10 to 55 Hz at double amplitude of 1.5 mm (detection time: 10μs) (Only the NC contact of 1 Form C is 0.82mm)
10 to 55 Hz at double amplitude of 1.5 mm
Min. 1×10
6
(at 180 times/min.)
Ambient temperature: –40 to +85°C
–40 to +185°F
(Class B insulation), –40 to +105°C
–40 to +221°F
(Class F
insulation),
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 11 g
.39 oz
Specifications
Notes: *1.This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of
±1.2×50μs
according to JEC-212-1981
*3. For the ambient temperature, please refer to Usage, transport and storage conditions in NOTES.
*Please note that some of the specifications listed above may not comply with overseas standards.
3. Expected electrical life
Condition: Resistive, at 20°C
68°F
Type
1 Form A
NO contact
1 Form C
NC contact
For the operating ambient temperature, please read the notes
16A 250V AC
Switching capacity
16A 250V AC
16A 250V AC
Number of operations
Min. 1×10
5
(ON:OFF = 1.5s:1.5s)
Min. 5×10
4
(ON:OFF = 1.5s:1.5s)
Min. 1×10
4
(ON:OFF = 1.5s:1.5s)
–2–
ASCTB395E 201809-T
LZ-N (ALZN)
REFERENCE DATA
1. Max. switching capacity (AC resistive load)
2. Coil temperature rise (Ave.)
Tested sample: ALZN1F12, 6pcs.
Contact current: 16A
Ambient temperature: Normal temperature • 85°C
185°F
• 105°C
221°F
Measured portion: inside the coil
100
50
30
20
10
5
65
Normal temperature 16A
Coil applied voltage, %V
60
Temperature rise,
°C
55
50
45
40
35
30
50
25
0
30
100
500 1,000
Contact voltage, V
20
95 100 105 110 115 120 125 130 135
Coil applied voltage, %V
0
0
85°C 16A
105°C 16A
3. Ambient temperature characteristics (Ave.)
Tested sample: ALZN1F12, 6pcs.
Contact carrying current: 0A, 16A
Measured portion: inside the coil
300
250
16A 155°C
Contact current, A
200
150
100
16A 130°C
Operate voltage
(Hot start: 16A, 100%V)
1
0.5
Operate voltage
(Cold start: Coil and contact no carrying current)
20
40
60
80
100
Ambient temperature,
°C
120
DIMENSIONS
(mm
inch)
1. 1 Form A type
The CAD data of the products with a “CAD” mark can be downloaded from our Website.
I don’t know why, but such a serious epidemic suddenly happened in 2020, and I predict that it will continue in the next few years.The disaster of 2020 has undoubtedly dealt a heavy blow to everyone. ...
[align=left]For many people, low-frequency magnetic field interference is the most difficult interference to deal with. This interference is generated by direct current or alternating current. For exa...
Abstract: The dual closed-loop decoupling control principle of voltage-source PWM rectifier is analyzed. In view of the fact that grid disturbance and load disturbance have a great influence on the dy...
I have loved electronics since I was a child. When I grew up, I started to study electronics and now I work in the electronics industry. Cultivating interests is the most important thing. Cultivating ...
I'm begging for the e-book "Software Development for Memory-Constrained Systems"~~~ I don't want the English version, I want the Chinese version, preferably the simplified Chinese version. Can anyone ...
This game has a bug. There is no inductor in the first puzzle. So basically you can only rely on luck to get it right. Haha, let's talk about Easy Power Supply. This kind of voltage regulator with ind...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
A multi-point temperature control heating control system was designed using the SST89E564RC single-chip microcomputer and a new temperature measuring device. The heating system can be controlled in...[Details]
my country is a big country in agriculture, grain production and consumption. Grains are a necessary condition for our nation to survive and develop. The flour processing industry will exist forever w...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
