Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Jan. 2018
Multilayer NTC Thermistors (Automotive Grade)
Ratings
Size code (EIA)
Operating Temperature Range
Rated Maximum Power Dissipation
½1
Dissipation Factor
½2
0(0402)
–40 to 150 °C
66 mW
Approximately 2 mW/°C
100 mW
Approximately 3 mW/°C
1(0603)
½1
Rated Maximum Power Dissipation : The maximum power that can be continuously applied at the rated ambient temperature.
· The maximum value of power, and rated power is same under the condition of ambient temperature 25 °C or less. If the temperature exceeds
25 °C, rated power depends on the decreased power dissipation curve.
· Please see “Operating Power” for details.
½2
Dissipation factor : The constant amount power required to raise the temperature of the Thermistor 1 °C through self heat generation under stable temperatures.
· Dissipation factor is the reference value when mounted on a glass epoxy board (1.6 mmT).
Part Number List
●
0402(EIA)
Part Number
ERTJ0EG202GM
ERTJ0EG202HM
ERTJ0EG202JM
ERTJ0EG103□M
ERTJ0EP473□M
ERTJ0ER104□M
ERTJ0ET104□M
ERTJ0EV104□M
ERTJ0EV474□M
Nominal Resistance
at 25 °C
2 kΩ±2 %
2 kΩ±3 %
2 kΩ±5 %
10 kΩ
47 kΩ
100 kΩ
100 kΩ
100 kΩ
470 kΩ
B Value
at 25/50(K)
(3380 K)
(3380 K)
(3380 K)
3380 K±1 %
4050 K±1 %
4250 K±1 %
4485 K±1 %
4700 K±1 %
4700 K±1 %
B Value
at 25/85(K)
3410 K±0.5 %
3410 K±0.5 %
3410 K±0.5 %
3435 K±1 %
(4100 K)
(4300 K)
(4550 K)
(4750 K)
(4750 K)
●
0603(EIA)
Nominal Resistance
at 25 °C
ERTJ1VK102□M
1 kΩ
ERTJ1VG103□M
10 kΩ
ERTJ1VP473□M
47 kΩ
ERTJ1VR104□M
100 kΩ
ERTJ1VV104□M
100 kΩ
ERTJ1VT224□M
220 kΩ
Part Number
B Value
at 25/50(K)
3650 K±1 %
3380 K±1 %
4100 K±1 %
4200 K±1 %
4700 K±1 %
4485 K±1 %
B Value
at 25/85(K)
(3690 K)
3435 K±1 %
(4150 K)
(4250 K)
(4750 K)
(4550 K)
□
: Resistance Tolerance Code (F : ±1%, G : ±2%, H : ±3%, J : ±5%)
□
: Resistance Tolerance Code (F : ±1%, G : ±2%, H : ±3%, J : ±5%)
●
Temperature
B
B
25/85
T(°C)
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
25/50
and Resistance value (the resistance value at 25 °C is set to 1)/ Reference values
ERTJ1VK to
3650 K
(3690 K)
25.77
19.10
14.29
10.79
8.221
6.312
4.883
3.808
2.993
2.372
1.892
1.520
1.229
1
0.8185
0.6738
0.5576
0.4639
0.3879
0.3258
0.2749
0.2330
0.1984
0.1696
0.1456
0.1255
0.1087
0.09440
0.08229
0.07195
0.06311
0.05552
0.04899
0.04336
0.03849
0.03426
0.03058
0.02736
0.02454
ERTJ0EP to
4050 K
(4100 K)
33.10
24.03
17.63
13.06
9.761
7.362
5.599
4.291
3.312
2.574
2.013
1.584
1.255
1
0.8016
0.6461
0.5235
0.4266
0.3496
0.2881
0.2386
0.1985
0.1659
0.1393
0.1174
0.09937
0.08442
0.07200
0.06166
0.05306
0.04587
0.03979
0.03460
0.03013
0.02629
0.02298
0.02013
0.01767
0.01553
ERTJ1VP to
4100 K
(4150 K)
34.56
24.99
18.26
13.48
10.04
7.546
5.720
4.369
3.362
2.604
2.030
1.593
1.258
1
0.7994
0.6426
0.5194
0.4222
0.3451
0.2837
0.2344
0.1946
0.1623
0.1359
0.1143
0.09658
0.08189
0.06969
