EEWORLDEEWORLDEEWORLD

Part Number

Search

3M 9495MP 7" X 10.5"-25

Description
TAPE DBL COAT 7"X 10 1/2" 25/RL
Categoryaccessories   
File Size180KB,4 Pages
Manufacturer3M
Websitehttp://3M.com/esd
Environmental Compliance
Download Datasheet Parametric View All

3M 9495MP 7" X 10.5"-25 Overview

TAPE DBL COAT 7"X 10 1/2" 25/RL

3M 9495MP 7" X 10.5"-25 Parametric

Parameter NameAttribute value
Tape typeDouble coated, double sided
AdhesiveAcrylic, 200MP
base fabric, carrierPolyester film
thickness0.0057"(5.7 mils,0.145mm)
Thickness - Adhesive0.0029"(2.9 mils,0.074mm)
Thickness - base fabric, carrier0.0028"(2.8 mils,0.071mm)
width7.00"(177.80mm)
length10.50"(266.70mm)10 1/2"
colortransparent
use-
temperature range250°F (121°C) maximum
shelf life24 months
Shelf life start dateManufacturing date
Technical Data
November 2011
3M
Double Coated Tapes 9492MP
9495MP
9495MPF
9495B
Product Description
3M™ Double Coated Tapes with 3M™ Laminating Adhesive 200MP feature a thin polyester film for dimensional stability
and improved handling with ease of die-cutting and laminating. The 3M adhesive 200MP provides exceptional temperature
and chemical resistance. 3M™ Double Coated Tape 9495B has a black polyester film to provide opacity or visibility.
Construction
Product
Number
3M™ Double
Coated Tape
9492MP
3M™ Double
Coated Tape
9495MP
3M™ Double
Coated Tape
9495MPF
3M™ Double
Coated Tape
9495B
Note 1:
Note 2:
Note 3:
Note 4:
Faceside
1.4
Adhesive
Thickness
1.0 mil
(0.025mm)
2.9 mil
(0.074mm)
2.9 mil
(0.074mm)
2.9 mil
(0.074mm)
Carrier
Type/
Thickness
Clear PET
3
0.5 mil
(0.013mm)
Clear PET
0.5 mil
(0.013mm)
Clear PET
0.5 mil
(0.013mm)
Black PET
0.5 mil
(0.013mm)
Backside
2,
Adhesive
Thickness
1.0 mil
(0.025mm)
2.3 mil
(0.058mm)
2.3 mil
(0.058mm)
2.3 mil
(0.058mm)
Liner
Color, Type,
Print
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
Clear, PET,
No Print
Tan, 58#,
Polycoated Kraft,
“3M 200MP”
Liner
Caliper
4.0 mil
(0.10mm)
4.0 mil
(0.10mm)
2.0 mil
(0.051mm)
4.0 mil
(0.010mm)
Total Tape
Thickness
(w/o liner)
2.5 mil
(0.06mm)
5.7 mil
(0.14mm)
5.7 mil
(0.14mm)
5.7 mil
(0.14mm)
Faceside adhesive is on the interior of the roll, exposed when unwound.
Backside adhesive is on the exterior of the roll, exposed when liner is removed.
PET (Polyester).
The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.
Features
• A thin polyester carrier in the products provides dimensional stability and improved handling with ease of die-cutting and
lamination compared to adhesive transfer tapes.
• 3M™ Laminating Adhesive 200MP provides exceptional temperature and chemical resistance and withstands tough
application environments.
• 3M™ Double Coated Tape 9495MPF has a film liner for ease in rotary die-cutting and applications who demand low
particle generating parts.
Application Ideas
Graphic overlays
Nameplates
Appliques
Decorative Trim
Thermal and sound damping applications in the electronics and appliance industry.
Gasket and lens attachment for electronic assemblies.
3
KITL debugging problem - KDBG problem
Hello everyone: When I was debugging with kitl, after using PB's Attatch to download the system image normally, when sending the debugging message to PB, the startup stopped. DBGMSG and PPSH were regi...
xiaoyake1 Embedded System
PADS
The pins are all connected but I don't know what's going on....
forever1314 PCB Design
When the application on the wince platform is reading data on the SD card, the SD card is ejected. How to use the program to exit safely
The image browser is reading the data on the SD card, but the SD card is ejected at this time. The image browser is required not to freeze and return to the initial interface....
youngboy Embedded System
How to connect digital ground and analog ground?
The mainstream practice now is single-point connection (or through inductors, capacitors, magnetic beads, etc.), as shown in the figure , but I personally think that, taking the figure above as an exa...
caijianfa55 PCB Design
wince file save
How to create a txt file in wince like in windows and save it in flash....
gczywjk Embedded System
How to simulate and develop stm32l011 (Shenma tool?)
How to perform simulation debugging if IAR760's Jlink does not support stlink or other programming languages?...
topdreams stm32/stm8

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1580  1576  1531  46  1219  32  31  1  25  33 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号