3
PTFE Glass Cloth Tape
5451 • 5453
Technical Data
October, 2016
Product Description
Premium performance 3M™ PTFE Glass Cloth Tape 5451 and 5453 has a brown
woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). These
tapes provide a slick surface on process machinery and offers an extremely low
coefficient of friction which, in combination with a pressure sensitive silicone
adhesive, creates a non-stick surface that performs at elevated temperatures.
Backing
Woven glass cloth
impregnated with PTFE
(polytetrafluoroethylene)
Adhesive
Silicone
Color
Brown
Standard Roll Length
36 yds. (32.9 m)
Product Construction
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
ASTM Test Method
3M tape 5451
Adhesion to Steel:
Tensile Strength:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
3M tape 5453
Adhesion to Steel:
Tensile Strength:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
38 oz./in. width (41 N/100 mm)
100 lbs./in. width (1760 N/100 mm)
5.6 mils (0.14 mm)
3.2 mils (0.08 mm)
-100° to 500°F (-73° to 260°C)
D-3330
D-3759
D-3652
D-3652
55 oz./in. width (60 N/100 mm)
175 lbs./in. width (3065 N/100 mm)
6.0 mils (0.15 mm)
8.2 mils (0.21 mm)
-100° to 500°F (-73° to 260°C)
D-3330
D-3759
D-3652
D-3652
Features
•
Very low moisture absorption allows the tape to perform in many humid
environments.
Premium glass cloth reinforced backing provides greater tensile strength
and resistance to tears and punctures than typical PTFE film backed tapes.
Excellent chemical resistance enables tape to withstand challenging
applications.
CAUTION:
When PTFE film tape is exposed to temperatures above 600°F
(316°C), small quantities of hazardous vapors may be released. INHALATION
OF THESE VAPORS MAY BE HARMFUL OR MAY CAUSE RESPIRATORY
TRACT IRRITATION. Do not heat or expose PTFE film tape to temperatures
above 600°F (316°C).
3M
™
PTFE Glass Cloth Tape
5451 • 5453
Application Ideas
•
•
•
•
Easy-release, low friction surface on heat sealing and packaging equipment.
Mold release surface in composite bonding.
Lining conveying chutes, troughs and ducts.
Covering rollers, drums, turnbars and formers on stitchers, binders and other
process machinery.
• High temperature bundling.
• Barrier for the separation of dissimilar parts.
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.
Storage
Shelf Life
To obtain best performance, use this product within 24 months from date of
manufacture.
Technical Information
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO 9001
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/iatd
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2016 (10/16)
京公网安备 11010802033920号
EEWORLD
