UM11067
TEA19363DB1484 60 W USB-PD demo board
Rev. 1 — 14 March 2018
User manual
Document information
Information
Keywords
Abstract
Content
TEA19363DB1484, TEA1936x, Universal Serial Bus (USB), power delivery,
USB-PD, type-C, AC-DC controller
This user manual describes the performance, technical data, and the
connections of the TEA19363DB1484 demo board.
The TEA19363DB1484 demo board operates at mains voltages from 90
V (AC) up to 264 V (AC) with an output voltage from 5 V (DC) up to 20 V (DC)
NXP Semiconductors
TEA19363DB1484 60 W USB-PD demo board
Revision history
Rev
v.1
Date
20180314
Description
first issue
UM11067
UM11067
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 14 March 2018
2 / 22
NXP Semiconductors
TEA19363DB1484 60 W USB-PD demo board
UM11067
1
Introduction
The non-insulated high voltages that are present when operating this product,
constitute a risk of electric shock, personal injury, death and/or ignition of fire.
This product is intended for evaluation purposes only. It shall be operated in a
designated test area by personnel qualified according to local requirements and
labor laws to work with non-insulated mains voltages and high-voltage circuits. This
product shall never be operated unattended.
Warning
This user manual describes the operation of the TEA19363DB1484 demo board featuring
the quasi-resonant controller TEA19361, the synchronous rectifier controller TEA1993,
the USB-PD Type-C, and QC2.0/3.0 controller TEA19032B.
The TEA19363DB1484demo board is designed for delivering a maximum output power
of 60 W at a maximum current of 3 A. Output voltages can be chosen from 5 V up to
20 V.
The TEA19363DB1484 provides an effective solution with a low output current ripple and
high efficiency for USB-PD and Quick Charge applications.
-
+
VBus
TEA1936x
QR CONTROLLER
SR CONTROLLER
TEA1993
USB
TYPE-C
PLUG
TEA19032B
OPTO/COMMS
USB-PD TYPE-C
AND
CONTROLLER FOR SMPS
CC1
CC2
GND
aaa-028835
Figure 1. Principle schematic
UM11067
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 14 March 2018
3 / 22
NXP Semiconductors
TEA19363DB1484 60 W USB-PD demo board
UM11067
1.1 Key features
•
•
•
•
•
•
•
•
Protocol support for USB-PD 2.0
Functionality user configurable end of line
Best-in-class energy efficiency meeting all DOE & EU CoC requirements
< 30 mW no-load power, low audible noise, low output voltage ripple
Small size due to high near-full digital integration level and > tbd W/CI power density
Best in class Thermal management
Safe solution with extensive set of hardware-integrated protection features
Complete one-stop-shop solution from NXP minimizing development time and R&D
cost
1.2 Applications
Mobile chargers with Type-C cable for:
•
Tablets
•
Notebooks
The new smart charger platform of NXP Semiconductors helps designers of travel
adapters to maximize power output for the smallest form-factor with the lowest bill of
materials.
The result is a cost-effective design that meets the requirements published by Energy
Star, the Department of Energy (DoE) in the United States, the Ecodesign Directive of
the European Union, the European Code of Conduct, and other guidelines.
Supporting hardware (UTC) and software (TEO-II) for USB-PD are available for jump-
starting application.
2
Safety warning
The demo board is connected to the mains voltage. Avoid touching the board while it
is connected to the mains voltage and when it is in operation. When the demo board is
used in uncontrolled, non-laboratory environments, an isolated housing is obligatory.
Galvanic isolation from the mains phase using a fixed or variable transformer is always
recommended.
Figure 2
shows the symbols on how to recognize these devices.
019aab173
019aab174
a. Isolated
Figure 2. Isolation symbols
b. Not isolated
UM11067
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 14 March 2018
4 / 22
NXP Semiconductors
TEA19363DB1484 60 W USB-PD demo board
UM11067
3
Specifications
Table 1. TEA19363DB1484 specifications
When operating at 230 V (AC)
Symbol
V
mains
P
out(max)
f
mains
P
idle
η
V
out
I
out(max)
V
O(ripple)burst
V
O(ripple()ull
EMI
C
CMN
ESD
Parameter
AC mains voltage
maximum output power
mains frequency
No-load input power
efficiency
output voltage
maximum output current
output voltage ripple in burst mode
output voltage ripple at continuous
switching
Conductive EMI
common-mode noise
ElectroStatic Discharge
Value
90 V (AC) up to 264 V (AC)
60 W
50 Hz to 60 Hz
< 30 mW
> 92 % at P
out(max)
5 V (DC) to 20 V (DC)
3A
100 mV
pp
at cable end
80 mV
pp
at cable end
−3 dB
< 2 V
pp
+5/−5 kV through air
+8/−8 kV via contact
UM11067
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 14 March 2018
5 / 22
京公网安备 11010802033920号
EEWORLD
