Standard Resistance Range - Linear .................................................................................................................................................. 1 K ohms to 1 megohm
Total Resistance Tolerance - Linear Tapers .................................................................................................................................................................... ±20 %
End Resistance ..............................................................................................................................................2 % or 2 ohms maximum (whichever is greater)
Power Rating @ 70 °C (Derate to 0 at 125 °C - Voltage Limited By Power Dissipation or 200 VAC, Whichever is Less) ...................................... 0.25 watts
Operating Temperature Range .......................................................................................................................................-40 °C to +125 °C (-40 °F to +257 °F)
Storage Temperature Range .........................................................................................................................................-55 °C to +125 °C (-67 °F to +257 °F)
Temperature Coefficient Over Storage Temperature Range ............................................................................................................................ ±1,000 ppm/°C
Vibration ............................................................................................................................................................................................................................ 30 G
Total Resistance Shift .................................................................................................................................................................................±1 % maximum
Voltage Ratio Shift ......................................................................................................................................................................................±1 % maximum
Shock .............................................................................................................................................................................................................................. 100 G
Total Resistance Shift .................................................................................................................................................................................±1 % maximum
Voltage Ratio Shift ......................................................................................................................................................................................±1 % maximum
Total Resistance Shift .......................................................................................................................................................................±10 % TRS maximum
Rotational Life (No Load) ..................................................................................................................................................................................... 50,000 cycles
Total Resistance Shift .........................................................................................................................................................................±5 % TRS maximum
Contact Resistance Variation .................................................................................................................................. 3 % or 3 ohms (whichever is greater)
Moisture Resistance .................................................................................................................................................. MIL-STD-202, Method 103, Condition B
Total Resistance Shift .......................................................................................................................................................................±10 % TRS maximum
IP Rating ............................................................................................................................................................................................................................. IP67
Manual Soldering ................................................ 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .........................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds
Wash Processes ....................................................... For recommended wash processes, please refer to http://www.bourns.com/pdfs/sldclen.pdf
Marking................................................................. Manufacturer’s trademark, model number, product code, terminal style, resistance code and date code
Ganging ..........................................................................................................................................................................................................2 cups maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
Flammability ........................................................................................................................................................................................... Conforms to UL94V-0
Epoxy .................................................................................................................................................................................................... Conforms to UL 94V-1
IP Rating ............................................................................................................................................................................................................................. IP67
Switch Characteristics
Switch Life ................................................................................................................................................................................................................10K cycles
Detent Torque ...................................................................................................................................................................................................... 0.5 oz-in min.
Power Rating (Resistive Load) .....................................................................................................................................................................100 mA @ 16 VDC
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Additional Features
n
Audio taper versions available as special order
n
RoHS compliant*
3310 - 9 mm Square Sealed Panel Control
Standard Resistance Table
Resistance
(Ohms)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
How To Order
Model Number Designator
3310 = 9 mm Panel Control
Terminal Style Designator
Single Cup:
C = In-line Straight Terminals Side Exit 2.54 mm centers
R = In-line Terminals Rear Exit 2.54 mm centers
P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit
Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit
Dual Cup (Pot/Pot or Pot/Switch):
H = Dual In-line Straight Terminals Rear Exit 2.54 mm centers
Shaft End Designator
0 = Shaft End Slotted
1 = Shaft End Flatted
Shaft Length Designator
0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only)
1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only)
2 = 5.59 mm FMS Long Plastic Shaft (Bushingless version only)
Bushing Designator
Pot (or Pot/Pot):
1 = 6.35 mm x 6.35 mm Plastic
2 = 6.35 mm x 6.35 mm Ni Plated Brass
5 = Bushingless (Board Level Control)
Pot/Switch Bushing Designator (use with “H” terminal style only.)
3 = 6.35 mm x 6.35 mm Plastic
4 = 6.35 mm x 6.35 mm Ni Plated Brass
6 = Bushingless (Board Level)
Resistance Code
(1st 2 digits are significant, 3rd digit is number of 0s to follow)
RoHS Identifier
L = Compliant
3310 Y - 0 0 1 - 103 L
Popular values listed in boldface. Consult
factory for special resistances.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
3310 - 9 mm Square Sealed Panel Control
Product Dimensions
COMMON DIMENSIONS
3310-001
3310C-001
9.53 ± .25
(.375 ± .010)
3310Y-001
2
Plastic Bushing
Slotted Shaft
9.53 ± .25
(.375 ± .010)
3
9.53 ± .25
(.375 ± .010)
3.91 ± .38
(.154 ± .015)
2.54 ± .25
(.100 ± .010)
9.53 ± .25
1 (.375 ± .010)
.51 ± .05
DIA.
