EEWORLDEEWORLDEEWORLD

Part Number

Search

PM529

Description
1-OUTPUT 2.5 W AC-DC REG PWR SUPPLY MODULE
Categoryaccessories   
File Size59KB,3 Pages
ManufacturerArtesyn
Websitehttp://www.artesyn.com
Download Datasheet View All

PM529 Overview

1-OUTPUT 2.5 W AC-DC REG PWR SUPPLY MODULE

PM529 Preview

PM500 and VM500 SERIES
Single, dual and triple output
Recommended for new design-ins
OVP on 5V outputs
Split bobbin wound
PCB mounting
UL and CSA approved
115, 220 and 240VAC input
Short circuit protection
The VM500 Series has EN60950 approval
[ 2 YEAR WARRANTY ]
VM500 Series only
These encapsulated, PC-mountable linear power modules feature 23 single
output, 14 dual output and 13 triple output models for a wide variety of printed
circuit board applications. The 5V output of all models have overvoltage
crowbar protection as a standard feature. For maximum safety, all power
transformers are split bobbin wound, rather than layer wound, to give total
isolation with low coupling capacitance between primary and secondary.
Conservative design and rating of these modules results in reliable operation
and long life. Standard input voltage is 115VAC; other optional inputs are 220
and 240VAC. Most models are available in standard and alternate pin
configurations for second sourcing applications. This series includes 5 sub-
miniature modules for lower power applications where minimum circuit board
space is available.
SPECIFICATION
OUTPUT SPECIFICATIONS
Voltage accuracy
Voltage adjustability
Line regulation
Load regulation
Temperature coefficient
Overvoltage protection
Output power limit
Short circuit protection
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
GENERAL SPECIFICATIONS
±1.0% max.
Efficiency
Isolation voltage
PM series, no suffix
PM series, suffix D
PM series, suffix K
VM534D
40% typical
700VAC
2500VAC
2500VAC
3000VAC
Linear
Safety VM534D
IEC950
Safety PM5xx CSA22.2-143/-154, UL478
Non-conductive
black plastic
Case
Case
Case
Case
Case
A
181g (6.4oz)
B1 (incl. VM534D)
340g (12oz)
B2
408g (14.4oz)
B3
635g (22.4oz)
H
227g (8oz)
710,000 hours
PM529 and PM563 only
Yes
See table
See table
Switching frequency
±0.02%/°C
See table on facing
page for relevant models
Typical
Switch off/on
6.2V typical
Approvals and
standards
Case material
130% to 200% FL
100% to 200% FL
Weight
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Safety ground
leakage current
PM500, See Note 3
VM500
See tables below
47Hz to 400Hz
47Hz to 63Hz
Less than 3.5mA
@ 50Hz
MTBF
See Note 4
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating amb.
–25°C to +71°C
Non-operating amb. –25°C to +85°C
Derating, 50°C to 71°C
2.5%/°C
Cooling
Free-air convection
Non-condensing
20% to 95% RH
Encapsulated
Relative Humidity
Vibration
PM500 INPUT VOLTAGE
115±10VAC
220±20VAC
240±20VAC
SUFFIX
(NONE)
D
K
VM534D INPUT VOLTAGE
200 to 233VAC
SUFFIX
D
PAGE 1
AC/DC POWER SUPPLIES
|
1.0-10.5W AC
1 to 10.5 Watt
AC/DC encapsulated modules
OUTPUT
VOLTAGE
OUTPUT
CURRENT
OVP
REGULATION
LINE
LOAD
RIPPLE AND
NOISE
CASE
AVAILABLE MODELS
110VAC
220VAC
240VAC
SINGLE OUTPUT
5VDC
5VDC
5VDC
5VDC
5VDC
12VDC
12VDC
12VDC
24VDC
24VDC
24VDC
250mA
500mA
500mA
1000mA
2000mA
240mA
400mA
600mA
100mA
200mA
