5584 210 MM X 300 MM X 1.0 MM datasheet, PDF

Datasheet> All Categories > Thermal management products> 5584 210 MM X 300 MM X 1.0 MM

5584 210 MM X 300 MM X 1.0 MM: DescriptionTHERM PAD 300MMX210MM WHITE; CategoryThermal management products; File Size88KB，3 Pages; Manufacturer3M; Websitehttp://3M.com/esd; Environmental Compliance

Download Datasheet Parametric Compare View All

5584 210 MM X 300 MM X 1.0 MM Overview

THERM PAD 300MMX210MM WHITE

5584 210 MM X 300 MM X 1.0 MM Parametric

Parameter Name	Attribute value
use	-
type	Thermal Interface Pad, Sheet
shape	rectangle
shape	300.00mm x 210.00mm
thickness	0.0390"（0.991mm）
Material	silicone elastomer
Adhesive	Adhesive - both sides
base fabric, carrier	-
color	White
Thermal resistivity	-
Thermal conductivity	1.1 W/m-K

Preview

Download Datasheet

View All

Technical Data | September 2016

3M™ Thermally Conductive Silicone Interface Pad 5584

3M™

Thermally Conductive Silicone Interface Pad 5584 is designed to provide a preferential heat transfer path

between heat generating components and heat sinks, heat spreaders or other cooling devices. 3M pad 5584 consists of

a highly conformable and slightly tacky silicone elastomeric sheet filled with thermally conductive ceramic particles that

provide enhanced thermal conductivity and excellent electrical insulation performance.

Product Description

Key Features

•

Good softness and conformability even to non-flat surfaces

Good thermal conductivity

Good electrical insulation properties

Compression relaxation properties helps reduce pressure to electric components

Slight tack allows pre-assembly

Good wettability for improved and lower thermal resistance

Product Construction/Material Description

Note:

The following technical information and data should be considered representative or typical only and should not be used for

specification purposes.

3M™ Thermally Conductive Silicone Interface Pad 5584

Property

Color

Base resin

Thickness

Primary filler

Product liner

Value

White

Silicone

0.5 - 2.0 mm*

Ceramic

PET Film Liners

* Standard thickness range. Custom thickness options available up to 10 mm. Contact your local 3M Technical Representative for

more information.

PET Liner

Filled Silicone Elastomer

PET Liner

Applications

•

Integrated circuit (IC) chip packaging heat conduction

Heat sink interface

Chip on film (COF) heat conduction

LED board thermal interface material (TIM)

HD TV IC chip

General gap filling in electronic devices

3M™ Thermally Conductive Silicone Interface Pad 5584

Application Techniques

Substrate surfaces should be clean and dry prior to the thermal pad application to ensure best thermal performance.

A clean surface can improve the thermal performance of an application.

•

Isopropyl alcohol (isopropanol) applied with a lint-free wipe or swab should be adequate for removing surface

contamination such as dust or fingerprints. Do not use “denatured alcohol” or glass cleaners, which often

contain oily components. Allow the surface to dry for several minutes before applying the thermal pad. More

aggressive solvents (such as acetone, methyl ethyl ketone (MEK) or toluene) may be required to remove heavier

contamination (such as grease, machine oils, solder flux) but should be followed by a final isopropanol wipe as

described above.

Note:

Be sure to read and follow the manufacturers’ precautions and directions when using solvents.

•

Apply the thermal pad to one substrate at a modest angle with the use of a squeegee, rubber roller or finger

pressure to help reduce the potential for air entrapment under the thermal pad during its application.

•

Remove the release liner before application.

•

Assemble the part by applying compression to the substrates to ensure a good wetting of the substrate surfaces

with the thermal pads. Rigid substrates are more difficult to assemble without air entrapment as most rigid parts

are not flat. Flexible substrates can be assembled to rigid or flexible parts with much less concern about air

entrapment because one of the flexible substrate can conform to the other substrates during application.

Typical Physical Properties and Performance Characteristics

Note:

The following technical information and data should be considered representative or typical only and should not be used for

specification purposes.

Final product specifications and testing methods will be outlined in the products Certificate of Analysis

(COA) that is shipped with the product.

3M™ Thermally Conductive Silicone Interface Pad 5584

Property

Thermal Conductivity (W/m-K)

Density (g/cm

, @ 25°C)

Operating Temperature Range

Long Term (Weeks-Months)

Short Term (Hours-Days)

Shore 00

Dielectric Breakdown

Volume Resistivity

Method

ASTM D5470

ASTM D6111

3M test method

Modified ASTM D2240

Modified ASTM D149

(3M test method)

ASTM D257

Value

1.1 W/m-K

1.9

-50°C to 125°C

-50°C to 160°C

40 ~ 50

7 KV/mm

3 x 10

Ohms

Methods listed as ASTM are tested in accordance with the ASTM method, or a modified version of the test noted

Shore 00 results depend on test method and thickness of the sample tested.

