V FPGAs include innovations such as an enhanced core architecture, integrated
transceivers up to 28.05 gigabits per second (Gbps), and a unique array of integrated hard intellectual
property (IP) blocks.
With these innovations, Stratix V FPGAs deliver a new class of application-targeted devices optimized for:
• Bandwidth-centric applications and protocols, including PCI Express
®
(PCIe
®
) Gen3
• Data-intensive applications for 40G/100G and beyond
• High-performance, high-precision digital signal processing (DSP) applications
Stratix V devices are available in four variants (GT, GX, GS, and E), each targeted for a different set of
applications. For higher volume production, you can prototype with Stratix V FPGAs and use the low-
risk, low-cost path to HardCopy
®
V ASICs.
Related Information
Stratix V Device Handbook: Known Issues
Lists the planned updates to the
Stratix V Device Handbook
chapters.
Stratix V Family Variants
The Stratix V device family contains the GT, GX, GS, and E variants.
Stratix V GT
devices, with both 28.05-Gbps and 12.5-Gbps transceivers, are optimized for applications
that require ultra-high bandwidth and performance in areas such as 40G/100G/400G optical communica‐
tions systems and optical test systems. 28.05-Gbps and 12.5-Gbps transceivers are also known as GT and
GX channels, respectively.
Stratix V GX
devices offer up to 66 integrated transceivers with 14.1-Gbps data rate capability. These
transceivers also support backplane and optical interface applications. These devices are optimized for
high-performance, high-bandwidth applications such as 40G/100G optical transport, packet processing,
and traffic management found in wireline, military communications, and network test equipment
markets.
Stratix V GS
devices have an abundance of variable precision DSP blocks, supporting up to 3,926 18x18
or 1,963 27x27 multipliers. In addition, Stratix V GS devices offer integrated transceivers with 14.1-Gbps
data rate capability. These transceivers also support backplane and optical interface applications. These
devices are optimized for transceiver-based DSP-centric applications found in wireline, military,
broadcast, and high-performance computing markets.
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html.
Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
FPGA software part of the intermediate frequency design of DUC design of PFIR design This scheme requires the design of a 72-order 3-fold interpolation programmable FIR filter (i.e. PFIR), with an inp...
I want to use 430 to measure the number of pulses of an external input pulse in 1 second. I use Timer_A to set the timer for 1 second, and then define the input pin as capture mode. Every time a pulse...
I often see posts about 0 detection, but I don't know what function they want to achieve. Some even cite foreign papers, which are very complicated and difficult to understand. I simulated the attache...
[size=10.5pt][font=宋体][size=10.5pt]Calculate the output voltage as shown below[/size][/font][size=10.5pt]Vout[/size][/size] [[i] This post was last edited by june33 on 2009-10-17 15:07[/i]]...
Flip-chip and ball grid array (BGA) are two widely used packaging technologies in the electronics industry. Each has its own advantages and limitations, and in some cases, they can complement each ...[Details]
In mobile technology, sensors are the primary input for measured signals and form a component of a sensor system. They include sensitive and transducer elements connected to carriers and circuits. ...[Details]
Logic analyzers are widely used tools in digital design verification and debugging. They can verify the proper functioning of digital circuits and help users identify and troubleshoot faults. They ...[Details]
According to foreign media reports, BMW has just been granted a patent for a screen that could cover the entire roof. BMW hopes to transform at least a portion of the vehicle's headliner into a dis...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
Electric vehicles' 12V batteries don't rely on a generator to power them. Only gasoline-powered vehicles rely on the engine to drive a generator to generate electricity while driving, which is used...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
Chinese characters are extensive and profound, and there are many different names for ESD tubes. How many of them do you know?
As far as I know, ESD diodes are currently known as ESD p...[Details]
Linear motor modules have become the "sweet spot" in various fields due to their advantages such as long stroke, fast speed, high precision, smooth operation and long life. Different models of line...[Details]
On August 22, the Wall Street Journal reported on the 21st local time that the new US government does not plan to acquire equity in semiconductor wafer foundry giant TSMC and Micron, one of the thr...[Details]
According to Nikkei, a survey found that global electric vehicle battery supply is expected to reach more than three times the required quantity due to
cooling
demand for electric vehicles,...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Tiantai Robot's official Weibo account announced on the evening of August 20 that Tiantai Robot Co., Ltd., together with strategic partners including Shandong Future Robot Technology Co., Ltd., Sha...[Details]
MQTT Ethernet I/O modules primarily collect I/O port information and transmit data over the network. In addition to being a TCP server, Ethernet I/O modules can also function as TCP clients. Furthe...[Details]