3M
™
Eurosocket
Type C (Rows A & C or A, B & C Filled)
•
•
•
•
•
62CXX Series
DIN 41612 compatible
High density (64 & 96 position)
Mates with DIN 41612 Type C headers
High reliability contact design
Can be daisy-chained or end terminated to flat
cable
• Optional strain relief with handle
• Individual connector coding with 3435-1
keying plug
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: October 30, 2007
TS-0813-B
Sheet 1 of 4
Physical
Insulation
Material:
Glass Filled Polyester (PBT)
Flammability:
Color:
Contact
Material:
Plating:
Underplating:
Wiping Area:
Wire Accommodation:
UL 94V-0
Gray
Copper Alloy
50
μ″
[ 1.27
μm
] Nickel
10
μ″
[ 0.25
μm
] Gold
2 row version (A, C): Stranded or Solid: 26 & 28 AWG; Solid: 30 AWG
3 row version (A, B, C): Stranded or Solid: 30 AWG
Marking:
3M Logo, Part Identification, and Contact Position Numbers
Electrical
Current Rating:
1 A
Insulation Resistance:
> 1
×
10
9
Ω
at 500 V
DC
Withstanding Voltage:
1000 V
RMS
at Sea Level
Environmental
Temperature Rating:
-55°C to +125°C
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Eurosocket
Type C (Rows A & C or A, B & C Filled)
86.10
[ 3.390 ]
62CXX Series
6.80
[ .268 ]
Material: Steel
86.4
[ 3.40 ]
10.60
[ .417 ]
10.95
[ .431 ]
1.27 Ref
[ .050 ]
Non-Conductive Transfer
Adhesive with Liner
1.27 Ref
[ .050 ]
11.60
[ .457 ]
Optional Mounting Flange
(See Order Information)
9.50
[ .374 ]
9.54
[ .376 ]
6.75
[ .266 ]
8.51
[ .335 ]
Position 32
Without Mounting
Flange
10.60
[ .417 ]
1.00
[ .039 ]
C1
B1
85.00
[ 3.346 ]
90.0
[ 3.54 ]
5.08
[ .200 ]
Ref
A1
2.54 [ .100 ] Ref
Break Off Tab
With Mounting
Flange
5.0
[ .20 ]
8.51
[ .335 ]
Keying Tab (4)
3435-1000
Keying Plug
(Optional: Order Separately)
Note:
1. Position B1 & C1 is terminated to the first conductor of the ribbon cable.
.0
mm
mm
[Inch]
Tolerance Unless Noted
.00
.000
± .3 ± .13
[ ] Dimensions for
Reference only
Ordering Information
Socket
62C64-1X0XXX
Row of Contacts:
1 = A and C
Mounting Flange Style:
0 = without
1 = with
Strain Relief
(Order Separately)
3448-6201
(RIA E1 & C1 apply)
Optional Plating:
EC = 30 µ" [0.76µm] Au over 50 µ"-150 µ"
[1.27 µm-3.80 µm] Ni (RIA E1 & C1 apply)
For-1X00XX
(no mtg flange)
version only
Assembly tools: 3M™ Press 3640 (or equivalent), 3M™ Locator Plate, 3443-117, 3M™ Platen 3442-9
TS-0813-B
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Eurosocket
Type C (Rows A & C or A, B & C Filled)
86.10
[ 3.390 ]
62CXX Series
6.80
[ .268 ]
Material: Steel
86.4
[ 3.40 ]
10.60
[ .417 ]
10.95
[ .431 ]
.847 Ref
[ .033 ]
.847 Ref
[ .033 ]
11.60
[ .457 ]
6.75
[ .266 ]
Without Mounting
Flange
Position 32
10.60
[ .417 ]
Non-Conductive Transfer
Adhesive with Liner
Optional Mounting Flange
(See Order Information)
9.50
[ .374 ]
9.54
[ .376 ]
1.00
[ .039 ]
85.00
[ 3.346 ]
90.0
[ 3.54 ]
8.51
[ .335 ]
C1
5.08
[ .200 ]
Ref
A1
8.51
[ .335 ]
2.54 [ .100 ] Ref
Break Off Tab
With Mounting
Flange
5.0
[ .20 ]
mm
[Inch]
Tolerance Unless Noted
.0
mm
.00
.000
Keying Tab (4)
3435-1000
Keying Plug
(Optional: Order Separately)
Note:
1. Position C1 is terminated to the first conductor of the ribbon cable.
± .3 ± .13
[ ] Dimensions for
Reference only
Ordering Information
Socket
62C96-120XXX
Mounting Style:
0 = without Mounting Flange
1 = with Mounting Flange
Strain Relief
(Order Separately)
3448-6201
(RIA E1 & C1 apply)
Optional Plating:
EC = 30µ" [0.76µm] Au over 50µ"-150µ"
[1.27µm-3.80µm] Ni (RIA E1 & C1 apply)
For-1200XX
(no mtg flange)
version only
Assembly tools: 3M™ Press 3640 (or equivalent), 3M™ Locator Plate 3443-117, 3M™ Platen 3442-9
TS-0813-B
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
京公网安备 11010802033920号
EEWORLD
