EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
MS8E PACKAGE
8-LEAD PLASTIC MSOP
T
JMAX
= 150°C,
θ
JA
= 29°C/W TO 45°C/W,
θ
JC
= 5°C/W to 10°C/W
EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
ORDER INFORMATION
LEAD FREE FINISH
LT3063EDCB#PBF
LT3063IDCB#PBF
LT3063HDCB#PBF
LT3063MPDCB#PBF
LT3063EMS8E#PBF
LT3063IMS8E#PBF
LT3063HMS8E#PBF
LT3063MPMS8E#PBF
LT3063EDCB-3.3#PBF
LT3063IDCB-3.3#PBF
LT3063EDCB-5#PBF
LT3063IDCB-5#PBF
LT3063EMS8E-3.3#PBF
LT3063IMS8E-3.3#PBF
LT3063EMS8E-5#PBF
LT3063IMS8E-5#PBF
TAPE AND REEL
LT3063EDCB#TRPBF
LT3063IDCB#TRPBF
http://www.linear.com/product/LT3063#orderinfo
PART MARKING* PACKAGE DESCRIPTION
LGMZ
LGMZ
LGMZ
LGMZ
LTGNB
LTGNB
LTGNB
LTGNB
LGYV
LGYV
LGYW
LGYW
LTGZD
LTGZD
LTGZC
LTGZC
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead (2mm x 3mm) Plastic DFN
8-Lead (2mm x 3mm) Plastic DFN
8-Lead (2mm x 3mm) Plastic DFN
8-Lead (2mm x 3mm) Plastic DFN
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
LT3063HDCB#TRPBF
LT3063MPDCB#TRPBF
LT3063EMS8E#TRPBF
LT3063IMS8E#TRPBF
LT3063HMS8E#TRPBF
LT3063MPMS8E#TRPBF
LT3063EDCB-3.3#TRPBF
LT3063IDCB-3.3#TRPBF
LT3063EDCB-5#TRPBF
LT3063IDCB-5#TRPBF
LT3063EMS8E-3.3#TRPBF
LT3063IMS8E-3.3#TRPBF
LT3063EMS8E-5#TRPBF
LT3063IMS8E-5#TRPBF
Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
For more information on lead free part marking, go to:
http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to:
http://www.linear.com/tapeandreel/.
Some packages are available in 500 unit reels through
designated sales channels with #TRMPBF suffix.
2
3063fa
For more information
www.linear.com/LT3063
LT3063 Series
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. (Note 3)
PARAMETER
Minimum Input Voltage (Note 4)
Regulated Output Voltage (Note 5)
CONDITIONS
I
LOAD
= 200mA
LT3063-3.3: V
IN
= 3.9, I
LOAD
= 1mA
LT3063-3.3: 3.9V < V
IN
< 45V, 1mA < I
LOAD
< 200mA
LT3063-5: V
IN
= 5.6, I
LOAD
= 1mA
LT3063-5: 5.6V < V
IN
< 45V, 1mA < I
LOAD
< 200mA
V
IN
= 2.1V, I
LOAD
= 1mA
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 200mA (E-, I-Grades)
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 200mA (MP-, H-Grades)
LT3063-3.3: ΔV
IN
= 3.9V to 45V (E-, I-Grades)
LT3063-5: ΔV
IN
= 5.6V to 45V (E-, I-Grades)
LT3063: ΔV
IN
= 2.1V to 45V (E-, I-Grades)
LT3063: ΔV
IN
= 2.1V to 45V (MP-, H-Grades)
Load Regulation (Note 4)
I
LOAD
= 1mA to 200mA
LT3063-3.3: V
IN
= 3.9V (E-, I-Grades)
LT3063-5: V
IN
= 5.6V (E-, I-Grades)
LT3063: V
IN
= 2.1V (E-, I-Grades)
LT3063: V
IN
= 2.1V (MP-, H-Grades)
Dropout Voltage
V
IN
= V
OUT(NOMINAL)
(Notes 6, 7)
I
LOAD
= 1mA
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 10mA
I
LOAD
= 100mA
I
LOAD
= 100mA
I
LOAD
= 200mA
I
LOAD
= 200mA
GND Pin Current
V
IN
= V
OUT(NOMINAL)
+ 0.6V
(Notes 6, 8)
I
LOAD
= 0
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 100mA
I
LOAD
= 200mA
C
OUT
= 10µF, I
LOAD
= 200mA, C
REF/BYP
= 0.01µF
V
OUT
= 600mV, BW = 10Hz to 100kHz
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
ELECTRICAL CHARACTERISTICS
MIN
3.267
3.234
4.950
4.900
594
588
585
TYP
1.6
3.3
5
600
600
600
1.6
3.1
0.5
7.1
7.6
0.3
65
130
MAX
2.1
3.333
3.366
5.050
5.100
606
612
612
22
33
4
6
28
39
4
9
110
180
180
270
290
430
360
530
90
120
500
4
10
UNITS
V
V
V
V
V
