is designed for mass termination to metric connectors
•
Stranded wire provides flexibility and extended
product life
•
Zippable for branching or discrete termination
•
See Regulatory Information Appendix (RIA) for
chemical compliance information
(RIA E1 & C1 apply)
Date Modified: May 13, 2009
TS-0452-B
Sheet 1 of 2
Physical
Insulation:
Material: Polyvinyl Chloride (PVC)
Color: Gray
Marking:
Standard: None
Canadian Option:
AWM 2651 105C 300V VW1 3M NU C
AWM IA 105C 300V FT1 EU <50V
Conductors:
28 AWG, 7
×
36 AWG [ 7
×
Ø 0.127 ] Tinned Stranded Copper
Electrical
Voltage Rating:
USA: 300V
Canada: 300V
Insulation Resistance:
(Primary Cable) > 1 × 10
10
Ω/10
ft. [ 3 m ]
Characteristic Impedance:
Unbalanced
Balanced
89
Ω
146
Ω
32.2 pF/m [ 9.8 pF/ft ]
0.68 μH/m [ 0.21 μH/ft ]
4.69 ns/m [ 1.43 ns/ft ]
71%
EU: <50V
Capacitance:
Inductance:
Propagation Delay:
Velocity of Propagation:
54.5 pF/m [ 16.6 pF/ft ]
0.43 μH/m [ 0.14 μH/ft ]
4.86 ns/m [ 1.48 ns/ft ]
69%
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair.
Environmental
Temperature Rating:
-20°C to +105°C
Canada: FT1
Flammability Rating:
USA: VW-1
UL File No.: E42769, Style No: 2651
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Round Conductor Flat Cable
1.0 mm 28 AWG Stranded, PVC
Number of
Conductors
06
08
10
12
3M Part
Number
3625/06
3625/08
3625/10
3625/12
Dimension A
8.00 ± 0.20 [ .315 ]
10.00 ± 0.20 [ .394 ]
12.00 ± 0.20 [ .472 ]
6.00 ± 0.20 [ .236 ]
3625 Series
Dimension B
7.00 ± 0.18 [ .276 ]
9.00 ± 0.18 [ .354 ]
11.00 ± 0.18 [ .433 ]
5.00 ± 0.18 [ .197 ]
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
3625/14
3625/16
3625/18
3625/20
3625/22
3625/24
3625/26
3625/28
3625/30
3625/32
3625/34
3625/36
3625/38
3625/40
3625/42
3625/44
3625/46
3625/48
3625/50
A
B
C
(OPTIONAL)
mm
[inch]
Tolerance Unless Noted
.0
Inch
±.3
.00
±.13
.000
[ ] Dimensions for Reference Only
20.00 ± 0.22 [ .787 ]
22.00 ± 0.22 [ .866 ]
24.00 ± 0.22 [ .945 ]
26.00 ± 0.22 [ 1.024 ]
28.00 ± 0.22 [ 1.102 ]
30.00 ± 0.25 [ 1.181 ]
32.00 ± 0.25 [ 1.260 ]
34.00 ± 0.25 [ 1.339 ]
36.00 ± 0.25 [ 1.417 ]
38.00 ± 0.25 [ 1.496 ]
40.00 ± 0.25 [ 1.575 ]
42.00 ± 0.25 [ 1.654 ]
44.00 ± 0.25 [ 1.732 ]
46.00 ± 0.25 [ 1.811 ]
48.00 ± 0.25 [ 1.890 ]
50.00 ± 0.25 [ 1.969 ]
14.00 ± 0.20 [ .551 ]
16.00 ± 0.22 [ .630 ]
18.00 ± 0.22 [ .709 ]
19.00 ± 0.20 [ .748 ]
21.00 ± 0.20 [ .827 ]
23.00 ± 0.20 [ .906 ]
25.00 ± 0.20 [ .984 ]
27.00 ± 0.20 [ 1.063 ]
29.00 ± 0.23 [ 1.142 ]
31.00 ± 0.23 [ 1.220 ]
33.00 ± 0.23 [ 1.299 ]
35.00 ± 0.23 [ 1.378 ]
37.00 ± 0.23 [ 1.457 ]
39.00 ± 0.23 [ 1.535 ]
41.00 ± 0.23 [ 1.614 ]
43.00 ± 0.23 [ 1.693 ]
45.00 ± 0.23 [ 1.772 ]
47.00 ± 0.23 [ 1.850 ]
49.00 ± 0.23 [ 1.929 ]
13.00 ± 0.18 [ .512 ]
15.00 ± 0.20 [ .591 ]
17.00 ± 0.20 [ .669 ]
0.89
±
0.08
[ .035 ]
0.50
±
0.15
[ .020 ]
1.00
±
0.05
[ .039 ]
PVC Insulation
Note: Red marking on one edge of cable designates wire #1.
