600 Series
Remote Annunciators
Description
The 600 Series remote annunciators (RAN2 and RAN2-
RC) provide remote display and control capabilities. Each
RAN device is connected to the main 600 Series Fire
Alarm Control Panel (FACP) via a serial communications
port. The RAN interprets the instructions from the main
FACP, initiating its own programmed response, and
retransmitting the instructions to the next device.
Gamewell-FCI 600 Series systems can accommodate up
to 64 devices connected to the serial communications port.
In addition to the Remote Annunciator (RAN2), these
devices include Serial Annunciator drives (SAN) and
Remote Printer Interfaces (RPI). These devices comprise
the Gamewell-FCI Status Control Network. Each device
contains its own microprocessor and can be programmed
independently. A network of devices can be programmed
directly from a single device, saving valuable installation
time.
The Remote Alphanumeric Display (RAN2) is fully super-
vised and has dual serial ports for network connection. The
RAN2 family displays the user text from the main system.
The remote control version (RAN2-RC) has seven
switches: Remote Acknowledge, Reset, Signal Silence,
Lamp Test, Display 1st Event, Display Next Event, Display
Previous Event.
The basic RAN2 has a scroll switch only. The scroll switch
is used to review multiple events on the system. The
remote control versions are provided with a seven-position
switch bank and eight LEDs for system annunciation. The
switches provide remote control of the connected system.
A key switch enables and disables the switches to prevent
unauthorized operation.
The Status Control Network is connected to the main 600
Series control panel via an EIA-232 data communications
line. The SIM-232 module is used to provide an isolated
EIA-232 output from the main CPU of the IF632, IF654,
RAN2, RAN2-RC
600 Series RAN2, RAN2-RC Models
Features
• Backlit LCD alphanumeric display,
4-lines by 40-characters.
• Up to 64 devices supported on a single 600 Series
control panel.
• Field-programming via PC.
• Dual optically-isolated serial ports.
• Microprocessor controlled.
• Supervised.
• Allows remote system control.
• Surface-mount and flush-mount models available.
• Adjustable viewing angle.
• Network monitoring capabilities.
An ISO 9000-2000 Company
SIGNALING
FM
S521
APPROVED
7120-1288:149
GAMEWELL-FCI
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
CS-2025 Rev. A page 1 of 2
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
g2025ph1.jpg
and IF658 FACPs. The IF602 and IF610 have a built-in
EIA-232 port.
Specifications
Input Power:
Standby Current:
Alarm Current:
Operating
Temperature:
Relative Humidity:
Protocol (Xon/Xoff)
Dimensions:
Surface Mount (-S):
20-30 VAC or VDC
0.04A normal (backlight off)
0.04A plus external load
+34° F to +120° F (0° C to +49° C)
93% non-condensing
2400 baud, non parity, 8 data bits,
1 stop bit
Applications
Remote alphanumerics are ideal wherever text-based
annunciation of system activity is required. Since the RAN
can also control system activity, no additional hardware is
needed to complete a status and command center for a
system of any size.
Engineer’s Specifications
Remote annunciation and control for the main control panel
shall be supplied where indicated. Remote annunciation
and control shall be accomplished via the EIA-232 data
communications line. It shall be possible to add up to 64
devices to the communication line. It shall be possible to
mix serial annunciators, printers and LCD alphanumeric
displays on a single line without the need for special soft-
ware. Devices shall not be placement-sensitive. All devices
shall
5.125" H x 9.875" W
(13.018 H x 25.083 W cm)
Flush mount (–F):
6.125" H x 10.875" W
(15.558 H x 27.623 W cm)
Backbox (RAN2-BB):
5.25" H x 10.10" W x 2.44" D
(13.335 H x 25.654 W x 6.198 D cm)
Ordering Information
Part Number Description
RAN2-S
RAN2-F
RAN2-RCS
Remote annunciator, surface mount,
4-line x 40-character alphanumeric display.
Remote annunciator, flush mount,
4-line x 40-character alphanumeric display.
Remote annunciator, surface mount,
4-line x 40-character alphanumeric display
with remote control.
Remote annunciator, flush mount,
4-line x 40-character alphanumeric display
with remote control.
Serial interface module, mounts in 600
Series control (IF632, IF654, IF658) to
supply EIA-232 outputs.
Not required for IF602 and IF610 systems.
Programming cable
(remote annunciators programmed via PC-
based “SAN Program”).
RAN2-RCF
SIM-232
70703
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2025 Rev. A page 2 of 2
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