400mA
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.04%
±0.04%
±0.04%
±0.04%
±0.05%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
1mV rms
1mV rms
2.8mV rms
1mV rms
1mV rms
0.5mV rms
1mV rms
1mV rms
0.5mV rms
0.5mV rms
1mV rms
(1)
B1
B1
B1
B2
B3
B2
B3
B3
B2
B3
B3
PM542
PM545
PM515
PM534
PM533D
PM534D
VM534D
PM542D
PM545D
PM515D
PM516D
PM517D
PM566D
PM567D
PM568D
PM542K
PM545K
PM534K
SUB MINIATURE SINGLE OUTPUT SERIES
5VDC
12VDC
250mA
100mA
No
No
±0.05%
±0.02%
±0.05%
±0.02%
DUAL OUTPUT
±12VDC
±12VDC
±12VDC
±15VDC
±15VDC
±15VDC
±15VDC
±120mA
±240mA
±400mA
±25mA
±100mA
±200mA
±350mA
No
No
No
No
No
No
No
±0.02%
±0.02%
±0.02%
±0.20%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.02%
±0.20%
±0.02%
±0.02%
±0.02%
TRIPLE OUTPUT
5V/±12VDC
5V/±12VDC
300/±180mA
500/±120mA
No
No
Yes
Yes
Yes
Yes
±0.02%
±0.02%
±0.02%
±0.05%
±0.05%
±0.02%
±.05%/±.02%
±.05%/±.02%
±.01%/±.02%
±.10%/±.05%
±.10%/±.05%
±.01%/±.02%
0.5mV rms
0.5mV rms
0.5mV rms
2mV rms
0.5mV rms
0.5mV rms
1mV rms
(2)
0.5mV rms
0.5mV rms
H
A
PM529
PM563
PM529D
PM563D
PM529K
B1
B2
B3
B1
B1
B2
B3
PM536
PM536D
PM537D
PM597
PM538
PM505
PM565
PM501
PM597D
PM597K
PM505D
PM565D
PM501D
PM501K
0.5mV rms
0.5mV rms
1.0/0.5mV rms
0.5mV rms
0.5mV rms
1.0/0.5mV rms
B2
B2
B3
B2
B2
B3
PM595S
PM595DS
PM591D
5V/±12VDC 1000/±150mA
5V/±15VDC
5V/±15VDC
300/±150mA
500/±100mA
PM592
PM594
PM590
PM593
PM592D
PM594DS
PM590D
PM593D
PM590K
PM593K
5V/±15VDC 1000/±150mA
Notes
1
Trim connection on all sub-miniature series modules provides a means of
externally adjusting a units output voltage precisely to its labelled value. To
raise the output voltage, connect a resistance (20kΩ, min.) between the
trim terminal and the positive (+) output terminal. To lower the output
voltage, connect a resistance (20kΩ, min.) between the trim terminal and
the negative (–) output terminal.
Triple output models only: on standard pin-out models the 5V output
common is isolated from the ±12VDC or ±15VDC common.
Some units should be derated for operation at 400Hz. Please contact the
factory for details.
M.T.B.F. figures are based on actual product performance. Consult factory
for details.
All models are only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
0.50 (12.7)
0.60 (15.2)
VM534D
2.50
(63.5)
0.50 (12.7)
0.60 (15.2)
0.15
(3.8)
0.88
(22.4)
2
3
4
5
NC
- OUT
OUT
+
1.60
(40.6)
3.50
(88.9)
1.60
(40.6)
AC
CASE
B1
INSERTS
4.40 THREAD
0.125 (3.2) DEEP
AC
2.20
(55.9)
0.040 (1.0)
DIA. PINS
0.20
(5.1)
MIN.
SINGLE OUTPUT MODEL
ALL DIMENSIONS IN INCHES (mm)
http://www.artesyn.com
PAGE 2
AC/DC POWER SUPPLIES
|
1.0-10.5W AC
1 to 10.5 Watt
AC/DC encapsulated modules
Single output PM500 series
CASE A
1.75
(44.5)
1.20
(30.5)
0.275
(7.1)
0.20 (5.1)
0.60
(15.2)
1.00
(25.4)
2.00
(50.8)
CASE H
1.60
(40.6)
CASE B
2.50
(63.5)
1.00
(25.4)
0.50 (12.7)
0.50 (12.7)
0.20
(5.1)
0.50 (12.7)
0.60 (15.2)
0.50 (12.7)
0.60 (15.2)
0.15
(3.8)
0.20
(5.1)
– OUT
– OUT OUT +
1.62
(41.1)
1.25
(31.8)
0.88
(22.4)
NC
- OUT
TRIM
0.80
(20.3)
2.25
(57.2)
1.80
(45.7)
TRIM
0.40
(10.2)
1.55
(39.4)
3.00
(76.2)
2.60
(66.0)
OUT
+
1.60
(40.6)
3.50
(88.9)
1.60
(40.6)
AC
B1 B2 B3
+ OUT
INSERT
4.40 THREAD
0.12 (3.0) DEEP
AC
INSERT
4.40 THREAD
0.12 (3.0) DEEP
AC
AC
INSERT
