Nil: Standard PC board terminal or surface-mount terminal
Nominal coil voltage (DC)*
1.5, 3, 4.5, 5, 6, 9, 12, 24, 48V
Contact material
TH: Power type (Ag+Au clad/stationary, movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
TH
ds_61022_en_txth: 100214J
1
TX-TH
TYPES
1. Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
48V DC
Single side stable
Part No.
TX2-1.5V-TH
TX2-3V-TH
TX2-4.5V-TH
TX2-5V-TH
TX2-6V-TH
TX2-9V-TH
TX2-12V-TH
TX2-24V-TH
TX2-48V-TH
1 coil latching
Part No.
TX2-L-1.5V-TH
TX2-L-3V-TH
TX2-L-4.5V-TH
TX2-L-5V-TH
TX2-L-6V-TH
TX2-L-9V-TH
TX2-L-12V-TH
TX2-L-24V-TH
—
2 coil latching (L2)
Part No.
TX2-L2-1.5V-TH
TX2-L2-3V-TH
TX2-L2-4.5V-TH
TX2-L2-5V-TH
TX2-L2-6V-TH
TX2-L2-9V-TH
TX2-L2-12V-TH
TX2-L2-24V-TH
—
2 coil latching (LT)
Part No.
TX2-LT-1.5V-TH
TX2-LT-3V-TH
TX2-LT-4.5V-TH
TX2-LT-5V-TH
TX2-LT-6V-TH
TX2-LT-9V-TH
TX2-LT-12V-TH
TX2-LT-24V-TH
—
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
2. Surface-mount terminal
1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
2c
6V DC
9V DC
12V DC
24V DC
48V DC
Single side stable
Part No.
TX2S
-1.5V-TH
TX2S
-3V-TH
TX2S
-4.5V-TH
TX2S
-5V-TH
TX2S
-6V-TH
TX2S
-9V-TH
TX2S
-12V-TH
TX2S
-24V-TH
TX2S
-48V-TH
1 coil latching
Part No.
TX2S
-L-1.5V-TH
TX2S
-L-3V-TH
TX2S
-L-4.5V-TH
TX2S
-L-5V-TH
TX2S
-L-6V-TH
TX2S
-L-9V-TH
TX2S
-L-12V-TH
TX2S
-L-24V-TH
—
2 coil latching (L2)
Part No.
TX2S
-L2-1.5V-TH
TX2S
-L2-3V-TH
TX2S
-L2-4.5V-TH
TX2S
-L2-5V-TH
TX2S
-L2-6V-TH
TX2S
-L2-9V-TH
TX2S
-L2-12V-TH
TX2S
-L2-24V-TH
—
2 coil latching (LT)
Part No.
TX2S
-LT-1.5V-TH
TX2S
-LT-3V-TH
TX2S
-LT-4.5V-TH
TX2S
-LT-5V-TH
TX2S
-LT-6V-TH
TX2S
-LT-9V-TH
TX2S
-LT-12V-TH
TX2S
-LT-24V-TH
—
: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
Single side stable
Part No.
TX2S
-1.5V-TH-Z
TX2S
-3V-TH-Z
TX2S
-4.5V-TH-Z
TX2S
-5V-TH-Z
TX2S
-6V-TH-Z
TX2S
-9V-TH-Z
TX2S
-12V-TH-Z
TX2S
-24V-TH-Z
TX2S
-48V-TH-Z
1 coil latching
Part No.
TX2S
-L-1.5V-TH-Z
TX2S
-L-3V-TH-Z
TX2S
-L-4.5V-TH-Z
TX2S
-L-5V-TH-Z
TX2S
-L-6V-TH-Z
TX2S
-L-9V-TH-Z
TX2S
-L-12V-TH-Z
TX2S
-L-24V-TH-Z
—
2 coil latching (L2)
Part No.
TX2S
-L2-1.5V-TH-Z
TX2S
-L2-3V-TH-Z
TX2S
-L2-4.5V-TH-Z
TX2S
-L2-5V-TH-Z
TX2S
-L2-6V-TH-Z
TX2S
-L2-9V-TH-Z
TX2S
-L2-12V-TH-Z
TX2S
-L2-24V-TH-Z
—
2 coil latching (LT)
Part No.
