devices implement a complete foreign exchange sta-
tion (FXS) telephony interface solution in a single package that conforms to all relevant
global specifications. The Si3219x ProSLIC ICs operate from a 3.3 V supply and have a
3-wire ISI digital interface with 1.8 to 3.3 V I/O. The Si3219x devices are designed to
operate with a capacitive boost tracking battery supply for lower power, cost, and foot-
print than other tracking supplies in the industry. Self-testing and metallic loop testing
(MLT) are facilitated by the built-in DSP, monitor ADC, and test load. The devices are
available with wideband audio for better-than-PSTN voice quality and DTMF detection.
The Si3219x devices are available in a 4 x 6 mm, 38-pin QFN package.
KEY FEATURES
• Complete FXS solution in a single 4 x 6
mm package
• Performs all BORSCHT functions
• Ideal for short- or medium-loop
applications
• Ultra-low power consumption
• Patented low-power ringing
• Adaptive ringing
• Dynamic overhead control
• Ringing current limiting
• Simplified configuration and diagnostics
• Supported by ProSLIC API
• Audio diagnostics with loopback
• Integrated test load
• Global programmability
• Wideband voice support
• On-hook transmission
• Loop or ground start operation
• Smooth polarity reversal
• A-Law/µ-Law companding, linear PCM
• Flexible integrated tracking dc-dc controller
supporting patent-pending low-cost
capacitive boost configuration
Applications:
• VoIP Gateways and Routers
• xDSL IADs
• Optical Network Terminals/Units (ONT/U)
• Analog Terminal Adapters (ATA)
• Cable eMTA
• Wireless Fixed Terminals (WFT)
• Wireless Local Loop (WLL)
• WiMAX CPE
Programmable
AC Impedance
and Hybrid
ADC
ADC
DAC
DAC
Linefeed
Linefeed
Control
Control
Linefeed
Linefeed
Monitor
Monitor
Linefeed
DTMF and
DTMF&
Tone Gen
Tone Gen
Caller ID
Host Interface
CODEC
CODEC
CODEC
SLIC
SLIC
TIP
FXS
RING
• Software-programmable parameters:
• Ringing frequency, amplitude, cadence,
and waveshape
• Two-wire ac impedance
• Transhybrid balance
• DC current loop feed (10–45 mA)
• Loop closure and ring trip thresholds
• Ground key detect threshold
• Pulse metering
• DTMF generation
• DTMF detection (Si32193)
• 3.3 V operation
• Support for 1.8 V I/O
• Maximum battery up to –100 V
• Pb-free/RoHS-compliant packaging
• 3-wire Integrated Serial Interface (ISI)
3-wire ISI
Ringing
Ringing
Generator
Generator
DSP
Line Diagnostics
Line Diagnostics
PLL
DC-DC Controller
Si3219x
silabs.com
| Building a more connected world.
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Preliminary Rev. 0.9
Si3219x: ProSLIC
®
Single FXS Solution
Ordering Guide
1. Ordering Guide
Table 1.1. Si3219x Ordering Guide
P/N
Si32192-A-FM1
Si32192-A-GM1
Si32193-A-FM1
Si32193-A-GM1
Si32192-A-ZM1
Si32192-A-ZM2
Si32193-A-ZM1
Description
Wideband FXS, ISI interface,
parametric MLT
Wideband FXS, ISI interface,
parametric MLT
Wideband FXS, ISI interface,
parametric MLT, DTMF detection
Wideband FXS, ISI interface,
parametric MLT, DTMF detection
Wideband FXS, ISI interface,
parametric MLT, customer-specific
Wideband FXS, ISI interface,
parametric MLT, customer-specific
Wideband FXS, ISI interface,
parametric MLT, DTMF detection, custom-
er-specific
Wideband FXS, ISI interface,
parametric MLT, DTMF detection, custom-
er-specific
Package Type
2
QFN38
QFN38
QFN38
QFN38
QFN38
QFN38
QFN38
Max V
BAT
–100 V
–100 V
–100 V
–100 V
–100 V
–100 V
–100 V
Temperature
0 to 70 °C
–40 to 85 °C
0 to 70 °C
–40 to 85 °C
0 to 70 °C
0 to 70 °C
0 to 70 °C
Si32193-A-ZM2
QFN38
–100 V
0 to 70 °C
Note:
1. Adding the suffix "R" to the part number (e.g. Si3219x-A-FMR) denotes tape and reel.
2. QFN - Quad-Flat No-leads.
Table 1.2. Ordering GuideSi3219x Evaluation Kits
Part Number
Si32193ACB10SL0EVB
Description
ISI Wideband FXS with DTMF detection and low-cost capacitive boost dc-dc convert-
er EVB
V
BAT
Max
1
–100 V
Note:
1. EVB V
BAT
max may be limited by BOM option.
silabs.com
| Building a more connected world.
Preliminary Rev. 0.9 | 1
Smart.
Connected.
Energy-Friendly.
Products
www.silabs.com/products
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or
intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical"
parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes
without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included
information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted
hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of
Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant
personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass
destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®,
Gecko®, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® and others are trademarks or registered trademarks of
Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or
brand names mentioned herein are trademarks of their respective holders.
I use CCS6 to write a program for TMS320F2812. I want to use CCS to check the time when the code is running.After I open this interface in CCS and confirm it, why doesn't the clock icon appear? Where ...
Aries: Will be very angry and say: How dare you insult me! Then he will rush up to hit that person, and will also try to get rid of the people who come to persuade him to stop and say: Let me go, don'...
I use the stm32f429 chip, have ported FreeRTOS, and have written many functions under this system. Now I want to add networking functions based on the current code. I am looking for a tutorial or exam...
I've been reading about digital electronics recently, and many questions are ambiguous. For example, in TTL inverter, there is a sentence that says "Since the collector loop resistance of T1 is the su...
[i=s] This post was last edited by paulhyde on 2014-9-15 03:26 [/i] Selection of outstanding works from the 2008 National Undergraduate Electronic Design Competition Information Security Technology Sp...
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
1 Introduction
In the mid-1960s, American scientist Maas conducted extensive experimental research on the charging process of open-cell batteries and proposed an acceptable charging curve for ...[Details]
Learned the following information.
Customer product: industrial computer motherboard
Glue application area: CPU/BGA filling
Glue color requirements: black or t...[Details]
Coal mines typically contain gas and coal dust. When gas and coal dust reach a certain concentration, they can cause explosions. Electrical equipment generates arcs during normal operation or durin...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
Bosch has released a new SoC series to support L2+ advanced driver assistance functions. The chip integrates high resolution and long-range detection capabilities, and has built-in support for neur...[Details]
The difference between a series inverter and a parallel inverter is that they use different oscillation circuits. A series inverter connects L, R, and C in series, while a parallel inverter connect...[Details]
With the gradual popularization of new energy vehicles in recent years, more and more people have been able to access and purchase electric vehicles. The structure of electric vehicles is composed ...[Details]
The Radxa Cubie A7A is a single-board computer (SBC) powered by the Allwinner A733 octa-core Cortex-A76/A55 SoC, equipped with a 3 TOPS AI accelerator and up to 16GB of LPDDR5 memory.
Fo...[Details]
Today,
the Intel®
Universal
Quick Connector (UQD) Interchangeability Alliance was officially established
. At the inaugural ceremony, Intel and its first certified partners—Invicta...[Details]
The drive shaft is the shaft in a universal joint that transmits power. As a high-speed, low-support rotating body, its dynamic balance is crucial. Generally, drive shafts undergo dynamic balancing...[Details]
Which is better, copper braided wire flexible connector or copper stranded wire flexible connector? When choosing copper wire flexible connector, people always struggle with whether to use copper b...[Details]
At the 2025 KeyBanc Investor Conference,
ON
Semiconductor CEO Hassane S. El-Khoury, framing global industrial transformation as the basis for
his strategic layout in two high-growth sect...[Details]
The assisted driving industry in 2025 stands at the dual crossroads of "large-scale implementation" and "safety upgrades." Cities like Beijing and Wuhan have already issued regulations de...[Details]