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
µA
µA
µA
mA
mA
µV
RMS
ADJ Pin Voltage (Notes 4, 5)
Line Regulation (Note 4)
I
LOAD
= 1mA
l
250
l
300
l
l
l
l
l
l
45
70
225
2
5
30
15
0.3
0.8
0.7
1.2
1.25
58
55
70
73
70
85
320
Output Voltage Noise
ADJ Pin Bias Current (Notes 4, 9)
Shutdown Threshold
SHDN
Pin Current (Note 10)
Quiescent Current in Shutdown
Ripple Rejection
V
IN
– V
OUT
= 1.5V (AVG), V
RIPPLE
= 0.5V
P-P
,
f
RIPPLE
= 120Hz, I
LOAD
= 200mA
Current Limit
Input Reverse Leakage Current
Output Discharge Time (Note 6)
Reverse Output Current
60
1.5
<1
3
3
nA
V
V
µA
µA
µA
dB
dB
dB
mA
mA
V
OUT
= Off to On
V
OUT
= On to Off
V
SHDN
= 0V
V
SHDN
= 45V
V
IN
= 45V, V
SHDN
= 0V
LT3063-3.3
LT3063-5
LT3063 (Note 4)
V
IN
= 7V, V
OUT
= 0
V
IN
= V
OUT(NOMINAL)
+ 1V (Note 11), ΔV
OUT
= –5%
V
IN
= -45V, V
OUT
= 0
V
OUT
Discharged to 10% of Nominal, C
OUT
= 10μF
LT3063-3.3: V
OUT
= 3.3, V
IN
= V
SHDN
= 2.1V
LT3063-3.3: V
OUT
= 5, V
IN
= V
SHDN
= 2.1V
LT3063: V
OUT
= 3.3, V
IN
= V
SHDN
= 2.1V (Note 4)
l
l
l
l
l
l
l
220
1
0.75
7.3
8.4
2.5
2
15
15
15
mA
ms
μA
μA
μA
3063fa
For more information
www.linear.com/LT3063
3
LT3063 Series
ELECTRICAL CHARACTERISTICS
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2:
Absolute maximum input to output differential voltage is not
achievable with all combinations of rated IN pin and OUT pin voltages.
With the IN pin at 50V, the OUT pin may not be pulled below 0V. The total
measured voltage from IN to OUT must not exceed ±50V.
Note 3:
The LT3063 is tested and specified under pulse load conditions
such that T
J
≅
T
A
. The LT3063E regulators are 100% tested at T
A
= 25°C
and performance is guaranteed from 0°C to 125°C. Performance at
–40°C to 125°C is assured by design, characterization and correlation
with statistical process controls. The LT3063I regulators are guaranteed
over the full –40°C to 125°C operating junction temperature range. The
LT3063MP regulators are 100% tested over the –55°C to 150°C operating
junction temperature. The LT3063H regulators are 100% tested at the
150°C operating junction temperature. High junction temperatures degrade
operating lifetimes. Operating lifetime is derated at junction temperature
greater than 125°C.
Note 4:
The LT3063 adjustable version is tested and specified for these
conditions with the ADJ connected to the OUT pin.
Note 5:
Maximum junction temperature limits operating conditions. The
regulated output voltage specification does not apply for all possible
combinations of input voltage and output current. Limit the output current
range if operating at the maximum input voltage. Limit the input-to-output
voltage differential if operating at maximum output current. Current limit
foldback limits the maximum output current as a function of input-to-
output voltage. See Current Limit vs V
IN
– V
OUT
in the Typical Performance
Characteristics section.
Note 6:
To satisfy minimum input voltage requirements, the LT3063
adjustable version is tested and specified for these conditions with an
external resistor divider (bottom 60k, top 230k) for an output voltage of
2.9V. The external resistor divider adds 10µA of DC load on the output.
The external current is not factored into GND pin current.