28 AWG 7 × 36 AWG [ 7 ×
ø
0.127 ] Tinned
Stranded Copper Conductors
Ordering Information
3625 / XX XX
Blank = Standard
C = Canadian Certified Version
Blank = Standard
SF = Splice Free
Number of Conductors
(See Table)
Note: Available in standard 30 m or 100 m rolls, please
specify when ordering. Contact 3M for availability of
additional conductor counts and/or custom roll lengths.
TS-0452-B
Sheet 2 of 2
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part
does not
contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
Serial communication is a very common communication method, with a small number of cables and simple operation. Let's take a look at the definition, principle and code implementation of serial communi...
During the NBoot startup process, it is necessary to access the contents of block1 in NandFlash. The contents of block1 are the TOC of EBoot to be loaded next. How is the TOC of EBoot burned into nand...
If any of you have implemented the encryption protocols WEP WPA WAPI 802.11i for wireless network cards, please leave your contact information and ask for technical advice. Or add me on QQ: 610258988....
[i=s]This post was last edited by btty038 on 2019-12-19 14:16[/i]Since the birth of the first radio transmitter, engineers have been concerned about RF power measurement, and it is still a hot topic t...
Dear experts: I am a newbie. I was assigned to work on WinCE, mainly the underlying driver. I tried to write a stream interface driver. I set almost all the stream interface functions to empty functio...
stm32l_discovery Because the LCD screen is fixed on the board, and there is no specific circuit diagram of the LCD connecting to the board. Now I don't want to use its built-in screen, I want to use a...
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
The above is to use MB1404 as a stereo composite signal transmitter. You can use the internal high-frequency amplifier and oscillator or not! According to my experience, I still recommend beginners...[Details]
Cars equipped with xenon headlights are already common on the road. Whether they are standard equipment on high-end cars or embellishments on modified cars, xenon lamps are gradually becoming a sym...[Details]
With the explosive growth of electronic functions in cars, will more and more luxurious cars endanger the safety of passengers? This is the origin of the problem of over-electrification of cars. What ...[Details]
Introduction
In the wastewater discharged from steel plants, the water contains a large amount of waste slag and oil. If the waste slag and oil are separated from the water, the water can be us...[Details]
At present, products in the field of monitoring generally focus on the field level, that is, the client/server (C/S) model is adopted, the purpose of which is to ensure the stability and reliability o...[Details]
The NCL30051 from On Semi is a peak current controlled fixed off time buck controller designed for LED driver applications. It has adjustable off time, 250mA source/500mA sink peak drive capability, ±...[Details]
The single-chip automatic alarm device composed of MODEM chip can transmit alarm information over long distances with the help of the telephone exchange network within factories and enterprises, or...[Details]
1. Overview
In the configuration of the automation system, we must ensure that the system is advanced, reliable and reasonable, and avoid redundant functions and reduce investment costs. From 2...[Details]
The physical interference of dc/dc switching power converters is well known unless the system and circuit diagram are carefully designed. These converters can inject unwanted charge into the electr...[Details]