X-60P Series – Industrial 2.5" SATA Solid State Drive
Product Summary
Capacities: 60 GBytes, 120 GBytes, 240 GBytes, 480 GBytes, 960 GBytes
Form Factor: 2.5" SATA Solid State Drive (70 mm x 100 mm x 7 mm)
Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible)
Command Sets: Supports ATA/ATAPI-8 and ACS-2
Performance
*
:
o
Read Performance: Sequential Read up to 520 MBytes/s, Random Read IOPs up to 75,000
o
Write Performance: Sequential Write up to 450 MBytes/s, Random Write IOPs up to 75,000
Operating Temperature Range
†
:
o
Commercial: 0 °C to 70 °C
o
Industrial: -40 °C to 85 °C
Storage Temperature Range: -40 °C to 85 °C
Operating Voltage: 5 V ± 10% and 3.3 V ± 5%
Data Retention: 10 Years @ Life Begin; 1 Year @ Life End
Endurance in TeraBytes Written (TBW) Max Capacity
‡
: Client > 1825; Embedded > 560; Enterprise > 280
Shock/Vibration: 1,500
g
/20
g
(MIL-STD810)
Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page
Mean Time Between Failure: > 2,000,000 hours
Data Reliability: < 1 non-recoverable error per 10
16
bits read
Product Features
Best-in-Class Performance and Endurance with
durabit™
Technology
Dynamic and Static Wear Leveling
Active and Passive Data Care Management
Lifetime Enhancements
o
Dynamic Bad Block Remapping
o
Write Amplification Reduction
On-Board Power Fail Protection
AHCI, TRIM, and NCQ Support
ATA Security Feature Set Support
PFAIL circuitry for data loss protection
In-Field Firmware Update
Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
AES256 Encryption (on request)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)
Why Swissbit?
Swissbit is focused on the design, development, manufacture, and support of leading edge memory and
storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and
addressees the higher level of application requirements of today’s industrial, Netcom, and automotive
customers by providing best-in-class products and services, with uncompromised attention to driving
overall value and quality.
*
Performance values are for the 480 GByte device. Values for the 960 GByte device are to be determined.
Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified
maximum operating temperature.
‡
According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the
specified TBW. The values listed are estimates and are subject to change without notice.
†
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
Revision: 0.04
www.swissbit.com
induistrial@swissbit.com
X-60P_fact_sheet_Rev04.docx
Page 2 of 2
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
