Proto-pasta - 2.85mm Diameter -
Magnetic Rustable Iron Filament - 500g
PRODUCT ID: 3753
Pici up this filament today! It'd be Fusilli not to buy this filament! We
control?
can't tagliatelle you enough about this filament. Are these puns Spirali-ng out of
Sorry! We had to get that out of our system. Proto-pasta's fun packaging makes
us hungry for Italian food. If you're hankering for unusual and unique material
filaments, we've got a new spool of noodles for you!
This Proto-pasta 2.85mm Diameter 500g Filament in Magnetic & Rustable
Iron opens up a new world of 3D-printed fun
with
electronics!
Proto-pasta Conductive PLA is an FFF/FDM filament, so now you can print circuit
assembles with touch or light sensors or LEDs to your gamut of 3D printed
creations!
Since this filament behaves similarly to iron, it's actually ferromagnetic, as
this filament, but 3D printed projects will not behave as magnets.
This filament behaves similarly to iron - even to the point of rusting - making it
a fantastic choice for costumes and props, so you can achieve that beautiful,
aged appearance.
eating.
And, of course, even though it has the word "Pasta" in the name, it's
not
for
This filament performs best when extruded between 185°C and 215°C.
Check out Proto-pasta's helpful tips for rusting methods!
If you're looking for more information on the different types of 3D printing
material, here's a great tutorial on our Learn System!
opposed to magnetic. This means that magnets will stick to items printed with
TECHNICAL DETAILS
Resistivity:
Volume resistivity of molded resin (not 3D Printed): 15 ohm-cm
Volume resistivity of 3D printed parts along layers (x/y): 30 ohm-cm
Resistance of a 10cm length of 2.85mm filament: 600ohm
Volume resistivity of 3D printed parts against layers (z): 115 ohm-cm
Bed Temp (if available, is not required): 50°C
Hot End Temp: 215 – 230°C (Proto-pasta runs it on the hotter side to encourage
layer adhesion)
Performance:
Strength: Fair strength. More flexible than PLA, but less layer adhesion
Stiffness: Low, semi-flexible
Heat Resistance: Similar to PLA, use below 50ºC
Layer Adhesion: Fair layer adhesion. Not as good as normal PLA
Flexibility: Filament is quite flexible but will break if bent repeatedly
(particularly 2.85mm). Printed parts are rigid if more than a mm or two
thick. Thin sections are somewhat flexible but fail along layer lines if
flexed more than a few times.
Failure Mode: If flexed to breakage, failure will be along layer lines.
Warping: Very low warping
prints
Dual-Head compatibility: Compatible with (sticks to) PLA in dual material
Proto-pasta Conductive PLA is a compound of Natureworks 4043D PLA, a
is compatible with any PLA printing printer.
dispersant and conductive carbon black. In filament form, it is very flexible, and
https://www.adafruit.com/product/3753 3-12-18
京公网安备 11010802033920号
EEWORLD
