Independence Dimmer System 2.0
Wireless Single & Dual-Paddle Switches
Inspired LED’s new
2-Zone Independence Dimmer
System
combines the convenience of a plug-in power
supply with the finished look of a hardwired system
into one remarkable product. This unique product
incorporates a radio frequency receiver module and a
wireless energy-harvesting wall switch to control a
variety of different lighting zones.
Product Features:
SKU# 3884, 3885 (For use with SKU# 3882, 3883)
Optional Surface Mount Plate
Compatible with Independence Dimmer 2.0 receivers
(sold separately)
Wireless, energy harvesting technology (no batteries!)
Easy to sync with multiple receivers for versatile
system design and zoned control
Smart memory function retains most recent settings
Specifications:
Compatible with 12V or 24V DC plug-in power supplies
(not compatible with hardwire transformers)
Remote range up to 30 meters (16ft during pairing)
Available in 4 colors (white, light almond, ivory, black)
Includes optional surface mounting plate
Faceplate not included (fits standard 2.75” x 4.5” plates)
Instructions:
Set-Up
Zone 1 LEDs
Zone 2 LEDs
OR
Pairing Switches & Receivers (Cont’d)-
5. Repeat steps 3-5 to program additional switches to ZONE 1.
6. Next, connect cable from second set of LEDs to receiver
input marked “ZONE 2”. Set receiver to learning mode by
pressing the “PROGRAM 2” button once.
7. Connected lights will dim and brighten to indicate active
learning mode. Press desired switch up once to pair.
To Use Switch-
1. Click On: If LEDs are currently off, they will return to the
most recent brightness level. If already on, LEDs will increase
to maximum brightness.
2. Click Off: If LEDs are currently on, they will quickly fade off.
3. Hold Up: LEDs will increase to maximum brightness.
4. Hold Down: LEDs will fade to minimum brightness.
To Clear Programming-
1. Ensure power supply is plugged in and all LEDs are
connected to the receiver.
2. Press and hold the “PROGRAM” button which corresponds
to the zone you’d like to clear.
3. After 5 seconds, connected LEDs will turn off to indicate
successful clearing of switches.
Outlet
Power
Supply
Receiver
Module
Wireless
Single
Switch
Wireless
Dual
Switch
Pairing Switches & Receivers-
1. Plug in power supply and connect directly to receiver input
marked “POWER IN”.
2. Connect cable from first set of LEDs to receiver input “ZONE 1”.
3. Set receiver to learning mode by pressing the small
“PROGRAM 1” button once.
4. Connected lights will dim and brighten to indicate active
learning mode. Press the desired wireless switch up once to
pair, LEDs will hold full brightness when successfully paired
(must be within 16ft of receiver for programming).
inspiredled.com
orders@inspiredled.com
(480) 941-4286
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