Typical results are in the 40-50 Shore 00 range @ 6 mm test thickness.

Ask your 3M Technical Representative for more details on pad softness.

Storage and Shelf Life

The shelf life of

3M™ Thermally Conductive Silicone Interface Pad 5584

is 12 months from the date of manufacture

when stored in the original packaging materials and stored at 21°C (70°F) and 50% relative humidity.

The 3M Certificate of Analysis (COA) for this product is established when the product is commercially available from

3M and is shipped with the product. The COA contains the 3M specifications and test methods for the products

performance limits that the product will be supplied against. The 3M product is supplied to 3M COA test specifications

and the COA test methods. Contact your 3M Technical Representative for the COA for this product. This technical data

sheet may contain preliminary data that is not within the COA specification limits and/or test methods used for COA

purposes.

Certificate of Analysis (COA)

3M™ Thermally Conductive Silicone Interface Pad 5584

Regulatory:

For regulatory information about this product, contact your 3M representative.

Technical Information:

The technical information, recommendations and other statements contained in this document are based

upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use:

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and

performance of a 3M product in a particular application Given the variety of factors that can affect the use and performance of a 3M

product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and

suitable for user’s method of application.

Warranty, Limited Remedy, and Disclaimer:

Unless an additional warranty is specifically stated on the applicable 3M product

packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M

ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR

ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the

3M Product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M

product or refund of the purchase price.

Limitation of Liability:

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,

whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,

negligence or strict liability.

Electronics Materials Solutions Division

3M Center, Building 224-3N-11

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax

www.3M.com/electronics

3M is a trademark of 3M Company.

Please recycle.

60-5002-0924-6

5584 210 MM X 300 MM X 1.0 MM Related Products

	5584 210 MM X 300 MM X 1.0 MM	5584 210 MM X 300 MM X 0.5MM	5584-20	5584 210 MM X 300 MM X 1.5MM
Description	THERM PAD 300MMX210MM WHITE	THERM PAD 300MMX210MM WHITE	THERM PAD 300MMX210MM WHITE	THERM PAD 300MMX210MM WHITE
type	Thermal Interface Pad, Sheet	Thermal Interface Pad, Sheet	Thermal Interface Pad, Sheet	Thermal Interface Pad, Sheet
thickness	0.0390"（0.991mm）	0.0197"（0.500mm）	0.0790"（2.007 mm）	0.0591"（1.500mm）
Material	silicone elastomer	silicone elastomer	silicone elastomer	silicone elastomer
Adhesive	Adhesive - both sides	Adhesive - both sides	Adhesive - both sides	Adhesive - both sides
color	White	White	White	White
Thermal conductivity	1.1 W/m-K	1.1 W/m-K	1.1 W/m-K	1.1 W/m-K
shape	300.00mm x 210.00mm	300.00mm x 210.00mm	300.00mm x 210.00mm	300.00mm x 210.00mm

Recommended Resources

Bedside lamp safety switch circuit (1)

It excited switching regulator circuit diagram

Contactless timer circuit

LTC1159 application circuit diagram 1

160m band preamplifier with ferrite loop antenna

Temperature Stable Logarithmic Amplifier Circuit

Sample application questions: Is there a limit on the type and quantity of samples I can apply for each time? Are all the products on sale available and can I apply? Thank you...; lidonglei1 Microcontroller MCU

Why can't the function be implemented? There are no errors in compilation. Use timers to achieve precise changes.: [i=s]This post was last edited by Zhaowei0317 on 2018-3-30 23:17[/i] Why can't the function be realized? Is the logic wrong?...; 赵薇0317 51mcu

Preparation before the interview (repost): If the resume is the first weapon, then you can stand out from the crowd with your professional experience or a little difference. But whether you are qualified to be the "real gold" still needs one o...; 1234 Talking about work

Transition time violated during DC synthesis: When I was doing DC synthesis, I encountered transition time violatedmax_transition 5.00 - Transition Time 6.76 ------------------------------Slack -1.76 (VIOLATED) The values are all about -1.76. Som...; eeleader-mcu FPGA/CPLD

Detailed explanation of Ni-MH battery charger PCB design: [align=left][color=rgb(73, 73, 73)][font=微软雅黑][size=14px]1 Introduction to Protel Software[/size][/font][/color][/align][align=left][color=rgb(73, 73, 73)][font=微软雅黑][size=14px]With the rapid developm...; ohahaha PCB Design

The forum has opened a section called "Motor Control"!: [size=4]Important things should be said three times: [/size] [size=4][color=#ff0000]The forum has opened a "Motor Control" section! [/color][/size] [size=4][color=#000080]The forum has opened a "Motor...; okhxyyo Robotics Development

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components