SMB/SMC/Mini-75Ohm SMB Crimp Type Right Angle Plugs
and Right Angle Bulkhead Jacks for Flexible Cable
1. Identify connector parts. (4 piece parts: crimp sleeve, body
assembly, expansion cap and covering ring. Die cast body
only.)
2. Strip cable to dimensions shown. Do not nick braid or center
conductor. A wire stripper of correct size is recommended for
this step. Twist stranded center conductor into tight bundle
and tin (optional). Slide crimp sleeve onto cable as shown.
3. Flare braid and slide cable into body assembly making
certain that the cable insulation bottoms on center contact.
Arrange braid uniformly around crimp stem of body
assembly. Slide crimp sleeve over braid and crimp securely
using recommended crimp tool.
4. Solder center conductor to contact through the rear and side
access ports. Use a minimum amount of solder for a good
joint. .020 (0.51) diameter solder is recommended. Place
expansion cap in access port and seat with a .125 (3.17)
diameter flat punch. Snap cover ring over side access port if
applicable.
Cable Group
RG-178/U, 196
RG-316/U, 161, 174, 179, 187, 188
RG-179 DS, 187 DS,188DS, 316 DS
RG-316/U, 161, 174,179, 187, 188
RG-179 DS, 187 DS,188 DS, 316 DS
RG-178/U, 196
RG-316/U, 161, 174,179, 187, 188
RG-179 DS, 187 DS,188 DS, 316 DS
RG-58/U, 141, 303
RG-316/U, 161, 174, 188
316 DS, 188 DS
RG-179/U, 187
RG-179/U, 187, 316,
161, 174, 188
RG-179 DS, 187 DS
316 DS, 188 DS
RG-59
BELDEN 735A
RG-316/U, 188, 174, 179, 187
RG-316 DS, 188 DS, 179 DS, 187 DS
Part No.
131-1402-101/116
131-1403-101/116
131-1404-101/116
131-3303-501/506
131-3304-501/506
131-3402-101/116
131-3403-101/116
131-3404-101/116
131-3407-101/106
131-6403-101/106
131-6404-101/106
131-6433-101/106
131-8403-101/106
131-8403-111/116
131-8404-101/106
131-8404-111/116
131-8409-101/106
131-8445-101/106
131-9403-101/116
131-9404-101/116
“A”
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.177 (4.50)
.177 (4.50)
.177 (4.50)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.177 (4.50)
.219 (5.56)
.177 (4.50)
.219 (5.56)
.219 (5.56)
.177 (4.50)
.177 (4.50)
.177 (4.50)
“B”
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.289 (7.34)
.289 (7.34)
.289 (7.34)
.289 (7.34)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.289 (7.34)
.312 (7.92)
.289 (7.34)
.312 (7.92)
.289 (7.34)
.289 (7.34)
.289 (7.34)
2.89 (7.34)
Crimp Hex
.105 (2.67)
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.213 (5.41)
.128 (3.25)
.151 (3.83)
.151 (3.83)
.128 (3.25)
.128 (3.25)
.151 (3.83)
.151 (3.83)
.255 (6.48)
.178 (4.52)
.128 (3.25)
.151 (3.83)
258
Cinch Connectivity Solutions Waseca
299 Johnson Avenue SW, Suite 100
Waseca, MN 56093 USA
© 2017 Cinch Connectors, Inc.
+1 507.833.8822
inquiry@cinch.com
cinch.com
ccsjai 02.17
京公网安备 11010802033920号
EEWORLD
