Y16259K09000A0W datasheet, PDF

Datasheet> All Categories > Passive components> Y16259K09000A0W

Y16259K09000A0W: DescriptionVSMP1206 9K0900 TCR0.2 0.05% B W; CategoryPassive components; File Size838KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Y16259K09000A0W Overview

VSMP1206 9K0900 TCR0.2 0.05% B W

Y16259K09000A0W Parametric

Parameter Name	Attribute value
resistance	9.09 kOhms
Tolerance	±0.05%
Power (W)	0.3W
component	metal foil
characteristic	non-inductive
Temperature Coefficient	±0.2ppm/°C
Operating temperature	-55°C ~ 150°C
Package/casing	1206 (3216 metric)
Supplier device packaging	1206
size/dimensions	0.126" long x 0.062" wide (3.20mm x 1.57mm)
Height - Installation (maximum)	0.025"（0.64mm）
Number of terminals	2
failure rate	-

Preview

Download Datasheet

View All

VSMP Series(0603,0805,1206,1506,2010,2010,(ZFoil)

VSMP Series (0603, 0805, 1206, 1506, 2512) 2512)

(Z Foil)

Ultra High Precision Foil Wraparound Surface Mount Chip Resistor

with TCR of ±0.05 ppm/°C and Power Coefficient of 5 ppm at

Rated Power and Load Life Stability of ±0.005% (50 ppm)

FEATURES

• Temperature coefficient of resistance (TCR):

0.2 ppm/°C typical (–55°C to +125°C, +25°C ref.)

• Resistance tolerance: to ±0.01%

• Power coefficient “∆R due to self heating”:

5 ppm at rated power

• Power rating: to 750 mW at +70°C (see table 3)

• Load life stability: to ±0.005% at 70°C, 2000 h

at rated power

• Resistance range: 5 Ω to 125 kΩ (for lower or higher

values, please contact us)

• Bulk Metal Foil resistors are not restricted to standard

values, we can supply specific “as required” values at

no extra cost or delivery (e.g. 1K2345 vs. 1K)

• Thermal stabilization time <1 s (nominal value achieved

within 10 ppm of steady state value)

• Electrostatic discharge (ESD) at least to 25 kV

• Short time overload: ≤0.005%

• Non inductive, non capacitive design

• Rise time: 1 ns effectively no ringing

• Current noise: 0.010 μV

RMS

/V of applied voltage

(<–40 dB)

• Voltage coefficient <0.1 ppm/V

(resistance values above 10 kΩ)

• Non inductive: <0.08 μH

• Non hot spot design

• Terminal finishes available: lead (Pb)-free, tin/lead alloy

• Matched sets are available on request

• Screening in accordance with EEE-INST-002 and

MIL-PRF-55342 available (see datasheet resistor

models 303133 to 303138)

• Quick prototype quantities available, please contact

foil@vpgsensors.com

Top View

(for date code print specification please refer to table 2)

INTRODUCTION

VSMP Series is the industry’s first device to provide high

rated power and excellent load life stability along with

extremely low TCR – all in one resistor.

One of the most important parameters influencing stability

is the Temperature Coefficient of Resistance (TCR).

Although the TCR of Bulk Metal

Foil is considered

extremely low, this characteristic has been further

refined over the years. The VSMP Series utilizes ultra

high precision Z Foil. The Z Foil technology provides a

significant reduction of the resistive element’s sensitivity

to ambient temperature variations (TCR) and to self

heating when power is applied (Power Coefficient of

Resistance, or PCR). Along with the inherently low PCR

and TCR, Z Foil technology also provides remarkably

improved load life stability, low noise and tight tolerances.

Vishay Foil Resistors’ (VFR) application engineering

department is available to advise and make

recommendations. For non-standard technical

requirements and special applications, please contact

us using the e-mail address in the footer below.

Table 1—Tolerance and TCR vs. Resistance

Value

(1)

(–55°C to +125°C, +25°C Ref.)

Resistance value

250 Ω to 125 kΩ

100 Ω to <250 Ω

50 Ω to <100 Ω

25 Ω to <50 Ω

10 Ω to <25 Ω

5 Ω to <10 Ω

(1)

Figure 1—Power Derating Curve

Percent of Rated Power

100

- 75

Tolerance

±0.01%

±0.02%

±0.05%

±0.1%

±0.25%

±0.5%

Typical TCR and

max. Spread

±0.2 ±1.8 ppm/°C

±0.2 ±2.8 ppm/°C

±0.2 ±3.8 ppm/°C

±0.2 ±7.8 ppm/°C

- 55 °C

+ 70 °C

For tighter performances and non-standard values lower than

5 Ω and above 125 kΩ, please contact application engineering

using the e-mail addresses in the footer below

- 50

- 25

+ 25 + 50 + 75 + 100 + 125 + 150 + 175

Ambient Temperature (°C)

* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant.

For example, parts with lead (Pb) terminations are not RoHS compliant. Please see the information/tables in this datasheet for details.

Document No.: 63060

Revision: 25-Jul-2016

For any questions, contact

foil@vpgsensors.com

www.vishayfoilresistors.com

Recommended Resources

Infrared remote control transmitter (PT2262)

Audio power amplifier circuit using TDA8563Q chip

Y3150 gear hobbing machine control circuit

STK1060 power amplifier circuit diagram

LCD display digital voltmeter and ammeter circuit diagram 3

Wireless speed regulating transmitting and receiving circuit

FAQ: Nexperia's high-power GaN FETs enable a new generation of efficient power supply designs: Live broadcast details:Nexperia's high-power GaN FETs enable a new generation of efficient power supply designsLive lecturer: Chen Qiuming | Nexperia GaN FET Chief Application EngineerFAQ 1. In actual...; EEWORLD社区 Power technology

Detecting the keystrokes and outputting them to the digital tube does not display correctly: [i=s]This post was last edited by JLennon on 2018-2-2 08:35[/i] The program is as follows, and the proteus code is attached. The buttons K8, K12, and K16 cannot be displayed. What went wrong? I really...; JLennon Microchip MCU

Fujitsu FRAM Show me my third prize: A good multimeter, very helpful for experiments....; littleshrimp Integrated technical exchanges

Recommended MOS tube: Can you recommend a MOS tube with a smaller package, one N-channel for each P-channel, with a current of more than 5A and a voltage of more than 24V. The package should at least not be larger than SOP...; huoer 51mcu

I would like to ask if after calling wait_event_interruptible(), if the waiting condition is never met, can I set a timeout to jump out of wait_even with timer_list?: I want to know what to do if the waiting condition is not met after calling wait_event_interruptible(), but I want to return within a certain time? I added a timer_list (add(timer)) before calling wai...; jameguom Embedded System

Recruiting WINCE programmers: Our company is engaged in car audio, and we are in urgent need of ARM programmers. Requirements: 1. Bachelor degree or above, and must have worked in the car industry with GPS. 2. More than 1 year of ...; 课程设计 Embedded System

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components