IMS-2SWWD-30
Vishay Dale
Inductors, Commercial, Subminiature, Molded, Shielded, Axial
Leaded
FEATURES
• Classification is grade 1, class A
ELECTRICAL SPECIFICATIONS
Inductance Tolerance:
± 10 % on Q-meter at specified
frequency
Dielectric Strength:
700 V
RMS
at sea level
Operating Temperature:
- 55 °C to + 105 °C
Self-Resonant Frequency:
Measured per MIL-PRF-15305
Q:
Measured on a Q-meter at specified frequency
Rating:
Maximum based on
1
/
3
W dissipation
• Ultra-reliable molded shielded inductor
• Inductance range is 0.10 μH to 10 000 μH
• 0.136" [3.45 mm] diameter by 0.335" [8.51 mm]
length
• Molded epoxy envelope
• Subminiature size for high density circuits and high
inductance-to-size ratio
• Utmost reliability, electrical performance and minimum
coupling in high density packaging
• Compliant to RoHS directive 2002/95/EC
MECHANICAL SPECIFICATIONS
Terminal Strength:
Meets 5 lb pull test, three 360° rotations
in alternate directions per MIL-PRF-15305 (latest revision)
ENVIRONMENTAL SPECIFICATIONS
Moisture:
Meets requirements of MIL-PRF-15305
Vibration:
High frequency, 10 Hz to 2000 Hz at 20 g ± 10 %
maximum for 12 logarythmic swings each of 20 min duration
repeated for each of three mutually perpendicular planes
Shock:
100
g,
6 ms
DENSITY SPECIFICATIONS
Weight:
0.50 g maximum
Shielding:
Less than 3 % coupling with two units mounted
side by side at 1000 cycles
DIMENSIONS
in inches [millimeters]
1.438 ± 0.188
[36.52 ± 4.78]
#24 0.020 ± 0.002
[0.508 ± 0.051]
TCW
0.335 ± 0.010
[8.51 ± 0.254]
0.145 [3.68]
Max.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IMS-2SWWD-30
IND.
(μH)
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
TOL.
(%)
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
Q
MIN.
42
42
42
42
42
42
42
42
41
39
36
35
TEST FREQUENCY
(MHz)
25
25
25
25
25
25
25
25
25
25
25
25
SRF MIN.
(MHz)
480
460
400
360
340
320
295
275
250
238
224
205
DCR MAX.
(Ω)
0.087
0.090
0.098
0.117
0.141
0.157
0.178
0.208
0.257
0.283
0.337
0.470
RATED DC
CURRENT
(mA)
1038
1021
978
895
815
773
726
671
604
576
527
447
INCREMENTAL
CURRENT
(mA)
(1)
> 1650
> 1630
> 1550
> 1420
> 1230
> 1140
> 1060
> 960
> 915
> 840
> 720
PHENOLIC
> 1330
Note
(1)
Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value
Document Number: 34046
Revision: 15-Jul-09
For technical questions, contact:
magnetics@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
MCU
京公网安备 11010802033920号
EEWORLD
