The Crimplok+ Connectors and Tools are RoHS compliant.*
Features
No splice, gel or adhesive
Simple one-piece assembly tools
Angle nano finishing tool for
SC/APC connectors
Polishing film/Protrusion-setting cap
with every connector
APC:
Green lapping film /
Translucent white cap
UPC:
White lapping film /
Translucent blue cap
One-piece, pre-assembled design
Field termination
SC/APC angle polish
Benefits
No splice interface/potential optical loss point
Fast, easy installation without electrical power
Helps eliminate high CapEx of angle cleaver
Always have new polishing film and appropriate
protrusion-setting caps for respective APC and
UPC connectors
No small, loose parts
Always the right cable length with virtually no cable
slack to store
Low reflectance, <-60 dB for outdoor temperatures
3M
™
Crimplok
™
+ Connector SC Specifications
Multimode
6700-AT/62.5
(OM3/4)
Insertion Loss (dB) typical
Reflectance (dB) typical at
room temp
Reflectance (dB) max over
operating temperature range
Operating temperature
range (°C)
Storage temperature (°C)
Connector identification
Field termination kit
0.2
<-25
<-25
-10°C to 60°C
-10°C to 60°C
beige/white
8765T-UPC
Multimode
6700-AT/50 (OM2)
0.2
<-30
<-30
-10°C to 60°C
-10°C to 60°C
black/white
8765T-UPC
Multimode
6700-AT/50LOMMF
(OM1)
0.2
<-30
<-30
-10°C to 60°C
-10°C to 60°C
aqua/white
8765T-UPC
Singlemode
8700-AT/UPC
0.2
<-40
<-35
-40°C to 75°C
-40°C to 85°C
blue/white
8765T-UPC
Singlemode
8700-AT/APC
0.25
<-65
<-60
-40°C to 75°C
-40°C to 85°C
green/white
8765T-APC
Specifications Common to all 3M
™
Crimplok
™
+ Connectors
Material
Connector ferrule
Connector housing and body
Boot
Dimensions
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
8.1 x 9.0 x 45 mm (0.3'' x 0.3'' x 1.8'')
3M
™
Crimplok
™
+ Nano Finishing Tool SC/APC 8765-NF/APC
3M
™
Crimplok
™
+ Connector Kit SC/APC 8765T-APC contains all the
tools necessary for 3M
™
Crimplok
™
+ Connector 8700-AT/APC
3M
™
Crimplok
™
+ Activation Tool with
a 3M
™
Crimplok
™
+ SC/APC connector
3M
™
Crimplok
™
+ Connectors SC/UPC and
SC/APC with Protrusion-setting Caps
3M
™
Crimplok
™
+ Connector Ordering Information
Product Number
8700-AT/APC
8700-AT/UPC
6700-AT/62.5
6700-AT/50
6700-AT/50LOMMF
8765-AT/APC
8765-AT/UPC
8765T-APC
8765T-UPC
8700-AT/APC/C
8700-AT/UPC/C
6700-AT/62.5/C-60
6700-AT/50/C-60
6700-AT/50LOMMF/C-60
Product Descriptions
3M
™
Crimplok
™
+ Connector SC/APC SM 250/900 µm with Activation Tool
3M
™
Crimplok
™
+ Connector SC/UPC SM 250/900 µm with Activation Tool
3M
™
Crimplok
™
+ Connector SC MM 62.5 µm, (OM1) with Activation Tool
63M
™
Crimplok
™
+ Connector SC MM 50 µm, (OM2) with Activation Tool
3M
™
Crimplok
™
+ Connector SC MM 50 µm, (OM3/4) with Activation Tool
3M
™
Crimplok
™
+ SC/APC Activation Tool
3M
™
Crimplok
™
+ SC/UPC Activation Tool
3M
™
Crimplok
™
+ SC/APC Connector Installation Kit
3M
™
Crimplok
™
+ SC/UPC Connector Installation Kit
3M
™
Crimplok
™
+ Connector SC/APC SM 250/900 µm with Activation Tool,
Easy Cleaver
3M
™
Crimplok
™
+ Connector SC/UPC SM 250/900 µm with Activation Tool,
Easy Cleaver
3M
™
Crimplok
™
+ Connector SC MM 62.5 µm, (OM1) with Activation Tool,
Easy Cleaver
3M
™
Crimplok
™
+ Connector SC MM 50 µm, (OM2) with Activation Tool,
Easy Cleaver
3M
™
Crimplok
™
+ Connector SC MM 50 µm, (OM3/4) with Activation Tool,
Easy Cleaver
Packaging
60 connector/
pack
60 connector/
pack
60 connector/
pack
60 connector/
pack
60 connector/
pack
1 tool/pack
1 tool/pack
1 kit/pack
1 kit/pack
120 connector/
pack
120 connector/
pack
60 connector/
pack
60 connector/
pack
60 connector/
pack
3M ID
80611622004
80611622087
80611622111
80611622095
80611622103
80611621907
80611621998
80611622145
80611622459
80611622335
80611622343
80611622418
80611622400
80611622426
*“RoHS 2011/65/EU” means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive
2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on
information provided by third party suppliers to 3M.
3M and Crimplok are trademarks of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application.
You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications,
or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase.
3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product
or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M
product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
Reading excel table in wince5.0, there is a SpreadEC.exe file that can open XLS file in ce5.0, how can I call this .exe file in the program to read excel file, and then read the specified data into te...
As the title shows, the charging circuit on the left is composed of transformer T1, resistor R3, rectifier bridge VC and battery GB; the fluorescent lamp lighting circuit during power outage is compos...
[i=s]This post was last edited by paulhyde on 2014-9-15 03:35[/i] Apart from shooting down airplanes, another control question in the electric competition focuses on [size=5][color=#ff0000] [backcolor...
I'm a novice and need to use 7705 to make an alarm. The signal range is 0~1000mv. I don't know how to design the circuit. Does anyone have a program that can help me and lend it to me for reference? ....
I am using a touch screen to simulate a mouse, but the touch screen is used as an electronic drawing board. In addition to uploading the mouse coordinates, I also want to use a stylus to upload the st...
Emergency hand-held lamps powered by 6V maintenance-free batteries are widely used in rural areas. The charger used is a transformer step-down and single diode half-wave rectifier, and the charging...[Details]
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
1. Introduction to CIF Board
Fieldbus integration based on PC system
Whether it is a master or a slave, fieldbus has won unanimous praise in the field of PC-based automation. For more...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
Introduction
As the country increases its efforts to control the atmospheric environment, motorcycle emission regulations will become stricter year by year, and motorcycles that do not meet the...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]