0.05957
0.05117
0.04415
0.03823
0.03319
0.02886
0.02513
0.02193
0.01918
0.01680
0.01476
ERTJ0ER to
4250 K
(4300 K)
42.40
29.96
21.42
15.50
11.33
8.370
6.244
4.699
3.565
2.725
2.098
1.627
1.271
1
0.7923
0.6318
0.5069
0.4090
0.3320
0.2709
0.2222
0.1831
0.1516
0.1261
0.1054
0.08843
0.07457
0.06316
0.05371
0.04585
0.03929
0.03378
0.02913
0.02519
0.02184
0.01898
0.01654
0.01445
0.01265
ERTJ1VR to
4200 K
(4250 K)
40.49
28.81
20.72
15.07
11.06
8.198
6.129
4.622
3.515
2.694
2.080
1.618
1.267
1
0.7944
0.6350
0.5108
0.4132
0.3363
0.2752
0.2263
0.1871
0.1554
0.1297
0.1087
0.09153
0.07738
0.06567
0.05596
0.04786
0.04108
0.03539
0.03059
0.02652
0.02307
0.02013
0.01762
0.01546
0.01361
ERTJ□□T to ERTJ□□V to
4485 K
4700 K
(4550 K)
(4750 K)
46.47
32.92
23.55
17.00
12.38
9.091
6.729
5.019
3.772
2.854
2.173
1.666
1.286
1
0.7829
0.6168
0.4888
0.3896
0.3123
0.2516
0.2037
0.1658
0.1357
0.1117
0.09236
0.07675
0.06404
0.05366
0.04518
0.03825
0.03255
0.02781
0.02382
0.02043
0.01755
0.01511
0.01304
0.01127
0.00976
59.76
41.10
28.61
20.14
14.33
10.31
7.482
5.481
4.050
3.015
2.262
1.710
1.303
1
0.7734
0.6023
0.4721
0.3723
0.2954
0.2356
0.1889
0.1523
0.1236
0.1009
0.08284
0.06834
0.05662
0.04712
0.03939
0.03308
0.02791
0.02364
0.02009
0.01712
0.01464
0.01256
0.01080
0.00931
0.00806
ERTJ□□G to
(3380 K)
3435 K
20.52
15.48
11.79
9.069
7.037
5.507
4.344
3.453
2.764
2.227
1.806
1.474
1.211
1
0.8309
0.6941
0.5828
0.4916
0.4165
0.3543
0.3027
0.2595
0.2233
0.1929
0.1672
0.1451
0.1261
0.1097
0.09563
0.08357
0.07317
0.06421
0.05650
0.04986
0.04413
0.03916
0.03483
0.03105
0.02774
B
25/50
=
k
n (R
25
/R
50
)
1/298.15–1/323.15
B
25/85
=
k
n (R
25
/R
85
)
1/298.15–1/358.15
R
25
=Resistance at 25.0±0.1 °C
R
50
=Resistance at 50.0±0.1 °C
R
85
=Resistance at 85.0±0.1 °C
Jan. 2018
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Multilayer NTC Thermistors (Automotive Grade)
Specification and Test Method
Item
Specification
Rated Zero-power Within the specified tolerance.
Resistance (R
25
)
B Value
Shown in each Individual Specification.
½
Individual Specification shall specify B
25/50
or
B
25/85
.
Test Method
The value is measured at a power that the influence
of self-heat generation can be negligible (0.1mW or
less), at the rated ambient temperature of 25.0±0.1°C.
The Zero-power resistances; R
1
and R
2
, shall be
measured respectively at T
1
(deg.C) and T
2
(deg.C).
The B value is calculated by the following equation.
B
T
1
/T
2
=
k
n (R
1
)–
k
n (R
2
)
1/(T
1
+273.15)–1/(T
2
+273.15)
T
1
25.0 ±0.1 °C
25.0 ±0.1 °C
T
2
50.0 ±0.1 °C
85.0 ±0.1 °C
B
25/50
B
25/85
Adhesion
The terminal electrode shall be free from peeling Applied force :
or signs of peeling.
Size 0402, 0603 : 5 N
Duration : 10 s
Size : 0402
1.0
0.5R
0.5
Test Sample
Board
Size : 0603
1.0
Test
Sample
Unit : mm
Bending Strength There shall be no cracks and other mechanical
damage.
