IN
D
1
-Q
17
0-
Q10 series
Ø10 mm panel mount LED indicators
DISTINCTIVE FEATURES
5 mm flush diffused LED, standard, hyper bright or water clear
Flush chamfered bezel style
(200 mm long) wire terminations
ENVIRONMENTAL SPECIFICATIONS
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range: -40 °C to +85° C ( -40 °F to
+185 °F)
GENERAL SPECIFICATIONS
• Max Reverse Voltage: 5 V
• Viewing Angle: 60° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 20 to 25 cNm (dependent on option)
• Maximum panel thickness 7 mm
MATERIALS
• Stainless Steel 316L or Anodized Aluminium with potted rear end
MOUNTING
12,00 0,472
A/F
2,30 0,091
10,00+0,15/-0,1
[0.393+0.006/-0]
The company reserves the right to change specifications without notice.
All LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and
1
LED INDICATORS
10
LED INDICATORS
Q10 series
Ø10 mm panel mount LED indicators
ELECTRICAL SPECIFICATIONS
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Blue
White
Orange
Bi-color (Typical)
(Red/Green)
Tri-color (Typical)
(Red/Green/Yellow)
80 mcd
60 mcd
50 mcd
1,600 mcd
1,600 mcd
60 mcd
14/30 mcd
60/15/13 mcd
Flush
8 mcd
6 mcd
6 mcd
50 mcd
500 mcd
110 mcd
15/10 mcd
15/10/6 mcd
Forward Voltage
2.0 V
2.2 V
2.1 V
3.3V
3.3 V
2.2 V
2.0 V/2.2 V
2.0 V/2.2 V/2.1 V
Voltage
Operating Voltage
(Min to Max)
Operating Current
(Typical All Types)
02 (No Resistor)
6 VDC
12 VDC
24 VDC
28 VDC
1.8 to 3.3 VDC
5.4 to 6.6 VDC
10.8 to 13.2 VDC
21.6 to 26.4 VDC
25.2 to 30.8 VDC
20 mA max*
20 mA
20 mA
20 mA
20 mA
* Customer to supply resistor for desired operating
current.
ADDITIONNAL INFORMATION ON LED COMPONENTS
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
•
Bi-color
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Blue
White
Orange
5,000 mcd
10,000 mcd
4,000 mcd
2,200mcd
2,500 mcd
4,000 mcd
Flush
1,300 mcd
1,200 mcd
350 mcd
280 mcd
950 mcd
500 mcd
Forward Voltage
2.2 V
3.3 V
2.0 V
3.3 V
3.3 V
2.2 V
leds, by connecting the gold solder lug
(+) one color is produced, by reversing the supply
voltage another color is produced – Bi-colors
are available up to 28 VDC. [AC products not
available]
•
The
tri-color led has red and green leds when
both are connected yellow is produced
HYPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Orange
6,000 mcd
1,900 mcd
1,600 mcd
2,400 mcd
Flush
980 mcd
300 mcd
250 mcd
110 mcd
Forward Voltage
2.2 V
3.3 V
2.0 V
2.2 V
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
Q10 series
Ø10 mm panel mount LED indicators
BUILD YOUR PART NUMBER
Q
SERIES
MOUNTING HOLE
BEZEL STYLE
TERMINALS
BEZEL FINISH
Metal
10
Ø10 mm
F
Flush
5
Rear epoxy Wires
S
AR
AG
AY
AB
Stainless Steel
Anodized Flush
Red
Green
Yellow
Blue
AN
AK
AC
Black
Dark olive
Grey
TYPE OF ILLUMINATION
LED COLOR
VOLTAGE
SEALING
XX
KK
YY
ZZ
Fixed Light
Flashing Light
(12 V – 28 VDC)
Bi-color
Tri-color
R
G
Y
B
W
O
HR
HG
HY
HO
Red
Green
Yellow
Blue
White
Orange
Hyper Bright Red
Hyper Bright
Green
Hyper Bright
Yellow
Hyper Bright
Orange
SR
SG
SY
SB
SW
SO
RG
RY
GY
RYG
Super Bright Red
Super Bright
Green
Super Bright
Yellow
Super Bright Blue
Super Bright White
Super Bright
Orange
Red/Green
Red/Yellow
Green/Yellow
Red/Yellow/Green
02
06
12
12A
24
24A
28
28A
no resistor*
6V DC
12 VDC
12 VAC/DC
24 VDC
24 VAC/DC
28 VDC
28 VAC/DC
(Blank)
E
Unsealed
IP67
* please refer to the
forward voltage in
electrical specifications
ABOUT THIS SERIES
Notice:
please note that not all combinations of above numbers are available.
• Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths
consult APEM.
• For LEDs with alternative voltages consult APEM
• Standard Tri-color wire terminations are two Anodes (+) and one Cathode (-)
• Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
3
LED INDICATORS
LED INDICATORS
Q10 series
Ø10 mm panel mount LED indicators
FLUSH BEZEL
REAR EPOXY WIRES
4
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem
:
Q10F5SXXSR24E Q10F5SXXSR12E Q10F5SXXW02E Q10F5SXXSB24E Q10F5SXXSB02E Q10F5SXXSY24E
Q10F5SXXSG24E Q10F5SXXSG12E Q10F5SXXHR24E Q10F5SXXSY02E Q10F5SXXSR02E Q10F5SXXHR12E
Q10F5SXXSB12E Q10F5SXXHY12E Q10F5SXXHY24E Q10F5SXXHY02E Q10F5SXXW24E Q10F5SXXW12E
Q10F5SXXHG02E Q10F5SXXHG24E Q10F5SXXSW12E Q10F5SXXSG02E Q10F5SXXSW02E Q10F5SXXHR02E
Q10F5SXXSW24E Q10F5SXXHG12E Q10F5SXXSY12E
京公网安备 11010802033920号
EEWORLD