Note 7:
Dropout voltage is the minimum input-to-output voltage
differential needed to maintain regulation at a specified output current. In
dropout, the output voltage equals: (V
IN
– V
DROPOUT
).
Note 8:
GND pin current is tested with V
IN
= V
OUT(NOMINAL)
+ 0.6V and a
current source load. GND pin current will increase in dropout. See GND
pin current curves in the Typical Performance Characteristics section. For
fixed voltage options, an internal resistor divider will add 5μA to the GND
pin current. See the GND Pin Current curves in the Typical Performance
Characteristics section.
Note 9:
ADJ pin bias current flows out of the ADJ pin.
Note 10:
SHDN
pin current flows into the
SHDN
pin.
Note 11:
To satisfy requirements for minimum input voltage, current limit
is tested at V
IN
= V
OUT(NOMINAL)
+ 1V or V
IN
= 2.1V, whichever is greater.
Note 12:
This IC includes thermal limit which protects the device during
momentary overload conditions. Junction temperature exceeds 125°C
(E- and I-Grades) or 150°C (MP- and H-Grades) when thermal limit is
active. Continuous operation above the specified maximum junction
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:00[/i] [color=#ff8c00]Taste is a series of thoughts, practices, views, and concepts. It cannot be obtained by piling up money. The hous...
[align=left][color=rgb(46, 46, 46)][font="]Operational amplifiers are very high gain amplifiers with differential inputs and single-ended outputs. They are often used in high-precision analog circuits...
The teacher assigned a topic as shown in the first screenshot. I am responsible for the software part. I need to use the 430 single-chip f5529 to write DA output, adjustable, display, and write it in ...
I transplanted a program, and the computer sent commands to 430 through the serial port debugging assistant, and then 430 controlled the LED on and off according to the corresponding commands. However...
I use 430 TimeB to output 3.3V PWM wave, connect it to RC filter circuit, and simulate DAC. Because the maximum voltage of DAC is 5V, I want to convert 3.3V PWM wave into 5V. The initial method is to ...
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
We are entering a new era where people are increasingly affordably equipped with more electronic gadgets. Electronics have become essential to our lives. For example, the average consumer now owns ...[Details]
Today's security industry has entered the era of massive networking. Many enterprises, especially financial institutions, have established multi-level video surveillance networking platforms. Lever...[Details]
The automotive industry in 2025 is undergoing a thorough intelligent reshuffle.
Geely wants to make changes in the field of AI cockpits: in the future, there will be no traditional smart...[Details]
Laird Thermal Systems has introduced the HiTemp ET series Peltier cooler modules, which can operate at high temperatures and provide on-site cooling for sensitive electronic devices.
Dig...[Details]
Keysight Technologies is combining its electromagnetic simulator with Synopsys' AI-driven RF design migration flow to create an integrated design flow for migrating from TSMC's N6RF+ process techno...[Details]
1. Multi-channel DAC technology bottleneck
Currently,
the development of multi-channel DAC technology focuses on two core challenges.
First, industrial applications urgently ...[Details]
Plessey Semiconductors has been acquired by Haylo Labs, which was established in March last year with a $100 million, five-year loan from Chinese technology company Goertek.
Haylo Labs w...[Details]
Magna's integrated in-cabin perception system fuses vision and millimeter-wave radar data to detect the presence of passengers, identify stranded children, monitor driver fatigue and vital signs, a...[Details]
Introduction: In digital circuit calculations, there is no concept of decimal points. You know where the decimal is, but the circuit does not know where the decimal point is. Therefore, you need to...[Details]
introduction
A common voltage regulator is a three-terminal one. Its function is to step down the voltage and stabilize it at a fixed output value. Voltage regulators are commonly available in...[Details]
The automotive driveshaft is a crucial connecting component in the automotive mechanical system. It is a circular component that allows for connection or assembly, as well as movement and rotation....[Details]
Recently, I received a request to use OK1028A-C to output PWM square wave. However, I found that there was no relevant instructions on the OK1028 platform, so I started writing this article.
A...[Details]
On August 19, Huawei's Executive Director and Chairman of the Device BG, Richard Yu, shared a Weibo post about a conversation he had with a Zunjie S800 owner. The owner had driven over 5,000 kilome...[Details]
Mr. Wang, a BYD owner, recently experienced a "5-minute charge" at a highway service area, boasting a 400-kilometer range. He marveled at the rapid evolution of new energy technol...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD
