Characteristics:
• ESD Brushes are ideal for removing dust, dirt and left
over materials from printed circuit boards (PCB) and
other static sensitive components
• Brushes minimize static charge generation and
remove electrostatic charges to ground when held by
grounded personnel
• RTT Resistance: 1 x 103 to <1 x 105 ohms tested per
modified ANSI/ESD S4.1
• Firm bristles are mainly for electronics, especially
circuit boards
• Bristles are a mix of conductive synthetic yarn and
horse hair
Item
36089
Handle
Material
Aluminum
Bristle
Hardness
Firm
Overall
Length
4-3/4” (121 mm)
Overall
Width
1/8" (3 mm)
Bristle
Length
1/2” (14 mm)
Bristle
Width
1/4” (6 mm)
Bristle
Height
3/16” (5 mm)
1/8’’
4-3/4”
89
Designed to fulfill ANSI/ESD S20.20 requirement to ground all
conductors at ESD workstation.
ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity
Sources “Brushes (camel/pig hair and synthetic bristles).”
“It should be understood that any object, item, material or person could
be a source of static electricity in the work environment. Removal of
unnecessary nonconductors, replacing nonconductive materials with
dissipative or conductive materials and grounding all conductors are
the principle methods of controlling static electricity in the workplace,
regardless of the activity.” (TR 20.20 section 2.4)
Unless otherwise noted, tolerance is ±10%.
Specifications and procedures subject to change without notice.
Made in Israel
CONDUCTIVE ROUND BRUSH WITH ALUMINIUM HANDLE, 1/8 IN
3651 WALNUT AVE., CHINO, CA 91710
PHONE: (909) 627-2453
WEBSITE:
MendaPump.com
DRAWING
NUMBER
36089
DATE:
July
2018
© 2018 DESCO INDUSTRIES INC
Employee Owned
Power technology
京公网安备 11010802033920号
EEWORLD
