Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Temperature 150°C Ultra-Stable X8R Dielectric, 10 – 100 VDC (Commercial & Automotive Grade)
Packaging C-Spec Ordering Options Table
Packaging Type
Commercial Grade
1
Bulk Bag
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
7" Reel
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not Required (Blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Automotive Grade
3
AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
AUTO7210 (EIA 0805 and larger case sizes)
3190
3191
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel
Packaging Quantities” and “Tape & Reel Packaging Information”.
3
For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.
3
All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For
more information see “Capacitor Marking”.
Benefits
−55°C to +150°C operating temperature range
Lead (Pb)-Free, RoHS and REACH compliant
EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes
DC voltage ratings of 10 V, 16 V, 25 V, 50 V and 100 V
Capacitance offerings ranging from 0.5 pF to 0.22 μF
Available capacitance tolerances of ±0.10 pF, ±0.25 pF,
±0.5 pF, ±1%, ±2%, ±5%, ±10%, and ±20%
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
•
•
•
•
•
•
• No capacitance change with respect to applied rated DC
How to choose the input and output capacitors of DCDC/LDO, for example, DCDC 12V-5V LDO 5V-3.3V
How to choose the capacitors for 12V 5V of DCDC, and then how to choose the capacitors for 5V 3.3V of LD...
[i=s]This post was last edited by wowogogo on 2016-5-14 14:46[/i] Asking for advice: The incubator device has an alarm interface with 2 wires, which are connected when an alarm occurs and disconnected...
TE Connectivity (TE) Webinar Learning Center has carefully prepared a wealth of technical lectures and video training for you. It not only restores the TE booth at the large exhibition site, but also ...
1. Introduction The on-chip FLASH of MSP430F5438 can be used as EEPROM. This part of FLASH is called INFO FLASH. There are 4 blocks of 128Byte each. Although the capacity of INFO FLASH is relatively s...
[size=4]The serial port receiving and sending program of MSP430 microcontroller involves multiple registers, which can be configured step by step according to the following steps: [/size] [size=4]1. F...
[url=http://www.yklink.com/Share/][size=3][color=black]Computer Sharing Device[/color][/size][/url][size=3][color=black]It is a network PC system that transforms an ordinary computer into a server. Ea...
Analog electronics
京公网安备 11010802033920号
EEWORLD