4.40 THREAD
0.125 (3.2) DEEP
AC
AC
0.040 (1.0) DIA. PINS
0.20
(5.1)
MIN.
0.040 (1.0)
DIA. PINS
0.20
(5.1)
MIN.
2.20
(55.9)
0.040 (1.0)
DIA. PINS
0.20
(5.1)
MIN.
ALL DIMENSIONS IN INCHES (mm)
R
1
(20K
MIN.)
OR
R
2
(20K
MIN.)
– OUT
+ OUT
TRIM
SUB-MINIATURE
SERIES
Dual and triple output PM500 series
CASE B
DUAL OUTPUT
MODELS
2.50
(63.5)
0.60 (15.2)
0.50 (12.7)
0.50 (12.7)
0.60 (15.2)
0.60 (15.2)
CASE B
TRIPLE OUTPUT MODELS
STANDARD PINOUT
2.50
(63.5)
0.50 (12.7)
0.50 (12.7)
0.60 (15.2)
CASE B
TRIPLE OUTPUT MODELS
ALTERNATE PINOUT SUFFIX '-S'
2.50
(63.5)
0.55 (14.0)
0.55 (14.0)
0.55 (14.0)
SIDE VIEW
0.15
(3.8)
+ OUT
0.15
(3.8)
COM 5V
+
0.55 (14.0)
0.15
(3.8)
+
1.62
(41.1)
1.25
(31.8)
0.88
(22.4)
- OUT
COM
COM
5V
COM
+ 5V
1.60
(40.6)
3.50
(88.9)
1.60
(40.6)
3.50
(88.9)
COM
+ 5V
-
-
1.60
(40.6)
3.50
(88.9)
INSERTS
4.40 THREAD
0.125 (3.2) DEEP
AC
AC
1.60
(40.6)
AC
INSERTS
4.40 THREAD
0.125 (3.2) DEEP
AC
1.60
(40.6)
AC
INSERTS
4.40 THREAD
0.125 (3.2) DEEP
AC
1.60
(40.6)
B1 B2 B3
2.20
(55.9)
2.20
(55.9)
2.00
(50.8)
0.040 (1.0)
DIA. PINS
ALL DIMENSIONS IN INCHES (mm)
0.20
(5.1)
MIN.
International Safety Standard Approvals
IEC950 Certificate No. IDP080 (VM534D only)
UL478 Reg. File No. E131987
CSA22.2-143 and -154 Reg. File No. LR59996
PAGE 3
Question + What model is the onboard emulator on the msp430G2 board?
rt, what is the model of the onboard emulator on the msp430G2 board? I saw the onboard emulator above, but I am curious about what model it is? And can it be used for other chips? Which chips can it b...
gkcn Microcontroller MCU
EETALK - Tell me about a "thrilling" scam that I personally experienced. Everyone, please share some of the tricks you have experienced to prevent forum friends from being deceived
I just watched a video today about teasing someone who sells iPhones at a low price at a train station. It suddenly reminded me of my own experience in college. It happened many years ago, so I will t...
shinykongcn Talking
Are serial port read and write functions synchronous?
When writing to the serial port through writefile in WINCE, I originally thought that this function should be blocking and synchronized with the serial port sending process, that is, the function can ...
arm86 Embedded System
A very tricky problem about hard disk reading and writing
Can anyone tell me how the hard disk is read and written from the time the computer is powered on to the time the Windows interface opens? Some say it is through the int 13h interrupt, others say it i...
weimingqiang Embedded System
RS232 serial port data problem
I have a Siemens CT machine! In the past, images were transmitted using Dicom! Now, it has to be transmitted using RS232 serial port! I would like to ask everyone: what will the format of the transmit...
vv0147 Embedded System
Questions about the IXP425 development platform?
How much does a 24-port multi-network motherboard cost? What is the development platform for IXP425? Does the manufacturer provide a development platform? What else does the manufacturer need to provi...
wenhanbin Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 650  803  575  880  1706  14  17  12  18  35 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号