10 to 55 Hz (at double amplitude of 1.0 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1 ×10
6
ope. (at 180 times/min.)
Ambient temperature: -40 to +55°C (When coil holding voltage is 40 to 100% V of rated voltage.)
-40 to +85°C (When coil holding voltage is 50 to 60% V of rated voltage or storage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 115 g
Expected switching life
Conditions
Unit weight
Condition for use,
transportation and
storage
*4
*1.This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2.Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981.
*3.Coil holding voltage is the coil voltage after 100 ms following application of the rated coil voltage.
*4.The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to "1. Usage, transport and storage conditions" in NOTES.
Expected electrical life
Conditions:Resistive load
Type
Switching capacity
120 A 480 V AC
1 Form A
55 A 800 V AC
Number of operations
Min. 1,000 ope.
(at 85°C, ON:OFF = 1 s:9 s)
Min.10,000 ope.
(at 85°C, ON:OFF = 1 s:9 s)
Panasonic Corporation Electromechanical Control Business Division
Gas water heater control circuit Gas water heater is a commonly used small household appliance. The control circuits of various brands are similar. The "Guanghui" gas water heater circuit in the attac...
Without leaving home, you can listen to the latest industry technologies and trends. Industry leaders such as Micron and AMD share their views and solutions on data centers.Today, the challenges facin...
[i=s] This post was last edited by jj1989 on 2018-11-29 19:43 [/i] [size=4][md]## Preface I have been following this board for a long time, and now I have it ready for evaluation. As Nordic's most adv...