Full NFC-Forum-
compliant functionality
for automotive
applications
NXP
®
NCx3340 Automotive-Qualified NFC
Controller with NCI Interface
Equipped with embedded firmware, the compact, fully NFC Forum compliant NCx3340
controller enables easy integration of NFC functionality into embedded systems of a
car via the NCI interface.
KEY FEATURES
NCI over I²C and SPI host interface
NFCIP 1 and NFCIP 2 compliance
All NFC operating modes
– Read/Write Mode: ISO/IEC 14443 A&B up to 848 kbit/s,
FeliCa at 212 & 424 kbit/s, MIFARE® 1K, 4K, NFC Forum
type 1, 2, 3, 4, 5 tags, ISO/IEC 15693
– All peer-to-peer modes
– Card Emulation Mode (from host): NFC Forum T4T
(ISO/IEC 14443 A&B) at 106 kbit/s
Integrated ARM
®
Cortex
®
-M0 core
– Fully configurable polling loop with low power mode
– Active load modulation
– Pad supply voltage: 1.8 or 3.3 V
– RF driver: 2.7 to 5.5 V, 170 mA max
Integrated self-test to verify antenna circuit during
production
Very low power (<1 mW polling)
HVQFN40 package (6.0 x 6.0 x 0.85 mm)
Temperature range: NCF: -40°C – +85 °C; NCJ:-40°C – +105°C
Software drivers: Linux
®
, Android™, AUTOSAR NCI stack
and NXP NCI example
KEY BENEFITS
Fully automotive qualified
Full NFC Forum compliance
Integrated firmware with NCI interface
Fast time-to-market
Low bill of materials (BOM)
Easy development
Proven interoperability
Low power operation
APPLICATIONS
Bluetooth
®
/Wi-Fi
®
pairing
Driver authorization (e.g., engine start)
Personalization (air conditioning, seat features
and mirror settings)
Transmit vehicle diagnostics data
Payment services
NXP’s NCx3340 is an ideal solution for designers working in
automotive real-time operating system (RTOS) environments.
The NCx3340 comes with embedded NFC firmware and uses
the NFC Forum’s NCI interface to ease the NFC software
integration.
The embedded firmware reduces the BoM and enables a
smaller design because it lets the NCx3340 connect directly
to the host processor. The use of production-ready drivers
simplifies integration and reduces time-to-market, while
compliance with the NFC Forum ensures interoperability with
every NFC-enabled product on the market.
The small HVQFN40 package and low power operation make
the NCx3340 suitable for use in various automotive applications.
The integrated power management supports hard power down
mode and consumes less than 1 mW in the polling phase.
RF PROTOCOLS
The NCx3340 executes peer-to-peer mode in compliance with
the NFC Forum-defined standard NFCIP-1 and NFCIP-2. It
supports host-card emulation in accordance with ISO/IEC 14443
Type A/B, and supports all the relevant protocols for read/write
modes, including ISO/IEC 14443 Type A and B read/write up to
848 kbits/s, ISO/IEC 15693, FeliCA read/write up to 424 kbits/s,
read/write support for MIFARE cards, and all NFC Forum tag
types. The NCx3340 is also compatible with ISO/IEC 15693 to
complete the broad range of possible applications.
SUPPORT TOOLS
For a head start on design, the NCx3340 is available with
a demo kit that includes a NCx3340 demo board, LPC1769
LPCXpress host controller board, Windows
®
GUI, user guide,
application notes and a bunch of NFC tags. For requesting an
NCx3340 demo kit please contact
automotive_nfc@nxp.com.
SPECIFICATION
Carrier frequency [MHz]
Operating distance up to [mm]
RF transmitter supply voltage [V]
Transmitter supply current, max [mA]
Power-down mode current, typ [μA]
Low-power card detection mode [μA]
Temperature range [°C]
Package
* Depends on antenna, coil size, tuning, and environment
** Depends on the duty cycle
NCx3340
13.56
100*
2.7–5.5
170
10
200**
-40 to +85 and -40 to +105
HVQFN40 with wettable flanks
Power-down mode with RF level detector on [μA] 20
COMBINED NFC AND QI WIRELESS POWER CHARGING MODULE
www.nxp.com
NXP, the NXP logo and MIFARE are trademarks of NXP B.V. All other product or service names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM Limited
(or its subsidiaries) in the EU and/or elsewhere. © 2017 NXP B.V.
Document Number: AUTONCF3340LF REV 0
京公网安备 11010802033920号
EEWORLD
