PRODUCT SUMMARY
SKY13626-685LF: 0.4 to 3.8 GHz SP4T Switch
Applications
Cellular systems
3G/4G LTE systems
Pre- and post-PA switching
RF1
RF2
Features
Broadband frequency range: 0.4 to 3.8 GHz
Low insertion loss
High isolation
Integrated GPIO interface
No DC blocking capacitors required
Lead (Pb)-free and RoHS-compliant
Small-size QFN (9-pin, 1.1
1.1
0.5 mm) package
(MSL1, 260
C
per JEDEC J-STD-020)
Skyworks Green
products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to
Skyworks
Definition of Green
TM
, document number
SQ04–0074.
TM
RFC
RF3
RF4
Logic and
Supply
203631C-001
VDD
VC1
VC2
Figure 1. SKY13626-685LF Block Diagram
Description
The SKY13626-685LF is a single-pole, four-throw (SP4T) switch.
No external DC blocking capacitors are required on the RF paths
as long as there is no DC voltage on the RF line. The switch can
operate over the temperature range of −40
C
to +90
C.
Switching is controlled by two CMOS/TTL compatible control
voltage inputs (VC1 and VC2). Depending on the logic voltage level
applied to the control pin, the RFC pin is connected to one of four
switched RF outputs (RF1, RF2, RF3, or RF4) by using a low
insertion loss path, while the path between the RFC pin and the
other RF pins is in isolation.
The SKY13626-685LF is provided in a small-size, 9-pin,
1.1
1.1
0.5 mm QFN package.
A functional block diagram is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
204180A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 19, 2016
1
PRODUCT SUMMARY • SKY13626-685LF: 0.4 TO 3.8 GHz SP4T SWITCH
Ordering Information
Model Name
SKY13626-685LF: SP4T Switch
Manufacturing Part Number
SKY13626-685LF
Evaluation Board Part Number
SKY13626-685LF-EVB
Copyright © 2016 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
August 19, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 204180A
PCB Design
京公网安备 11010802033920号
EEWORLD
