Telecom Tools
Telecom workers prefer Klein
tools for their exceptional quality,
performance, and long working
life. That's why Klein is the brand
the industry depends on.
Telecom Tools
Bell-System Pliers Selection Chart
Bell-System Designation
Type B Long-Nose
List 1 Long-Nose
Type B Short-Nose
Diagonal B-5
Cat. No.
D301-6
71980
D2291
D245-5
Bell-System Designation
Diagonal B V-Notch
Diagonal D-6
8" B Sidecut
9" B Sidecut
Cat. No.
D528V
72192
D213-8NE
D213-9NE
Bell-System Designation
C Pressing
C Pressing
Cat. No.
D234-6
VDV026-049
Diagonal Bell-System Pliers - "W" & "V" Notches
•
"W" notches to cleanly slit insulation
•
"V" notch at the hinge for quick insulation crushing
•
Tapered nose for easy working in confined areas and close tip cutting
D528V
Cat. No.
D528V
Overall Length
5-13/16" (147.6 mm)
Jaw Length
13/16" (20.6 mm)
Jaw Width
9/16" (14.3 mm)
Jaw Thickness
3/8" (9.5 mm)
Cutting Knives
Standard
Handle Finish
Plastic-Dipped
Handle Color
Red
Weight
3.2 oz. (91 g)
Diagonal Telephone Work Pliers - Type D-6 - "V" Notches
•
Tapered nose for easy working in confined areas and close tip cutting
•
Convenient 0.030" and 0.045" stripping holes
•
"V" stripping notch in jaw for quick insulation slitting
•
Serrated behind the hinge to crush insulation
72192
Cat. No.
72192
Overall Length
6-1/8" (155.6 mm)
Jaw Length
13/16" (20.6 mm)
Jaw Width
3/4" (19.1 mm)
Jaw Thickness
7/16" (11.1 mm)
Cutting Knives
Standard
Handle Finish
Plastic-Dipped
Handle Color
Red
Weight
5.3 oz. (150 g)
Connector Crimping Pliers
•
Crimps UR/UY/UG insulation displacement connectors (IDC) - Scotchlok
•
Curved handles for greater control
•
Induction-hardened side-cutting knives for long life
®
type connectors
D234-6
UR IDC
Cat. No.
D234-6
D234-6C
Overall Length
5-13/16" (147.6 mm)
5-13/16" (147.6 mm)
Jaw Length
1-3/32" (27.8 mm)
1-3/32" (27.8 mm)
Jaw Width
11/16" (17.5 mm)
11/16" (17.5 mm)
Jaw Thickness
3/8" (9.5 mm)
3/8" (9.5 mm)
Knife Length
1/2" (12.7 mm)
1/2" (12.7 mm)
Handle Finish
Plastic Dipped
Plastic Dipped
UG IDC
Handle Color
Yellow
Yellow
UY IDC
Weight
4.0 oz. (113 g)
4.0 oz. (113 g)
*Spring-loaded action for self-opening. Scotchlok
®
is a registered trademark of 3M.
28
See page 310 for additional information on warnings.
www.kleintools.com
Telecom Tools
Long-Nose Pliers - Connector Crimping
•
Crimps UR/UY/UG insulation displacement connectors (IDC) - Scotchlok
•
Grooved jaws for wire wrapping, looping and twisting
•
Cleanly strips 23 AWG and 24 AWG wire
•
Hot-riveted joint ensures smooth action and no handle wobble
•
Induction-hardened cutting surface for long life
®
type connectors
VDV026-049
Scotchlok
®
is a registered trademark of 3M Corporation.
UR IDC
Jaw Thickness Knife Length
Point Diameter
3/8" (9.5 mm)
7/16" (11.1 mm) 0.095" x 0.125"
(2.41 mm x 3.17 mm)
Handle Finish
Plastic Dipped
UG IDC
Handle Color
Yellow
UY IDC
Weight
4.5 oz. (128 g)
Cat. No.
VDV026-049
Overall Length
6-51/64" (172.6 mm)
Jaw Length Jaw Width
2" (50.8 mm) 45/64" (17.9 mm)
Long-Nose Telephone Work Pliers - Stripping
•
Cleanly strips 22 (0.34 mm²) to 24 (0.25 mm²) AWG wire
•
Convenient insulation crushing slot
•
Curved handles provide greater tool control
D2291
Cat. No.
