PTFE Skived Film Tape
5480 • 5481
Technical Data
Product Description
October, 2016
3M™ PTFE Skived Film Tape 5480 and 5481 tapes offer an extremely low coefficient of
friction which, in combination with a pressure sensitive silicone adhesive, creates a
smooth, non-stick surface over a variety of substrates to assist in the movement of web
materials in many types of roll-wrap applications
Backing
Skived PTFE
(polytetrafluoroethylene)
Adhesive
Silicone
Color
Gray
Standard Roll Length
36 yds. (32.9 m)
Product Construction
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
ASTM Test Method
3M tape 5480
Adhesion to Steel:
Tensile Strength:
Elongation at Break:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
3M tape 5481
Adhesion to Steel:
Tensile Strength:
Elongation at Break:
Backing Thickness:
Total Tape Thickness:
Temperature Use Range:
32 oz./in. width (35 N/100 mm)
59 lbs./in. width (1039 N/100 mm)
290%
5.0 mils (0.13 mm)
6.8 mils (0.17 mm)
-65° to 500°F (-54° to 260°C)
D-3330
D-3759
D-3759
D-3652
D-3652
20 oz./in. width (22 N/100 mm)
26 lbs./in. width (461 N/100 mm)
140%
2.0 mils (0.05 mm)
3.7 mils (0.09 mm)
-65° to 500°F (-54° to 260°C)
D-3330
D-3759
D-3759
D-3652
D-3652
Features
• Skived 3M™ PTFE Film Tapes are more conformable than typical extruded PTFE film
tapes.
• Provides excellent chemical resistance except to organic solvents.
Note:
The silicone
adhesive will be attacked by commercial organic solvents and so are not
recommended for applications requiring organic resistance.
• Silicone adhesive provides clean removal from a variety of surfaces.
• Non-stick PTFE film provides an exceptionally slick surface for easy clean-up.
3M
™
PTFE Skived Film Tape
5480• 5481
Application Ideas
•
Easy-release surface provided by wrapping rollers, plates, belts, etc. where build-
up of sticky materials and inks can occur.
Shielding and protecting against chemicals.
Mold release for composite or metal bonding.
High temperature wire bundling and harnessing.
High strength and abrasion resistance reduce friction between surfaces,
minimizing squeak and noise.
Wide temperature range for performance on heated machinery and equipment.
CAUTION:
When PTFE film tape is exposed to temperatures above 600°F (316°C),
small quantities of hazardous vapors may be released. INHALATION OF THESE
VAPORS MAY BE HARMFUL OR MAY CAUSE RESPIRATORY TRACT
IRRITATION. Do not heat or expose PTFE film tape to temperatures above 600°F
(316°C).
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.
To obtain best performance, use this product within 24 months from date of
manufacture.
The technical information, recommendations and other statements contained in this document are based
upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Storage
Shelf Life
Technical Information
Product Use
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M
ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR
CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option,
replacement of the 3M product or refund of the purchase price.
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO 9001 2000
:
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 220-3S-06
800-362-3550
·
577-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2016
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