R
25
change : within ±5 %
Bending distance : 2 mm
Bending speed : 1 mm/s
Bending
distance
Unit : mm
20
R340
45±2
45±2
Resistance to
Vibration
There shall be no cracks and other mechanical
damage.
R
25
change
:
B Value change :
within ±2 %
within ±1 %
Solder samples on a testing substrate, then
apply vibration to them.
Acceleration
:5G
Vibrational frequency : 10 to 2000 Hz
Sweep time
: 20 minutes
12 cycles in three directions,
which are perpendicular to each other
Solder samples on a testing substrate, then apply
impacts to them.
Pulse waveform
: Semisinusoidal wave, 11 ms
Impact acceleration : 50 G
Impact direction
: X-X', Y-Y', Z-Z' In 6 directions,
three times each
Resistance to
Impact
There shall be no cracks and other mechanical
damage.
R
25
change
:
B Value change :
within ±2 %
within ±1 %
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Jan. 2018
Multilayer NTC Thermistors (Automotive Grade)
Specification and Test Method
Item
Resistance to
Soldering Heat
Specification
There shall be no cracks and other mechanical
damage.
R
25
change
:
B Value change :
within ±2 %
within ±1 %
Test Method
Soldering bath method
Solder temperature : 260 ±5 °C, 270 ±5 °C
Dipping period
: 3.0 ±0.5 s, 10.0 ±0.5 s
Preheat condition :
Step
1
2
Temp (°C)
80 to 100
150 to 200
Period (s)
120 to 180
120 to 180
Solderability
More than 95 % of the soldered area of both
terminal electrodes shall be covered with fresh
solder.
R
25
change
:
B Value change :
within ±2 %
within ±1 %
Soldering bath method
Solder temperature : 230 ±5 °C
Dipping period
: 4 ±1 s
Solder
: Sn-3.0Ag-0.5Cu
Conditions of one cycle
Step 1 : –55±3 °C, 30±3 min.
Step 2 : Room temp., 3 min. max.
Step 3 : 125±5 °C, 30±3 min.
Step 4 : Room temp., 3 min. max.
Number of cycles: 2000 cycles
Temperature
: 85 ±2 °C
Relative humidity : 85 ±5 %
Test period
: 2000 +48/0 h
Temperature
: 85 ±2 °C
Relative humidity : 85 ±5 %
Applied power : 10 mW(D.C.)
Test period
: 2000 +48/0 h
Temperature
Test period
Temperature
Test period
Temperature
Test period
: –40 ±3 °C
: 2000 +48/0 h
: 125 ±3 °C
: 2000 +48/0 h
: 150 ±3 °C
: 1000 +48/0 h
Temperature
Cycling
Humidity
R
25
change
:
B Value change :
R
25
change
:
B Value change :
within ±2 %
within ±1 %
within ±2 %
within ±1 %
Biased Humidity
Low Temperature
Exposure
R
25
change
:
B Value change :
within ±2 %
within ±1 %
within ±2 %
within ±1 %
within ±3 %
within ±2 %
High Temperature R
25
change
:
Exposure 1
B Value change :
High Temperature R
25
change
:
Exposure 2
B Value change :
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Jan. 2018
Multilayer NTC Thermistors (Automotive Grade)
Dimensions in mm (not to scale)
L
W
(Unit : mm)
Size Code (EIA)
T
L
1.0±0.1
1.60±0.15
W
0.50±0.05
0.8±0.1
T
0.50±0.05
0.8±0.1
L
1
, L
2
0.25±0.15
0.3±0.2
0 (0402)
1 (0603)
L
1
L
2
Packaging Methods
●
Standard
Packing Quantities
Kind of Taping
Punched Carrier Taping
Pitch Quantity
(mm) (pcs./reel)
2
4
10,000
4,000
●
Reel
for Taping
W
1
E
C
D
W
2
A
B
Size
Code
0 (0402)
1 (0603)
Thickness
(mm)
0.5
0.8
●
Pitch
t
1
2 mm (Punched Carrier Taping) : Size 0402
Feeding hole
fD
0
Chip pocket
Symbol
E
F
W
A
B
fA
fB
+1.0
0
C
D
E
W
1
9.0
+1.0
0
W
2
11.4
±1.0
Dim.
