Specification
:
TE -module
PE1-12704AC
Issue 2
Issued: 29/05/2008
1/2
SPECIFICATION
Product:Thermoelectric module
Part Number:PE1-12704AC
1. Scope
1—1
1—2
This specification is applied to Multicomp thermoelectric modules
Revision of these specifications is carried out after consent.
2. Specification
2-1
Parameters
Parameters
Internal resistance
Imax.
Vmax.
Th=27℃
Qmax.
⊿Tmax.
solder melting point
Maximum. compress
.
35.2 W
70
℃
235
℃
1MPa
3.5
Ω
±
10%
3.9 A
15.7 V
Th=50℃
39 W
77
℃
Note-4
Note-5
Note-6
Note-7
Remarks
Note-1
Note-2
Note-3
Note-1 Measured by AC 4-terminal method at 25℃.
Note-2 Maximum current at
⊿Tmax.
Note-3 Maximum voltage at
⊿Tmax.
Note-4 Maximum cooling capacity at Imax.,Vmax. and
⊿T=0℃.
Note-5 Maximum temperature difference at Imax.,Vmax. and Q=0W.
(Maximum
parameters are measured in a vacuum 1.3P)
Note-6 The solder melting point of thermoelectric module
Note-7 Recommended maximum compression (not destruction limit)
2-2
Recommendations:
- Operating range: -40
℃
to +100
℃
- Dropping or exerting mechanical shock will cause breakage, take care in handling
- Thinly spread thermally conductive grease should be placed between module and heat exchanger
- Surface deviation from flatness should be kept under 0.02mm
- For optimum reliability and performance it is recommended that the module be utilised <0.7 I max
2 – 3 Outline Drawing