(.020 ± .002)
SOLDER PLATED
COPPER PINS
2.54 ± .25
(.100 ± .010)
3
5.97 ± .89
(.235 ± .035)
2.54 ± .25
(.100 ± .010)
2
1
2.54 ± .25
(.100 ± .010)
5.97 ± .89
(.235 ± .035)
3
2
1
3310P-001
2
9.53 ± .25
(.375 ± .010)
5.08 ± .25
(.200 ± .010)
1/4-32 UNEF-2A
THREADED PLASTIC
BUSHING
MOUNTING
SURFACE
.38
(.015)
MIN.
STANDOFF
3
4.75 MIN. FULL
(.187) THREAD
1 9.53 ± .25
(.375 ± .010)
2.54 ± .38
(.100 ± .015)
DIA.
3.18 ± .05
(.125 ± .002)
COMMON DIMENSIONS
2.54 ± .25
(.100 ± .010)
2.54 ± .25
(.100 ± .010)
3310C-101
Plastic Flatted Shaft
MOUNTING
SURFACE
2.39
(.094)
4.83 ± .25
(.190 ± .010)
5.18 ± .38
(.204 ± .015)
6.35
(.250)
12.70 ± .64
(.500 ± .025)
ADJUSTMENT SLOT
.64 ± .10
WIDE
(.025 ± .004)
X
.76 ± .25
DEEP
(.030 ± .010)
6.35 ± .08
(.250 ± .003)
MOUNTING
DIA.
2.54 ± .25
(.100 ± .010)
5.97 ± .89
(.235 ± .035)
4.83 ± .38
(.190 ± .015)
4.83
(.190)
2
12.70 ± .64
(.500 ± .025)
FROM MOUNTING
SURFACE
1
3310R-001
6.35 ± .08
(.250 ± .003)
MOUNTING DIA.
R
.76 ± .05 X .76
HIGH
(.030 ± .002 X .030)
ANTI-ROTATION
BOSS
3
7.62
(.300)
DIA. MOUNTING
SURFACE
.38
(.015)
MIN.
STANDOFF
4.78
(.188)
.51
4 PLACES
(.020)
2.54 ± .25
(.100 ± .010)
2.54 ± .25
(.100 ± .010)
5.97 ± .89
(.235 ± .035)
The shaft flat position as shown above is at 50 %
of the mechanical travel.
2.54 ± .25
(.100 ± .010)
6.53 ± 0.03
(.257 ± .001)
DIA.
MOUNTING HOLE PATTERN
4.78
(.188)
1.70 ± 0.03
(.067 ± .001)
DIA.
MM
DIMENSIONS:
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
3310 - 9 mm Square Sealed Panel Control
Product Dimensions
7.62 ± .20
DIA.
(.300 ± .008)
1/4-32 UNEF-2A
THREADED METAL
BUSHING
MOUNTING
SURFACE
6.35 ± .08
(.250 ± .003)
MOUNTING DIA.
6.35 ± .20
DIA.
(.250 ± .008)
.38
(.015)
MIN. STANDOFF
.38
(.015)
MIN. STANDOFF
4.83 ± .25
(.190 ± .009)
.76
(.030)
6.35
(.250)
.51 ± .10
(.020 ± .004)
5.18 ± .64
(.204 ± .025)
5.59 ± .38
(.220 ± .015)
6.35 ± .64
(.250 ± .025)
12.70 ± .64
(.500 ± .025)
R
.76 ± .05 X .97
HIGH
(.030 ± .002 X .038)
ANTI-ROTATION
BOSS
7.62
(.300)
DIA. MOUNTING
SURFACE
.38
(.015)
MIN.
STANDOFF
.38
(.015)
MIN. STANDOFF
.51
2 PLACES
(.020)
DIMENSIONS:
5.08 ± .51
(.200 ± .020)
MM
(INCHES)
B
C
A
NOTE: * Only recommended shaft length
for bushingless version
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
3310 - 9 mm Square Sealed Panel Control
Product Dimensions
COMMON DIMENSIONS
3310H-003
3310H-025*
Pot/Switch Dual Cup
Plastic Bushing
9.53 ± .25
(.375 ± .010)
3 2
1
PRIMARY
ELEMENT
Pot/Pot Dual Cup
Bushingless
3 2
1
PRIMARY
ELEMENT
Pot/Pot Dual Cup
Metal Bushing
3 2
1
PRIMARY
ELEMENT
3310H-002
9.75 ± .38
(.383 ± .015)
.38
(.015)
MIN.
