
at 240 V ac
conditions/description
min
90
47
typ
max
264
63
50
0.3
units
Vac
Hz
A
W
OUTPUT
parameter
line regulation
1
load regulation
2
voltage accuracy
hold-up time
switching frequency
temperature coefficient
Note:
1. measured from 100 ~ 240 Vac, full load
2. measured from 60% to full load and from 60 ~ 20% load (60% ±40% load)
conditions/description
5 Vdc output
all other outputs
5 Vdc output
all other outputs
at 115 Vac
min
typ
±1
±4
±2
±3
±2
10
95
±0.05
max
units
%
%
%
%
%
ms
kHz
%/°C
PROTECTIONS
parameter
over voltage protection
short circuit protection
conditions/description
TVS component to clamp
continuous, auto restart
SAFETY & COMPLIANCE
parameter
isolation voltage
safety approvals
EMI/EMC
leakage current
MTBF
RoHS
as per MIL-HDBK-217F, 115 Vac, 25 °C
2011/65/EU
200,000
conditions/description
input to output
medical IEC 60601-1, EN 60601-1, UL 60601-1 4th edition
EN5 5011 Class B, FCC Part 15 Class B, EN 60601-1-2, EN 61000-3-(2,3)
0.1
mA
hours
min
typ
max
5,656
units
Vdc
ENVIRONMENTAL
parameter
operating temperature
storage temperature
humidity
non-condensing
conditions/description
min
0
-20
typ
max
50
85
93
units
°C
°C
%
cui.com
For more information, please visit the
product page
|
For information on related products, view
Dc Power Jacks
CUI Inc
│
SERIES:
EMMA 15W
│
DESCRIPTION:
MEDICAL AC-DC POWER SUPPLY
date
06/20/2017│
page
3 of 4
MECHANICAL
parameter
dimensions
ø3.5 +0/-0.1
conditions/description
80.60 x 47.90 x 43.30 (3.173 x 1.886 x 1.705 inch)
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
techsupport@cui.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
Here, I wrote a DOS program in C to read super IO from smbus. It can read and write SIO and Hw monitor data of slave address 5A and 5E. Now I want to read and write memory A0~A6, but the output is 00....
I'm using STR712 and CC2420 to develop Zibee recently. I've encountered some problems using BSPI communication, so I'd like to ask you for advice. The Philips SPI I used before has a readable flag for...
I use keilC to compile, and the commands used to communicate with E2 are all copied with slight modifications. Currently, there is only one error that cannot be solved. I searched for a long time but ...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Today, with energy becoming increasingly scarce, the utilization of natural energy has become the focus of people's attention. Among various natural energies, the endless solar energy is highly fav...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
1 Introduction to LED
With the development of science and technology, people have higher and higher requirements on automobile light sources. LED (Light Emitting Diode) has gradually attracted...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
1 Overview
In the field of traditional lighting, the concepts and definitions of lamps and lamps are clear. Lamps and lamps have their own applicable product standards, supporting technical st...[Details]
Mobile phones, MP3s, tablet computers, laptops, digital cameras, handheld game consoles, navigation devices, etc., all these mobile devices are powered by mobile batteries, and the battery life is ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