TX2S
-LT-1.5V-TH-Z
TX2S
-LT-3V-TH-Z
TX2S
-LT-4.5V-TH-Z
TX2S
-LT-5V-TH-Z
TX2S
-LT-6V-TH-Z
TX2S
-LT-9V-TH-Z
TX2S
-LT-12V-TH-Z
TX2S
-LT-24V-TH-Z
—
2 Form C
: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2
ds_61022_en_txth: 100214J
TX-TH
RATING
1. Coil data
1) Single side stable
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
Pick-up voltage
(at 20C
68F)
Drop-out voltage
(at 20C
68F)
Nominal operating
current
[10%] (at 20C
68F)
93.8mA
46.7mA
31mA
28.1mA
23.3mA
15.5mA
11.7mA
5.8mA
5.6mA
Coil resistance
[10%] (at 20C
68F)
16
64.3
145
178
257
579
1,028
4,114
8,533
270mW
120%V of
nominal voltage
140mW
150%V of
nominal voltage
Nominal operating
power
Max. applied voltage
(at 20C
68F)
2) 1 coil latching
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
Set voltage
(at 20C
68F)
Reset voltage
(at 20C
68F)
Nominal operating
current
[10%] (at 20C
68F)
66.7mA
33.3mA
22.2mA
20mA
16.7mA
11.1mA
8.3mA
4.2mA
Coil resistance
[10%] (at 20C
68F)
22.5
90
202.5
250
360
810
1,440
5,760
150%V of
nominal voltage
Nominal operating
power
Max. applied voltage
(at 20C
68F)
100mW
3) 2 coil latching (L2, LT)
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Set voltage
(at 20C
68F)
Reset voltage
(at 20C
68F)
Nominal operating
current
[10%] (at 20C 68F)
Set coil
Reset coil
93.8mA
46.7mA
31mA
28.1mA
23.3mA
15.5mA
11.7mA
5.8mA
93.8mA
46.7mA
31mA
28.1mA
23.3mA
15.5mA
11.7mA
5.8mA
Coil resistance
[10%] (at 20C
68F)
Set coil
16
64.3
145
178
257
579
1,028
4,114
Reset coil
16
64.3
145
178
257
579
1,028
4,114
Nominal operating
power
Set coil
Reset coil
Max. applied voltage
(at 20C
68F
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
140mW
140mW
150%V of
nominal voltage
*Pulse drive (JIS C 5442-1986)
ds_61022_en_txth: 100214J
3
TX-TH
2. Specifications
Characteristics
Contact
Item
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)
*1
Single side stable
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Between open contacts
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Temperature rise (at 20C
68F)
Between open contacts
Surge breakdown
voltage (Initial)
Between contacts and coil
Operate time [Set time] (at 20C
68F)
Release time [Reset time] (at 20C
68F)
Functional
Shock resistance
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Specifications
2 Form C
Max. 100 m (By voltage drop 6 V DC 1A)
Ag+Au plating
2 A 30 V DC, 0.5 A 125 V AC (resistive load)
60 W, 60 VA (resistive load)
220V DC, 250V AC
7.5 A (When used at 7.5 A. Regarding connection method, you must follow the precaution, below*.)
10A 10mV DC
140 mW (1.5 to 24 V DC), 270 mW (48 V DC)
100 mW (1.5 to 24 V DC)
140 mW (1.5 to 24 V DC)
Min. 1,000M (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA)
2,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
1,500 V (10160s) (FCC Part 68)
2,500 V (210s) (Telcordia)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Min. 750 m/s
2
(Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Min. 10
8
(at 180 times/min.)
Min. 10
5
(2 A 30 V DC resistive), 510
5
(1 A 30 V DC resistive),
Min. 10
5
(0.5 A 125 V AC resistive) (at 20 times/min.)
Min. 210
5
(7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cos = 0.4)) (ON/OFF = 1s/9s)
Ambient temperature: –40C to +85C (up to 24 V coil)
–40F to +185F
[–40C to +70C (48 V coil)
–40F to +158F];
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min.
Approx. 2 g
.071 oz
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
*1
*2
Conditions for operation, transport and storage
*2
Max. operating speed (at rated load)
This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
Refer to “6. Usage, Storage and Transport Conditions“ in
AMBIENT ENVIRONMENT section in Relay Technical Information.
4
ds_61022_en_txth: 100214J
TX-TH
REFERENCE DATA
1. Electrical life (2
10
5
operation is possible)
Tested sample: TX2SA-24V-TH, 6 pcs.
Switching frequency: ON:OFF = 1s:9s
Ambient temperature: 25C
77F
Circuit
COM1
NO1
Detection
Circuit
AC30V
60Hz
24V
Condition: 30 V AC
Inrush current 7.5 A (execution value),
inrush time 250 ms
Normal current 1.5 A (execution value),
(inductive load cos = 0.4)
Inrush current wave form vs time
12
Contact current, A
8
4
0
-4
-8
-12
–
+
Contact Weld
Min 0.5s
Miss Contact
after 0.2s
G
Time (ms), Interval (200ms)
*Precaution
When using at 7.5 A, connection of NO
(pin #5 and #8) and COM (pin #4 and #9)
in the circuit is required.
Pin layout and schematic (BOTTOM VIEW)
1 coil latching
Load
For general REFERENCE DATA, DIMENSIONS and NOTES, see
The real temperature test data is measured by heating a basin of water with a heating rod. The X-axis is time in seconds and the Y-axis is temperature:
1) Before filtering2) After filtering (p=10, q=0...
[size=3] Reprinted on July 7, 2008, font size: 1. When you meet beggars: If you meet someone who wants money, give him/her some food; if you meet someone who wants food, give him/her some money. 2. Wh...
[size=5]How many times have you exercised this month? October is already halfway through, and I haven’t exercised enough this month. Do you still remember the promise you made at that time?{:1_85:}Loo...
It’s a beautiful spring day, why not take a photo, take a photo, why not share a photo,
At this time, the flowers of love are in full bloom.
The first one is a thousand-leaf spider plant, which sheds ...
A Bluetooth temperature sensor with mobile measurement and wireless transmission was developed. Methods: High-precision sensor technology and emerging Bluetooth technology were combined, and based on ...
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
AD8205 is
a single-supply high-performance differential
amplifier
launched by
Analog
Devices of the United States
. The typical single-supply voltage is 5V, and its common-mode volta...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