(mm)
0
180
–3
60.0
13.0
±0.5
21.0
±0.8
2.0
±0.5
t
2
Chip component
P
1
P
2
P
0
Tape running direction
●
Leader
Symbol
A
B
W
F
E
P
1
P
2
P
0
fD
0
0
t
1
t
2
1.0
Part and Taped End
Leader part
Top cover tape
Dim. 0.62 1.12 8.0 3.50 1.75 2.00 2.00 4.0 1.5
+0.1
0.7
(mm)
±0.05 ±0.05 ±0.2 ±0.05 ±0.10 ±0.05 ±0.05 ±0.1
max. max.
●
Pitch
t
1
4 mm (Punched Carrier Taping) : Size 0603
Feeding hole
fD
0
A
B
Chip pocket
100 min.
Vacant position
400 min.
F
W
E
Taped end
t
2
Symbol
(mm)
Chip component
P
1
P
2
P
0
Tape running direction
160 min.
Vacant position
(Unit : mm)
A
±0.1
B
±0.1
W
F
E
P
1
P
2
P
0
fD
0
0
t
1
t
2
1.4
Dim. 1.0
1.8 8.0 3.50 1.75 4.0 2.00 4.0 1.5
+0.1
1.1
±0.2 ±0.05 ±0.10 ±0.1 ±0.05 ±0.1
max. max.
Minimum Quantity / Packing Unit
Part Number (Size)
ERTJ0
(0402)
ERTJ1
(0603)
Minimum Quantity/ Packing
Unit
10,000
4,000
Packing Quantity
in Carton
200,000
80,000
Carton
L×W×H (mm)
250×200×200
250×200×200
Part No., quantity and country of origin are designated on outer packages in English.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
I am working on MMS software for mobile phones. The problem of MMS packaging and sending has been solved. Now I can't solve the problem of MMS reception. The MMS center sends a text message with the U...
[i=s]This post was last edited by 5525 on 2016-5-19 22:46[/i] Airbags: If done well, they can save lives. If not done well, they can lead to car recalls, and the automakers will lose hundreds of milli...
The low equipment placement rate is a problem that must be faced after many years of factory establishment. How to improve and maintain it? This is something that every manager must face. Here are som...
Question: I saw Local ROM NOR Flash in a book. Question 1: Is Local ROM equivalent to the computer's memory stick? Is NOR Flash equivalent to the computer's hard disk? Question 1: What is Local ROM? A...
Crotex A8 kernel linux4.1.18
Using RS232 serial communication, the microcontroller sends 9 data bits, the highest bit 1 represents the address, and the highest bit 0 represents the data
The A8 core bo...
1. Introduction
RFID (radio frequency identification) is a non-contact automatic identification technology that emerged in the 1990s. It uses the characteristics of radio frequency signal prop...[Details]
0 Introduction
With the development of my country's economy, the number of motor vehicles continues to increase. The growth of existing roads and other hardware facilities can no longer meet t...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
Electronic systems are located at different points on the automotive power bus and therefore often need to operate under very stringent power requirements. These include load dump, cold crank, very lo...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
1. Introduction
Testing the temperature of steel billets before rolling is an important measure to ensure the quality of steel. Traditional manual testing is difficult to ensure product qu...[Details]
On the afternoon of July 10, Beijing time, Taiwan's largest chip designer MediaTek expects its smartphone chip shipments to grow by double digits in the third quarter of this year, and the company is ...[Details]
Capacitors
are basic components in various electronic devices and are widely used for bypassing, coupling,
filtering
, tuning, etc. in electronic circuits. However, to use capacitors,...[Details]
Motors are important products that convert electrical energy into mechanical energy to achieve automation, and they are widely used in industrial control, medical electronics, white a...[Details]
Only a small number of LED manufacturers can produce high-quality LEDs. For applications that are only used for simple indication, low-quality LEDs are sufficient. However, high-quality LEDs must...[Details]
Introduction
Nowadays, people pay more and more attention to the security alarm system, and people have higher and higher requirements for the functions and performance of the alarm. This paper prop...[Details]
1. Introduction
With the increasing popularity of fully automatic washing machines, consumers have higher and higher requirements for their environmenta...[Details]
Key Points
1. Now, in addition to high-end smartphones and tablets, users also expect to use touch screens in other applications, and they are gradually appearing in cars and instruments.
...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
1 Introduction to LED
With the development of science and technology, people have higher and higher requirements on automobile light sources. LED (Light Emitting Diode) has gradually attracted...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
