Specifications are subject to change without notice.
Revised: 02/06/18
Radial Lead Fuses
TE5
®
> Fast Acting 450V Fuse > 808 Series
Product Characteristics
Materials
Base/Cap: Black Thermoplastic
Polyphenylene Sulfide, UL 94 V-0
Round Pins: Copper, Sn-plated
Body: Brand Logo, Current Rating
Rated Voltage,
Characteristic “F”
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
50 cycles, 15 minutes at –65°C/15
minutes at 125°C (MIL
-STD-202,
Method 107)
Operating
Temperature
Moisture
Resistance
-65ºC to +125ºC (Consider re-rating)
10 cycles, 65°C at 90-98% R.H. over
150 minutes, 180 minutes holding time,
Reduce temperature to 23 – 35°C over
150 minutes, 8 hours holding time
24 cycles at 5 min. each (IEC60068-2-6)
10-60Hz at 0.75mm amplitude
60-2000Hz at 10G’s acceleration
Product Marking
Solderability
Thermal Shock
Vibration
Resistance
Dimensions
8.9
max. 8.9
4.65
Part Numbering System
808 xxxx 0000
Series
Amp Code
L
Ø 0.6
0.5 min
4.0±1.0
4.0±0.5
0.6
Refer to Amp Code column of
Electrical Characteristics Table
1 +0.1
1 +0.1
Packaging Code
0000 Tape/Ammopack (1,000 pcs)
0440 Short leads - Bulk (1,000 pcs)
0075 7
.5mm pitch - Bulk (1,000 pcs)
5.08
7.5±0.3
Holes in PCB
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
7
.5mm Pitch
Packaging
Packaging Option
808 Series
Tape & Ammopack
Short Leads
7.5 mm Pitch
Packaging Specification
N/A
N/A
N/A
Quantity
1,000
1,000
1,000
Quantity &
Packaging Code
0000
0440
0075
Taping Width
N/A
N/A
N/A
Disclaimer Notice
-
Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each
product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at:
In the submersible system, it is actually a DSP development program. I have written a bootload program. I believe that many friends who have come into contact with the submersible system know the prin...
When reading the manual, I noticed something very interesting. The operating voltage of the MCU is 3.6V-1.8VBut if you look closely, the RAM retention voltage is only 1.6V.Then there may be a situatio...
Basic requirements: Heart rate measurement: heart rate sensor to measure heart rate Photographing: when emotions reach a certain value, start to shoot a 15s short video Upload information: upload a 15...
[i=s]This post was last edited by se7ens on 2021-5-19 17:02[/i]This is a boost circuit on a TV high frequency head.
Right input voltage 3.6v
After the transformer and switch 8050, it is converted into...