STANDOFF
6 5
B C
A SWITCH
2.54 ± .25
(0.10 ± .010)
2.54 ± .25
(0.10 ± .010)
4
SECONDARY
ELEMENT
6 5
4
SECONDARY
ELEMENT
.48
(.019)
4 PLCS.
ANTI-ROTATION LUG
MOUNTING
SURFACE
1/4-32 UNEF-2A
THREADED
METAL BUSHING
3.18 ± .05
(.125 ± .002)
DIA.
.51 ± .05
DIA.
(.020 ± .002)
TIN PLATED
COPPER PINS
7.62
TYP.
(0.30)
5.08 ± .25
(0.20 ± .010)
MOUNTING
SURFACE
.38
(.015)
MIN.
STANDOFF
ANTI-ROTATION LUG
1/4-32 UNEF-2A
THREADED
PLASTIC BUSHING
3.18 ± .05
(.125 ± .002)
DIA.
.38
(.015)
MIN.
STANDOFF
7.62 ± .20
DIA.
(0.30 ± .008)
MOUNTING
SURFACE
.76
(.03)
5.97 ± .89
(.235 ± .035)
6.35
(0.25)
12.70 ± .64
(0.50 ± .025)
5.97 ± .89
(0.235 ± .035)
.36 ± .10
(0.14 ± .004)
5.59 ± .38
(0.220 ± .015)
7.62 ± .64
(0.29 ± .025)
ADJ. SLOT
6.35
(0.25)
1.14
TYP.
(0.045)
7.54 ± .64
(0.297 ± .025)
ADJ. SLOT
12.70 ± .64
(0.50 ± .025)
.64 ± .10
.76 ± .08
WIDE X
DEEP
(.025 ± .004)
(.03 ± .004)
6.35 ± .08
(0.25 ± .003)
MOUNTING DIA.
.69 ± .10
.76 ± .08
WIDE X
DEEP
(.027 ± .004)
(.03 ± .004)
6.35 ± .08
MOUNTING DIA.
(0.25 ± .003)
Pot/Pot Dual Cup
PRIMARY
CCW
1
CLOCKWISE
Pot/Switch Dual Cup
2
3
CW
PRIMARY
CCW
1
CLOCKWISE
2
3
CW
SECONDARY
CCW
4
CLOCKWISE
5
WIPER
6
CW
SWITCH
CCW
A
CLOCKWISE
C
COMMON
B
CW
MM
DIMENSIONS:
(INCHES)
Pot Single Cup
PRIMARY
2
3
CW
NOTE: * Only recommended shaft length
for bushingless version
CCW
1
CLOCKWISE
REV. 07/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
[i=s] This post was last edited by Erbai Ah Ah on 2016-6-7 22:08 [/i] Why is there a capacitor added to the 3.3v in the 1st part of the picture? Where is the vpp in the 2nd part? Is the 3.3v in the 3r...
I want to DIY a mobile power bank. The power management chip uses TP4222 as the charging and discharging chip. The circuit is built according to the typical circuit. After soldering the components, I ...
1. Confirmation of the board frame diagram (provided by the structural engineer). Design can only start after the board frame diagram is OK . After the PCB design is completed, the structure needs to ...
I use ea development kit lpc4088, with a S25FL032 SPIFI FLASH on board. I set up J-LINK download in KEIL, and there is a 407x/8x SPIFI. But the range is 0x28000000-0x28400000, but the manual and chip ...
When the WDP500-2A plane grating monochromator is used to test the emission wavelength of a high-power laser diode at different currents, the matching of the laser diode has the disadvantages of lo...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
Images in science fiction movies often break through the limits of reality, such as in the movie "Minority Report." Tom Cruise uses a multi-touch screen to browse information. Capacitive sensing te...[Details]
1. Background:
The instrument system parameter detection and control of the chemical production workshop of Tangshan Coal Gas Coking Plant are all analog instruments, some of which are eve...[Details]
Xiaomi, a well-known Internet phone in mainland China, won a million-unit order contract from China Unicom on November 20 last year, which made Xiaomi famous in mainland China. In April this year...[Details]
0 Introduction
With the rise and continuous improvement of the solid-state lighting industry, light-emitting diodes (LEDs) have become an alternative lighting technology and are gr...[Details]
The concept of state machine
State machine is an important concept in software programming. More important than this concept is its flexible application. In a clear and efficient program, ther...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
introduction
At present, measuring instruments are developing towards networking, and each individual embedded instrument will become a node on the Internet. This system realizes the network...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Microchip MCU
京公网安备 11010802033920号
EEWORLD