D2291
Overall Length
6" (152.4 mm)
Jaw Length
1-1/4" (31.8 mm)
Jaw Width
11/16" (17.5 mm)
Jaw Thickness
3/8" (9.5 mm)
Point Diameter
1/16" x 3/32"
(1.6 mm x 2.4 mm)
Handle Finish
Plastic-Dipped
Handle Color
Yellow
Weight
4.0 oz. (113 g)
Long-Nose Telephone Work Pliers - Type L1
•
Knurled jaw tips for greater gripping power
•
Induction-hardened side-cutting knives for long life
•
Convenient 0.030" stripping hole
•
Curved handles provide greater tool control
Cat. No. Type
71980
L1
Overall Length Jaw Length
6-5/8" (168.3 mm) 1-7/8" (47.6 mm)
Jaw Width
Jaw Thickness
11/16" (17.5 mm) 3/8" (9.5 mm)
Knife Length
1/2" (12.7 mm)
Point Diameter Handle Finish
1/16" x 3/32"
Plastic-Dipped
(1.6 mm x 2.4 mm)
71980
Handle Color Weight
Yellow
4.0 oz. (113 g)
Standard Long-Nose Pliers - Switchboard Work
•
Cleanly strips 19 & 22 AWG wire
•
Induction-hardened, long-lasting cutting knives
•
Knurled jaws for sure wrapping and looping
•
Curved handles provide greater tool control
Cat. No.
D203-6H2
Overall Length
6-5/8" (168.3 mm)
Jaw Length
1-7/8" (47.6 mm)
Jaw Width
11/16" (17.5 mm)
Jaw Thickness Knife Length
3/8" (9.5 mm)
1/2" (12.7 mm)
Point Diameter
3/32" (2.4 mm)
Handle Finish
Plastic-Dipped
Handle Color
Yellow
D203-6H2
Weight
4.2 oz. (119 g)
See page 310 for additional information on warnings.
29
www.kleintools.com
Telecom Tools
Can Wrench
Bell System Type Wrench
68005
•
Two tools in one saves space in your pouch
•
One end opens telephone box fasteners, the other end tightens nuts on
binding-post terminals
•
The 7/16" socket has a black finish and the 3/8" socket has a silver finish
1-1/4"
deep to
•
Sockets arefor easy(32 mm)into tightfit over long binding posts and are
thin-walled
access
areas
•
Socket ends are color-coded for quick identification of socket sizes
•
Hex-socket design enables using a wrench to obtain extra torque
•
High-impact, break-resistant handle for long and dependable service
•
Sockets are heat-treated, alloy steel
Cat. No. Size
68005
3/8" and 7/16"
Hex Nut
Length
7" (177.8 mm)
Handle Diameter
1" (25.4 mm)
Weight
5.6 oz. (159 g)
•
End openings sized to NEMA hardware specifications
•
Silver painted finish
Cat. No.
3146B
Size
Large End: 1-1/16" (27.0 mm) and
1-3/16" (30.2 mm) Small End: 11/16"
(17.5 mm) and 7/8" (22.2 mm)
Length
13" (330.2 mm)
3146B
Weight
1.8 lbs. (0.82 kg)
Steel Strand Wire Pulling Grips
Bell System B, L, and H Chicago
®
Grips
equipped
•
All arefalling off ofwith chain, toggle and shackle - keeps the grip
from
cable
designed to pull
•
1659-5AT ishas serpentine jaw1/4" (6.35 mm) figure-8 telephone
cable. Also
Cat. No.
1659-5AT
1684-5AT
1692-5AT
1628-16AT
Type
"B" Strand Puller
"L" Strand Puller
"L" Strand Puller
"H" Strand Puller
Cable Diameter
0.20" to 0.37"
(5.08 to 9.4 mm)
0.218" to 0.550"
(5.54 to 13.97 mm)
0.218" to 0.550"
(5.54 to 13.97 mm)
0.31" to 0.62"
(7.87 to 15.75 mm)
Jaw Length
5" (127.0 mm)
5" (127.0 mm)
5" (127.0 mm)
7-1/4" (184.2 mm)
Weight
6.7 lbs.
(3.04 kg)
6.9 lbs.
(3.13 kg)
6.6 lbs.
(2.99 kg)
15.8 lbs.
(7.17 kg)
5,000 lbs. (2,268 kg) Maximum Safe Load
8,000 lbs. (3,629 kg) Maximum Safe Load
1659-5AT
15,000 lbs. (6,803 kg) Maximum Safe Load
*1692-5AT (larger clamping force than 1684-5AT)
WARNING:
Grips are to be used for temporary installation,
not for permanent anchorage.
WARNING:
When used on/or near energized lines, ground,
WARNING:
Do not exceed rated capacity.
WARNING:
Always match proper size and type of grip to application.
WARNING:
Before each use, clean jaw area and inspect grip for
proper operation to avoid slippage.
insulate, or isolate grip before pulling.
30
See page 310 for additional information on warnings.
www.kleintools.com