UM11058
TEA1936xDB1463 45 W USB-PD and Quick Charge demo
board
Rev. 1 — 5 February 2018
User manual
Document information
Information
Keywords
Abstract
Content
TEA1936xDB1463, TEA1936x universal serial bus, power delivery, USB-PD,
quick charge USB-PD 2.0 and 3.0, type-C
This user manual describes the performance, technical data, and the
connections of the TEA1936xDB1463 demo board. The TEA1936xDB1463
demo board operates at mains voltages from 90 V (AC) up to 264 V (AC) with
an output voltage from 5 V (DC) up to 20 V (DC).
NXP Semiconductors
TEA1936xDB1463 45 W USB-PD and Quick Charge demo board
Revision history
Rev
v.1
Date
20180205
Description
first issue
UM11058
UM11058
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 5 February 2018
2 / 22
NXP Semiconductors
TEA1936xDB1463 45 W USB-PD and Quick Charge demo board
UM11058
1
Introduction
The non-insulated high voltages that are present when operating this product,
constitute a risk of electric shock, personal injury, death and/or ignition of fire.
This product is intended for evaluation purposes only. It shall be operated in a
designated test area by personnel qualified according to local requirements and
labor laws to work with non-insulated mains voltages and high-voltage circuits. This
product shall never be operated unattended.
Warning
This user manual describes the operation of the TEA1936xDB1463 demo board. The
TEA1936xDB1463 features the quasi-resonant controller TEA19361, the synchronous
rectifier controller TEA1993, and the USB-PD Type-C and QC2.0/3.0 controller
TEA19051B.
The TEA1936xDB1463 demo board is designed for delivering a maximum output power
of 45 W at a maximum current of 3 A. Output voltages can be chosen from 5 V up to
20 V.
The TEA1936xDB1463 provides an effective solution with a low current ripple and high
efficiency for USB-PD and quick charge applications.
-
+
VBus
TEA19361
QR CONTROLLER
SR CONTROLLER
TEA1993
USB
TYPE-C
PLUG
TEA19051B
OPTO/COMMS
USB-PD TYPE-C
AND
QUICK CHARGE
CONTROLLER FOR SMPS
DP
DM
CC1
CC2
GND
aaa-027401
Figure 1. TEA1936xDB1463 principle schematic
UM11058
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 5 February 2018
3 / 22
NXP Semiconductors
TEA1936xDB1463 45 W USB-PD and Quick Charge demo board
UM11058
1.1 Key features
•
•
•
•
•
•
•
•
Multi-protocol support for USB-PD 2.0 and 3.0, Quick Charge 2.0 and 3.0
Functionality user-configurable end of line
Best-in-class energy efficiency meeting all DOE & EU CoC requirements
< 30 mW no-load power, low audible noise, low output voltage ripple
Small size due to high near-full digital integration level and > 15.9 W/CI power density
Best-in-class Thermal management
Safe solution with extensive set of hardware-integrated protection features
Complete one-stop-shop solution from NXP Semiconductors minimizing development
time and research and development cost
1.2 Applications
Mobile chargers with Type-C connector for:
•
•
•
•
Mobile phones
Smart phones
Tablets
Notebooks
The new smart charger platform of NXP Semiconductors helps designers of travel
adapters to maximize power output for the smallest form-factor with a short bill of
materials.
The result is a cost-effective design. It meets the requirements published by Energy Star,
the Department of Energy (DoE) in the United States, the Ecodesign Directive of the
European Union, the European Code of Conduct, and other guidelines.
Supporting hardware (UTC) and software (GUI) for USB-PD available for jump-starting
application.
UM11058
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 5 February 2018
4 / 22
NXP Semiconductors
TEA1936xDB1463 45 W USB-PD and Quick Charge demo board
UM11058
2
Safety warning
The TEA1936xDB1463 demo board is connected to the mains voltage. Avoid touching
the board while it is connected to the mains voltage and when it is in operation. An
isolated housing is obligatory when used in uncontrolled, non-laboratory environments.
Galvanic isolation from the mains phase using a fixed or variable transformer is always
recommended.
Figure 2
shows the symbols on how to recognize these devices.
019aab173
019aab174
a. Isolated
Figure 2. Isolation symbols
b. Not isolated
3
Specifications
Table 1. TEA1936xDB1486 specifications
Symbol
V
mains
P
out(max)
f
mains
P
idle
η
V
out
I
out(max)
V
ripple(burst)
V
ripple(full)
EMI
CMN
ESD
Parameter
AC mains voltage
maximum output power
mains frequency
no-load input power
efficiency
output voltage
maximum output current
output voltage ripple in burst mode
output voltage ripple at continuous
switching
conducted EMI
common-mode noise
electrostatic discharge
Value
90 V (AC) up to 264 V (AC)
45 W
47 Hz to 63 Hz
< 30 mW
> 92 %; at P
out(max)
5 V (DC) to 20 V (DC)
3A
100 mV (p-p); at cable end
80 mV (p-p); at cable end
−7 dB
< 2 V (p-p)
±15 kV; through air
±8 kV; via contact
UM11058
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1 — 5 February 2018
5 / 22
京公网安备 11010802033920号
EEWORLD
